Download or read book Machining and Machinability of Fiber Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries.

Download or read book Machinability of Fibre Reinforced Plastics written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-06-16 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents polymer-based fibre reinforced composite materials and addresses the characteristics of these widely used materials like low density and coefficient of thermal expansion, specific strength with better fatigue resistance and modulus. The topics discussed are laser-based material machining, high-speed robotic end milling and LFRP modeling, including definitions, features, machine elements (system set-up) as well as experimental and theoretical investigations. These investigations include effects of input variables (tool rotation speed, feed rate and ultrasonic power) on cutting force, torque, cutting temperature, edge quality, surface roughness, burning of machined surface, tool wear, material removal rate, power consumption and feasible regions. Further a detailed literature review on drilling polymer composites with a focus on delamination is included. Aspects such as delamination mechanisms, fabrication methods, the type of drilling process adopted by various researchers, cutting parameters employed during drilling, mathematical delamination modelling, effect of thrust force, spindle speed, thermal loads, tool wear, surface roughness, tool geometry and tool materials on delamination and hole quality are summarized. In addition an approach of digital image processing in delamination assessment completes the approach. - Discusses Carbon Fiber Reinforced Plastics modern technologies for automated, highly productive and cost efficient processing. - Great value for final undergraduate engineering courses or as a topic on manufacturing with FRPs at the postgraduate level as well as a useful reference for academics, researchers, manufacturing, mechanical and materials engineers, professionals in machining of FRPs and related industries.

Download or read book Machining of Polymer Composites written by Jamal Ahmad and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume will serve as an indispensable reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a comprehensive treatment of the theory of machining as it applies to fiber reinforced polymer composites. It covers the latest technical advances in the area of machining and tooling, and discusses the applications of fiber reinforced polymer composites in the aircraft and automotive industries.

Download or read book Machining Technology for Composite Materials written by H Hocheng and published by Elsevier. This book was released on 2011-11-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining processes play an important role in the manufacture of a wide variety of components. While the processes required for metal components are well-established, they cannot always be applied to composite materials, which instead require new and innovative techniques. Machining technology for composite materials provides an extensive overview and analysis of both traditional and non-traditional methods of machining for different composite materials.The traditional methods of turning, drilling and grinding are discussed in part one, which also contains chapters analysing cutting forces, tool wear and surface quality. Part two covers non-traditional methods for machining composite materials, including electrical discharge and laser machining, among others. Finally, part three contains chapters that deal with special topics in machining processes for composite materials, such as cryogenic machining and processes for wood-based composites.With its renowned editor and distinguished team of international contributors, Machining technology for composite materials is an essential reference particularly for process designers and tool and production engineers in the field of composite manufacturing, but also for all those involved in the fabrication and assembly of composite structures, including the aerospace, marine, civil and leisure industry sectors. - Provides an extensive overview of machining methods for composite materials - Chapters analyse cutting forces, tool wear and surface quality - Cryogenic machining and processes for wood based composites are discussed

Download or read book Drilling of Polymer Matrix Composites written by Vijayan Krishnaraj and published by Springer Science & Business Media. This book was released on 2013-07-08 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief focus on drilling of polymer matrix composites for aerospace and defence applications. It gives an introduction to machining of polymer composites and discusses drilling as a processing of composites.

Download or read book Drilling of Composite Materials written by J. Paulo Davim and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the use of composite materials has increased in various areas of science and technology due to their special properties, namely for these application in aircraft, automotive, defence and aerospace industries as well others advanced industries. Drilling is a frequently practised machining process in modern industry owing to the need for component assembly in composite structures. This book aims to provide the research and review studies in drilling of composite materials. The first three chapters provide information on delamination and damage reduction in drilling of composite materials. The following two chapters deal with influence of machining parameters on the delamination. The sixth chapter is focused on modelling of drilling aluminium matrix composites using artificial neural networks. The chapter seventh is dedicated study of analysis of delamination in drilling wood composite medium density fibreboards. Finally, the last chapter of this book is focused on studies on composite drilling - the state of the art. The present research book can be used as for final undergraduate engineering course (for example, mechanical, manufacturing, materials etc) or as a subject on machining/composites at the postgraduate level. Also, this research book can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing, materials and mechanical engineers, professional in composites technology and related industries.

