Download or read book Advances in Machine Tool Design and Research written by Stephen Albert Tobias and published by . This book was released on 1968 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tool Design and Research written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tools written by Ľubomír Šooš and published by BoD – Books on Demand. This book was released on 2020-10 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful producers of machine tools today must offer customers highly efficient and accurate machines. This can only be achieved with the help of modern software in research, construction, production and quality control. Trends in development are oriented towards modular construction machines. The application of modern tools and the progressive construction of headstock has increased cutting speeds, thus significantly increasing the machine's productivity. The first section of the book is focused on trends in the development of machines. A second very significant machine parameter is accuracy. The rigidity of the machine is a necessary condition for achieving its required accuracy. The second part of the book is dedicated to the effect of the individual constructional nodes on stability, the optimization of system rigidity, and the measuring of the accuracy of the machining tools. The aim of the third and final section of the book is to point out the widest possibilities for the application of machine tools in industry. An example is presented of the application of machining tools in the orthoses manufacture.
Download or read book Advances in Machine Tool Design and Research written by and published by . This book was released on 1963 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Tool Design and Research written by International Machine Tool Design and Research Conference and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Tool Design and Research written by S. A. Tobias and published by . This book was released on 1965 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Tool Design and Research 1967 written by S.A. Tobias and published by . This book was released on 1968 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Tool Design written by Nicholas Lisitsyn and published by . This book was released on 2000-04-01 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fundamental four-volume work was translated from the considerably revised second edition. It should be of great value to engineers engaged in the design, manufacture and maintenance of machine tool equipment. It can also be used to advantage by the students of engineering institutes majoring in Process Engineering, Metal-Cutting Machine Tools or Cutting Tool Design.The first volume deals with the basic machine tools and special machine tools used in cutting tool production. The classification, type and size range, and designation of machine tools, employed in Soviet practice, are given in detail, together with the types of motion found in machine tools. Metal-cutting lathes, turret lathes, vertical boring machines, automatic and semiautomatic lathes, milling machines and many other types of machine tools are described. Special attention has been given to machine tools designed for the production of cutting tools. These include general and single-purpose semiautomatic precision thread-grinding machines, automatic and semiautomatic tracer-controlled lathes with hydraulic controls, jig boring machines and specialized machine tools, as well as automatic transfer machines for cutting tool production.Volume two contains Parts Three and Four. Part Three deals with the kinematics of machine tools. This branch of machine tool design has been strictly systematized by the author and is set forth with exceptional clarity. The kinematic structures of a great many different types of machine tools, including the most complex gear-cutting machines, are analyzed by methods developed in the text which take into consideration the interrelation between the workpiece to be produced in the given machine tool. Part Four takes up hydraulic drives of machine tools. It contains all the theoretical and practical data required in the application of fluid power and control systems to machine tools.Volume Three contains Part Five and this deals with machine tool design proper. It is a comprehensive scientific treatment of the subject and is a revised and complemented version of a previous Russian edition which has become a reliable reference book for all Soviet machine tool engineers and has been translated into French. Such questions as performance criteria, basic design data, principal specifications and the development of the kinematic scheme of a new machine tool are dealt with in great detail. Design recommendations are given as well as the necessary calculation data for the basic elements of machine tools - speed and feed gearboxes, stepless drives, rapid traverse mechanisms, spindles and spindle bearings, mechanisms for rectilinear motion, small displacement and periodic motion, reversing devices, beds columns, tables and other housing-type components, slideways and antifriction ways.The fourth and final volume covers Automatic Machine Tools and Transfer Machines, and Machine Tool Testing and Research, Parts Six and Seven of the complete work. Part Six deals with the fundamental principles of machine tool automation, the various systems of numerical programme control that have found extensive application in modern machine tool design in the USSR and other countries. Much space has been given to automatic transfer machines, including in-line, rotary, and other types, their layout, features, design procedures, structure, and output.Current methods of testing and investigating the geometrical, kinematic, dynamic, and operational characteristics of machine tools are considered in Part Seven. Methods of testing the quality characteristics, of determining the corresponding criteria (indices), and of using contemporary apparatus for this purpose are dealt with. --This text refers to the Paperback edition.
Download or read book Advances in Machine Tool Design and Research 1965 written by Manchester College of Science & Technology and published by . This book was released on 1966 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Tool Design and Research 1969 written by and published by . This book was released on 1970 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Tool Design and Research 1969 written by S. A. Tobias and published by Elsevier. This book was released on 2015-12-04 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Machine Tool Design and Research 1969 focuses on the processes, methodologies, and techniques in the design of machine tools. The book contains the proceedings of the 10th International M.T.D.R. Conference held at the University of Manchester in September 1969. The selection first discusses examples and problems in the implementation of modern design features on large machine tools and development of numerically controlled conventional turning machines. The book reviews the theory and practice of fluid dampers in machine tools, including eccentricity of cylindrical film dampers, border effect, and vapor and gas pressure. The text also discusses tool life vibrations of grinding wheels as a function of vibration amplitude; thermal deformations of gear-cutting machines; thermal behavior of machine tools; and the effects of thermal deformation on the cylindrical accuracy in grinding process. The book also takes a look at the trends in manufacturing systems concepts and technical criteria to be used when purchasing machine tools. The selection is a dependable reference for readers interested in machine tool design.
Download or read book Proceedings of the Fifteenth International Machine Tool Design and Research Conference written by S a Tobias and published by Palgrave. This book was released on 2013-12-31 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machine Tool Design and Research 1967 written by S. A. Tobias and published by Elsevier. This book was released on 2016-04-19 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Machine Tool Design and Research 1967, Part I covers the proceedings of the 8th International M.T.D.R. conference (incorporating the 2nd international CIRP production engineering research conference) held in the University of Manchester, Institute of Science and Technology on September 1967. The book covers the accuracy of automatically controlled machine tools; the influence of the rigidity of the machine-workpiece-tool system on the roughness of the machined surface; and the analysis of machine tool structure by computing techniques. The text also discusses sensors of tool life for optimization of machining; pre-set tooling and its application; and system 24, a new concept of manufacture. The design of hydrostatic journal bearings; the computer approach for storage of machinability data and calculation of machining costs and production rates; and a comparison of different measuring and indicating methods for the determination of pitch errors of large precision gears are also encompassed. The book further presents the calibration of tool/work thermocouples, as well as the effect of tool flank wear on the temperatures generated during metal cutting.
Download or read book Machine Tools Production Systems 2 written by Christian Brecher and published by Springer Nature. This book was released on 2021-11-08 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this volume provides the user with assistance in the selection and design of important machine and frame components. It also provides help with machine design, calculation and optimization of these components in terms of their static, dynamic and thermoelastic behavior. This includes machine installation, hydraulic systems, transmissions, as well as industrial design and guidelines for machine design. The second part of this volume deals with the metrological investigation and assessment of the entire machine tool or its components with respect to the properties discussed in the first part of this volume. Following an overview of the basic principles of measurement and measuring devices, the procedure for measuring them is described. Acceptance of the machine using test workpieces and the interaction between the machine and the machining process are discussed in detail. The German Machine Tools and Manufacturing Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with color technical illustrations throughout. This first English edition is a translation of the German ninth edition.
Download or read book Proceedings of the Machine Tool Design and Research International Conference 12th written by Machine Tool and Design Research International Confe and published by Halsted Press. This book was released on 1973-02-01 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Twenty eighth International MATADOR Conference written by B. J. Davies and published by Scholium International. This book was released on 1990 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Fourteenth International Machine Tool Design and Research Conference written by S. a. Tobias and published by Palgrave. This book was released on 2013-12-31 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
