Download or read book Machine Tool In line and Robot Sensors and Controls written by Bartholomew O. Nnaji and published by SPIE-International Society for Optical Engineering. This book was released on 1995 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tools Production Systems 3 written by Christian Brecher and published by Springer Nature. This book was released on 2021-12-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants. The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Information Control Problems in Manufacturing Technology written by Y. Oshima and published by Elsevier. This book was released on 2014-05-18 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information-Control Problems in Manufacturing Technology contains the proceedings of an international symposium on "Information-Control Problems in Manufacturing Technology" held in Tokyo, Japan, on October 17-20, 1977 under the auspices of the International Federation of Automatic Control. The symposium provided a forum for discussing various engineering and technical problems in the automation of every step of the manufacturing process including design, machining, material handling, assembling, and inspection. Comprised of 46 chapters, this book begins by describing the modeling and simulation of a production system for small batch size metalworking production with high automation and high flexibility. The discussion then turns to the conceptual design of a multi-purpose automated Integrated Production Center for batch or piecewise production; research issues for automatic assembly; and practical application of diagnostic signature analysis to testing of rotating machines. Subsequent chapters focus on a profile pattern recognition system for machine parts; automatic inspection of defects on contact parts; the use of material-handling robots for programmable automation; and extra-cyclic passages of gray codes and their applications in numerical control design. This monograph will be of interest to engineers and technicians employed in the manufacturing industry.
Download or read book Robotics written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Investigations and Oversight and published by . This book was released on 1982 with total page 1314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Technology and Applications written by Rembold and published by CRC Press. This book was released on 2020-08-11 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces designers to hardware and software tools necessary for planning, laying out, and building advanced robot-based manufacturing cells surveying the available technology for creating innovative machines suitable to individual needs. Considers assembly system simulation, task-oriented programm
Download or read book Computer Science Handbook written by Allen B. Tucker and published by CRC Press. This book was released on 2004-06-28 with total page 2742 pages. Available in PDF, EPUB and Kindle. Book excerpt: When you think about how far and fast computer science has progressed in recent years, it's not hard to conclude that a seven-year old handbook may fall a little short of the kind of reference today's computer scientists, software engineers, and IT professionals need. With a broadened scope, more emphasis on applied computing, and more than 70 chap
Download or read book Robotics and Artificial Intelligence written by Michael Brady and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Lester A. Gerhardt Professor and Chairman Electrical, Computer, and Systems Engineering Rensselaer Polytechnic Institute Troy, New York 12180 This book is a collection of papers on the subject of Robotics and Artificial Intelligence. Most of the papers contained herein were presented as part of the program of the NATO Advanced Study Institute held in June 1983 at Castel vecchio Pascoli, Italy on the same subject. Attendance at this two week Institute was by invitation only, drawing people internationally representing industry, government and the academic community worldwide. Many of the people in attendance, as well as those presenting papers, are recognized leaders in the field. In addition to the formal paper presentations, there were several informal work shops. These included a workshop on sensing, a workshop on educational methodology in the subject area, as examples. This book is an outgrowth and direct result of that Institute and includes the papers presented as well as a few others which were stimulated by that meeting. A special note is the paper entitled "State-of-the-Art and Predictions for Artificial Intelligence and Robotics" by Dr. R. Nagel which appears in the Introduction and Overview chapter of this book. This paper was originally developed as part of a study for the United States Army performed by the National Research Council of the National Academy of Science and published as part of a report entitled "Applications of Robotics and Artificial Intelligence to Reduce Risk and Improve Effectiveness" by National Academy Press in 1983.
Download or read book Dimensions written by and published by . This book was released on 1974 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Terminological Dictionary of Automatic Control Systems and Robotics written by Rihard Karba and published by Springer Nature. This book was released on 2024-01-02 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains terms from the fields of automatic control, which includes mathematical modelling, simulation of dynamic systems, automation technology with its corresponding elements, and robotics. It also includes signal processing, information technologies and production technologies. The terminological dictionary is primarily aimed at experts and students who deal with control technology and dynamic systems in both technical and non-technical domains. To be able to use the dictionary, at least basic knowledge in this field is required. In the dictionary users will find concise terminological definitions. A concept may be designated by different terms; therefore, cross-references are used. The aim of the dictionary is to collect and unify – at least to an achievable extent – the terminology in the field of automatic control, dynamic systems and robotics.
Download or read book An Architecture for Robot Hierarchical Control System written by Anthony J. Barbera and published by . This book was released on 1977 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Architecture for a Robot Hierarchical Control System written by Anthony J. Barbera and published by . This book was released on 1977 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book From batch size 1 to serial production Adaptive robots for scalable and flexible production systems written by Mohamad Bdiwi and published by Frontiers Media SA. This book was released on 2023-05-24 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Van Nostrand s Scientific Encyclopedia written by Douglas M. Considine and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 3529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in science and engineering have occurred at a surprisingly rapid pace since the release of the seventh edition of this encyclopedia. Large portions of the reference have required comprehensive rewriting and new illustrations. Scores of new topics have been included to create this thoroughly updated eighth edition. The appearance of this new edition in 1994 marks the continuation of a tradition commenced well over a half-century ago in 1938 Van Nostrand's Scientific Encyclopedia, First Edition, was published and welcomed by educators worldwide at a time when what we know today as modern science was just getting underway. The early encyclopedia was well received by students and educators alike during a critical time span when science became established as a major factor in shaping the progress and economy of individual nations and at the global level. A vital need existed for a permanent science reference that could be updated periodically and made conveniently available to audiences that numbered in the millions. The pioneering VNSE met these criteria and continues today as a reliable technical information source for making private and public decisions that present a backdrop of technical alternatives.
Download or read book Computer Aided Design and Manufacturing written by U. Rembold and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing contributes to over 60 % of the gross national product of the highly industrialized nations of Europe. The advances in mechanization and automation in manufacturing of international competitors are seriously challenging the market position of the European countries in different areas. Thus it becomes necessary to increase significantly the productivity of European industry. This has prompted many governments to support the development of new automation resources. Good engineers are also needed to develop the required automation tools and to apply these to manufacturing. It is the purpose ofthis book to discuss new research results in manufacturing with engineers who face the challenge of building tomor row's factories. Early automation efforts were centered around mechanical gear-and-cam technology and hardwired electrical control circuits. Because of the decreasing life cycle of most new products and the enormous model diversification, factories cannot be automated efficiently any more by these conventional technologies. With the digital computer, its fast calculation speed and large memory capacity, a new tool was created which can substantially improve the productivity of manufactur ing processes. The computer can directly control production and quality assurance functions and adapt itself quickly to changing customer orders and new products.
Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.
Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.
Download or read book Analysis Design and Evaluation of Man Machine Systems 1988 written by J. Ranta and published by Elsevier. This book was released on 2014-06-28 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a state-of-the-art review of the development and future use of man-machine systems in all aspects of business and industry. The papers cover such topics as human-computer interaction, system design, and the impact of automation in general, and also by the use of case studies describe a wide range of applications in such areas as office automation, transportation, power plants, machinery and manufacturing processes and defence systems. Contains 73 papers.