Download or read book Composites Manufacturing written by Sanjay Mazumdar and published by CRC Press. This book was released on 2001-12-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental

Download or read book Advances in Machining of Composite Materials written by Islam Shyha and published by Springer Nature. This book was released on 2021-06-21 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.

Download or read book Manufacturing of Natural Fibre Reinforced Polymer Composites written by Mohd Sapuan Salit and published by Springer. This book was released on 2015-09-10 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fibre composite is an emerging material that has great potential to be used in engineering application. Oil palm, sugar palm, bagasse, coir, banana stem, hemp, jute, sisal, kenaf, roselle, rice husk, betul nut husk and cocoa pod are among the natural fibres reported to be used as reinforcing materials in polymer composites. Natural fibre composites were used in many industries such as automotive, building, furniture, marine and aerospace industries. The advantages of natural fibre composites include low cost, renewable, abundance, light weight, less abrasive and they are suitable to be used in semi or non-structural engineering components. Research on various aspects of natural fibre composites such as characterization, determination of properties and design have been extensively carried out. However, publications that reported on research of manufacture of natural fibre composites are very limited. Specifically, although manufacturing methods of components from natural fibre composites are similar to those of components from conventional fibre composites such as glass, carbon and Kevlar fibres, modification of equipment used for conventional fibre composites may be required. This book fills the gap of knowledge in the field of natural fibre composites for the research community. Among the methods reported that are being used to produce components from natural fibre composites include hand lay-up, compression moulding, filament winding, injection moulding, resin transfer moulding, pultrusion and vacuum bag moulding. This book is also intended to address some research on secondary processing such as machining and laser welding of natural fibre composites. It is hoped that publication of this book will provide the readers new knowledge and understanding on the manufacture of natural fibre composites.

Download or read book Mechanical and Dynamic Properties of Biocomposites written by Senthilkumar Krishnasamy and published by John Wiley & Sons. This book was released on 2021-06-21 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Dynamic Properties of Biocomposites A comprehensive review of the properties of biocomposites and their applications Mechanical and Dynamic Properties of Biocomposites offers a comprehensive overview of the mechanical and dynamic properties of biocomposites and natural fiber-reinforced polymer composites. This essential resource helps with materials selection in the development of products in the fields of automotive and aerospace engineering as well as the construction of structures in civil engineering. With contributions from a panel of experts in the field, the book reviews the mechanical and damping properties of lingo-cellulosic fibers and their composites. The authors highlight the factors that contribute to the improved properties and their advancements in modern industrialization. Besides, the book is designed to (a) introduce the mechanical and damping properties of lingo-cellulosic fibers and their composites, (b) factors that contribute to improvement in properties such as hybridization, chemical treatment of natural fibers, additive or fillers, etc. and (c) the real-time applications with case studies and future prospects. Key features: Presents viable alternatives to conventional composites Examines the environmentally friendly and favorable mechanical properties of biocomposites Reviews the potential applications of biocomposites in the fields of automotive, mechanical and civil engineering Brings together in one comprehensive resource information found scattered across the professional literature Written for materials scientists, polymer chemists, chemists in industry, civil engineers, construction engineers, and engineering scientists in industry, Mechanical and Dynamic Properties of BIocomposites offers a compreshensive review of the properties and applications of biocomposites.

Download or read book Hybrid Fiber Composites written by Anish Khan and published by John Wiley & Sons. This book was released on 2020-09-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced composites are exceptionally versatile materials whose properties can be tuned to exhibit a variety of favorable properties such as high tensile strength and resistance against wear or chemical and thermal influences. Consequently, these materials are widely used in various industrial fields such as the aircraft, marine, and automobile industry. After an overview of the general structures and properties of hybrid fiber composites, the book focuses on the manufacturing and processing of these materials and their mechanical performance, including the elucidation of failure mechanisms. A comprehensive chapter on the modeling of hybrid fiber composites from micromechanical properties to macro-scale material behavior is followed by a review of applications of these materials in structural engineering, packaging, and the automotive and aerospace industries.

