Download or read book Machinery Prognostics and Prognosis Oriented Maintenance Management written by Jihong Yan and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a complete presentatin of the basic essentials of machinery prognostics and prognosis oriented maintenance management, and takes a look at the cutting-edge discipline of intelligent failure prognosis technologies for condition-based maintenance. Presents an introduction to advanced maintenance systems, and discusses the key technologies for advanced maintenance by providing readers with up-to-date technologies Offers practical case studies on performance evaluation and fault diagnosis technology, fault prognosis and remaining useful life prediction and maintenance scheduling, enhancing the understanding of these technologies Pulls togeter recent developments and varying methods into one volume, complemented by practical examples to provide a complete reference

Download or read book Proceedings of the 27th International Conference on Systems Engineering ICSEng 2020 written by Henry Selvaraj and published by Springer Nature. This book was released on 2021-01-06 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers topics such as AeroSpace Systems, Intelligent Systems, Machine Learning and Analytics, Internet of Things, Applied Media Informatics and Technology, Adaptive Control Systems, Software Engineering and Cyber-Physical Systems. Research in the discipline of Systems Engineering is an important concept in the advancement of engineering and information sciences. Systems Engineering attempts to integrate many of the traditional engineering disciplines to solve large complex functioning engineering systems, dependent on components from all the disciplines. The research papers contained in these proceedings reflect the state of the art in Systems Engineering from all over the world and serve as vital references to researchers to follow. This book is a very good resource for graduate students, researchers and scholars who want to learn about the most recent development in the fields.

Download or read book From Prognostics and Health Systems Management to Predictive Maintenance 1 written by Rafael Gouriveau and published by John Wiley & Sons. This book was released on 2016-10-14 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the steps needed to monitor health assessment systems and the anticipation of their failures: choice and location of sensors, data acquisition and processing, health assessment and prediction of the duration of residual useful life. The digital revolution and mechatronics foreshadowed the advent of the 4.0 industry where equipment has the ability to communicate. The ubiquity of sensors (300,000 sensors in the new generations of aircraft) produces a flood of data requiring us to give meaning to information and leads to the need for efficient processing and a relevant interpretation. The process of traceability and capitalization of data is a key element in the context of the evolution of the maintenance towards predictive strategies.

Download or read book ICPER 2020 written by Faiz Ahmad and published by Springer Nature. This book was released on 2022-10-03 with total page 997 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented in the 7th International Conference on Production, Energy and Reliability (ICPER 2020) under the banner of World Engineering, Science & Technology Congress (ESTCON2020) held from 14th to 16th July 2020 at Borneo Convention Centre, Kuching, Malaysia. The conference contains papers presented by academics and industrial practitioners showcasing their latest advancements and findings in mechanical engineering areas with an emphasis on sustainability and the Industrial Revolution 4.0. The papers are categorized under the following tracks and topics of research: IoT, Reliability and Simulation Advanced Materials, Corrosion and Autonomous Production Efficient Energy Systems and Thermofluids Production, Manufacturing and Automotive

Download or read book Soft Computing in Industry 5 0 for Sustainability written by Kishor Kumar Reddy C. and published by Springer Nature. This book was released on with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction of Intelligent Machine Fault Diagnosis and Prognosis written by O-Suk Yang and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring, fault diagnosis and prognosis of machinery have received considerable attention in recent years and they are increasingly becoming important in industry because of the need to increase reliability and decrease possible loss of production due to the fault of equipments. Early fault detection, diagnosis and prognosis can increase equipment availability and performance, reduce consequential damage, prolong machine life and reduce spare parts inventories and break down maintenance. With the development of the artificial intelligence techniques, many intelligent systems have been employed to assist the maintenance management task to correctly interpret the fault data. The book is very easy to study; even if the reader is a beginner in the fault diagnosis area, they do not need special prerequisite knowledge to understand the contents of this book. The book is equipped with software under MATLAB and offers many examples which are related to fault diagnosis processes. It will be very useful to readers who want to study feature-based intelligent machine fault diagnosis and prognosis techniques. The book is dedicated to graduate students of mechanical and electrical engineering, computer science and for practising engineers.

Download or read book Intelligent Fault Diagnosis and Prognosis for Engineering Systems written by George Vachtsevanos and published by Wiley. This book was released on 2006-09-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert guidance on theory and practice in condition-based intelligent machine fault diagnosis and failure prognosis Intelligent Fault Diagnosis and Prognosis for Engineering Systems gives a complete presentation of basic essentials of fault diagnosis and failure prognosis, and takes a look at the cutting-edge discipline of intelligent fault diagnosis and failure prognosis technologies for condition-based maintenance. It thoroughly details the interdisciplinary methods required to understand the physics of failure mechanisms in materials, structures, and rotating equipment, and also presents strategies to detect faults or incipient failures and predict the remaining useful life of failing components. Case studies are used throughout the book to illustrate enabling technologies. Intelligent Fault Diagnosis and Prognosis for Engineering Systems offers material in a holistic and integrated approach that addresses the various interdisciplinary components of the field--from electrical, mechanical, industrial, and computer engineering to business management. This invaluably helpful book: * Includes state-of-the-art algorithms, methodologies, and contributions from leading experts, including cost-benefit analysis tools and performance assessment techniques * Covers theory and practice in a way that is rooted in industry research and experience * Presents the only systematic, holistic approach to a strongly interdisciplinary topic

Download or read book Prognostics and Health Management of Engineering Systems written by Nam-Ho Kim and published by Springer. This book was released on 2016-10-24 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the methods for predicting the future behavior of a system’s health and the remaining useful life to determine an appropriate maintenance schedule. The authors introduce the history, industrial applications, algorithms, and benefits and challenges of PHM (Prognostics and Health Management) to help readers understand this highly interdisciplinary engineering approach that incorporates sensing technologies, physics of failure, machine learning, modern statistics, and reliability engineering. It is ideal for beginners because it introduces various prognostics algorithms and explains their attributes, pros and cons in terms of model definition, model parameter estimation, and ability to handle noise and bias in data, allowing readers to select the appropriate methods for their fields of application.Among the many topics discussed in-depth are:• Prognostics tutorials using least-squares• Bayesian inference and parameter estimation• Physics-based prognostics algorithms including nonlinear least squares, Bayesian method, and particle filter• Data-driven prognostics algorithms including Gaussian process regression and neural network• Comparison of different prognostics algorithms divThe authors also present several applications of prognostics in practical engineering systems, including wear in a revolute joint, fatigue crack growth in a panel, prognostics using accelerated life test data, fatigue damage in bearings, and more. Prognostics tutorials with a Matlab code using simple examples are provided, along with a companion website that presents Matlab programs for different algorithms as well as measurement data. Each chapter contains a comprehensive set of exercise problems, some of which require Matlab programs, making this an ideal book for graduate students in mechanical, civil, aerospace, electrical, and industrial engineering and engineering mechanics, as well as researchers and maintenance engineers in the above fields.

Download or read book Prognostics written by Kai Goebel and published by Createspace Independent Publishing Platform. This book was released on 2017-04-03 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prognostics is the science of making predictions of engineering systems. It is part of a suite of techniques that determine whether a system is behaving within nominal operational performance and - if it does not - that determine what is wrong and how long it will take until the system no longer fulfills certain functional requirements. This book presents the latest developments and research findings on the topic of prognostics by the Prognostics Center of Excellence at NASA Ames Research Center. The book is intended to provide a practitioner with an understanding of the foundational concepts as well as practical tools to perform prognostics and health management on different types of engineering systems and in particular to predict remaining useful life.

Download or read book Fault Detection Diagnosis and Prognosis written by Fausto Pedro García Márquez and published by BoD – Books on Demand. This book was released on 2020-02-05 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main concepts, state of the art, advances, and case studies of fault detection, diagnosis, and prognosis. This topic is a critical variable in industry to reach and maintain competitiveness. Therefore, proper management of the corrective, predictive, and preventive politics in any industry is required. This book complements other subdisciplines such as economics, finance, marketing, decision and risk analysis, engineering, etc. The book presents real case studies in multiple disciplines. It considers the main topics using prognostic and subdiscipline techniques. It is essential to link these topics with the areas of finance, scheduling, resources, downtime, etc. to increase productivity, profitability, maintainability, reliability, safety, and availability, and reduce costs and downtime. Advances in mathematics, modeling, computational techniques, dynamic analysis, etc. are employed analytically. Computational techniques, dynamic analysis, probabilistic methods, and mathematical optimization techniques are expertly blended to support the analysis of prognostic problems with defined constraints and requirements. The book is intended for graduate students and professionals in industrial engineering, business administration, industrial organization, operations management, applied microeconomics, and the decisions sciences, either studying maintenance or needing to solve large, specific, and complex maintenance management problems as part of their jobs. The work will also be of interest to researches from academia.