Download or read book High Speed Machining written by Kapil Gupta and published by Academic Press. This book was released on 2020-01-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Speed Machining covers every aspect of this important subject, from the basic mechanisms of the technology, right through to possible avenues for future research. This book will help readers choose the best method for their particular task, how to set up their equipment to reduce chatter and wear, and how to use simulation tools to model high-speed machining processes. The different applications of each technology are discussed throughout, as are the latest findings by leading researchers in this field. For any researcher looking to understand this topic, any manufacturer looking to improve performance, or any manager looking to upgrade their plant, this is the most comprehensive and authoritative guide available. - Summarizes important R&D from around the world, focusing on emerging topics like intelligent machining - Explains the latest best practice for the optimization of high-speed machining processes for greater energy efficiency and machining precision - Provides practical advice on the testing and monitoring of HSM machines, drawing on practices from leading companies

Download or read book Machining of Ceramics and Composites written by Jahanmir and published by CRC Press. This book was released on 1999-01-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting modern advances in the machining of ceramics and composites, this work offers broadly based, fundamental information for selecting the appropriate machining processes and parameters, developing successful manufacturing strategies, and designing novel machining systems. It focuses on scientific and engineering developments affecting the present and future of machining processes.

Download or read book Sustainable Composites for Aerospace Applications written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2018-04-27 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Composites for Aerospace Applications presents innovative advances in the fabrication, characterization and applications of LDH polymer nanocomposites. It covers fundamental structural and chemical knowledge and explores various properties and characterization techniques, including microscopic, spectroscopic and mechanical behaviors. Users will find a strong focus on the potential applications of LDH polymer nanocomposites, such as in energy, electronics, electromagnetic shielding, biomedical, agricultural, food packaging and water purification functions. This book provides comprehensive coverage of cutting-edge research in the field of LDH polymer nanocomposites and future applications, and is an essential read for all academics, researchers, engineers and students working in this area. - Presents fundamental knowledge of LDH polymer nanocomposites, including chemical composition, structural features and fabrication techniques - Provides an analytical overview of the different types of characterization techniques and technologies - Contains extensive reviews on cutting-edge research for future applications in a variety of industries

Download or read book Forming and Machining of Polymers Ceramics and Composites written by Matruprasad Rout and published by CRC Press. This book was released on 2024-11-04 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forming and Machining of Polymers, Ceramics, and Composites targets the two important manufacturing processes where plastic deformation is involved to give the required shape and size to the raw material. The main goal of the book is to represent the recent developments in the field of forming and machining of different non-metals, especially polymers, composites, and ceramics. Special focus is on the advancement of these processes to manufacture components from these non-metals. Presents exclusive material dedicated to forming and machining of non-metals, that is, polymers, ceramics, and composites Provides comprehensive coverage of all important topics related to non-metals processing Covers basics and current research in the field of forming and machining of non-metals Focuses on sustainability interventions and intelligent manufacturing techniques for quality and productivity in forming and machining of non-metals Discusses conventional and non-conventional machining and microfabrication aspects for fabrication and processing of non-metals This book is aimed at graduate students and researchers in materials processing and machine design.

Download or read book Self Doped Conducting Polymers written by Michael S. Freund and published by John Wiley & Sons. This book was released on 2007-03-13 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-Doped Conducting Polymers provides an introduction to conducting polymers in general and self-doped conducting polymers in particular. This is followed by an in depth exploration of the synthesis, properties and utilization of several types of self-doped polymers. Optimization of self-doped polymers is also discussed.

Download or read book Advances in Industrial Automation and Smart Manufacturing written by A. Arockiarajan and published by Springer Nature. This book was released on 2020-10-20 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected peer-reviewed proceedings of the International Conference on Advances in Industrial Automation and Smart Manufacturing (ICAIASM) 2019. The contents focus on innovative manufacturing processes, standards and technologies used to implement Industry 4.0, and industrial IoT based environment for smart manufacturing. The book particularly emphasizes on emerging industrial concepts like industrial IoT and cyber physical systems, advanced simulation and digital twin, wireless instrumentation, rapid prototyping and tooling, augmented reality, analytics and manufacturing operations management. Given the range of topics covered, this book will be useful for students, researchers as well as industry professionals.