Download or read book Innovation Engineering and Entrepreneurship written by José Machado and published by Springer. This book was released on 2018-06-02 with total page 1183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents endeavors to join synergies in order to create added value for society, using the latest scientific knowledge to boost technology transfer from academia to industry. It potentiates the foundations for the creation of knowledge- and entrepreneurial cooperation networks involving engineering, innovation, and entrepreneurship stakeholders. The Regional HELIX 2018 conference was organized at the University of Minho’s School of Engineering by the MEtRICs and Algoritmi Research Centers, and took place in Guimarães, Portugal, from June 27th to 29th, 2018. After a rigorous peer-review process, 160 were accepted for publication, covering a wide range of topics, including Control, Automation and Robotics; Mechatronics Design, Medical Devices and Wellbeing; Cyber-Physical Systems, IoT and Industry 4.0; Innovations in Industrial Context and Advanced Manufacturing; New Trends in Mechanical Systems Development; Advanced Materials and Innovative Applications; Waste to Energy and Sustainable Environment; Operational Research and Industrial Mathematics; Innovation and Collaborative Arrangements; Entrepreneurship and Internationalization; and Oriented Education for Innovation, Engineering and/or Entrepreneurship.

Download or read book Machine Tool Reliability written by Bhupesh K. Lad and published by John Wiley & Sons. This book was released on 2016-04-04 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the domain of reliability engineering in the context of machine tools. Failures of machine tools not only jeopardize users' ability to meet their due date commitments but also lead to poor quality of products, slower production, down time losses etc. Poor reliability and improper maintenance of a machine tool greatly increases the life cycle cost to the user. Thus, the application area of the present book, i.e. machine tools, will be equally appealing to machine tool designers, production engineers and maintenance managers. The book will serve as a consolidated volume on various dimensions of machine tool reliability and its implications from manufacturers and users point of view. From the manufacturers' point of view, it discusses various approaches for reliability and maintenance based design of machine tools. In specific, it discusses simultaneous selection of optimal reliability configuration and maintenance schedules, maintenance optimization under various maintenance scenarios and cost based FMEA. From the users' point of view, it explores the role of machine tool reliability in shop floor level decision- making. In specific, it shows how to model the interactions of machine tool reliability with production scheduling, maintenance scheduling and process quality control.

Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.

Download or read book Industrial Machinery Repair written by Ricky Smith and published by Elsevier. This book was released on 2003-08-18 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Machinery Repair provides a practical reference for practicing plant engineers, maintenance supervisors, physical plant supervisors and mechanical maintenance technicians. It focuses on the skills needed to select, install and maintain electro-mechanical equipment in a typical industrial plant or facility. The authors focuses on "Best Maintenance Repair Practices" necessary for maintenance personnel to keep equipment operating at peak reliability and companies functioning more profitably through reduced maintenance costs and increased productivity and capacity. A number of surveys conducted in industries throughout the United States have found that 70% of equipment failures are self-induced. If the principles and techniques in this book are followed, it will result in a serious reduction in "self induced failures". In the pocketbook format, this reference material can be directly used on the plant floor to aid in effectively performing day-to-day duties. Data is presented in a concise, easily understandable format to facilitate use in the adverse conditions associated with the plant floor. Each subject is reduced to it simplest terms so that it will be suitable for the broadest range of users. Since this book is not specific to any one type of industrial plant and is useful in any type of facility. - The new standard reference book for industrial and mechanical trades - Accessible pocketbook format facilitates on-the-job use - Suitable for all types of plant facilities

Download or read book Methods for Reliability Improvement and Risk Reduction written by Michael Todinov and published by John Wiley & Sons. This book was released on 2018-12-10 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability is one of the most important attributes for the products and processes of any company or organization. This important work provides a powerful framework of domain-independent reliability improvement and risk reducing methods which can greatly lower risk in any area of human activity. It reviews existing methods for risk reduction that can be classified as domain-independent and introduces the following new domain-independent reliability improvement and risk reduction methods: Separation Stochastic separation Introducing deliberate weaknesses Segmentation Self-reinforcement Inversion Reducing the rate of accumulation of damage Permutation Substitution Limiting the space and time exposure Comparative reliability models The domain-independent methods for reliability improvement and risk reduction do not depend on the availability of past failure data, domain-specific expertise or knowledge of the failure mechanisms underlying the failure modes. Through numerous examples and case studies, this invaluable guide shows that many of the new domain-independent methods improve reliability at no extra cost or at a low cost. Using the proven methods in this book, any company and organisation can greatly enhance the reliability of its products and operations.

Download or read book Intelligent Systems and Automation written by Lotfi Beji and published by American Institute of Physics. This book was released on 2009-03-09 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of CISA’09 is to present the latest research and application results emerging from new research and technological developments of complex systems and intelligent machines acting on known or unknown, virtual or real, environments in an autonomous way or in cooperation with humans. This field requires skills in automation and control, perception of the environment, human-computer interfaces, mechanics and design, simulation, etc. It also aims at encouraging scientific cooperation between North and South and promoting scientific exchanges through a durable event.