Download or read book Analysis and Design of Energy Geostructures written by Lyesse Laloui and published by Academic Press. This book was released on 2019-10-19 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Design of Energy Geostructures gathers in a unified framework the theoretical and experimental competence available on energy geostructures: innovative multifunctional earth-contact structures that can provide renewable energy supply and structural support to any built environment. The book covers the broad, interdisciplinary and integrated knowledge required to address the analysis and design of energy geostructures from energy, geotechnical and structural perspectives. This knowledge includes (Part A) an introduction to the technology; (Part B) the fundamentals of heat and mass transfers as well as of the mechanics of geomaterials and structures required to address the unprecedented behavior of energy geostructures; (Part C) the experimental evidence characterizing the considered geostructures; (Part D) various analytical and numerical modeling approaches to analyze the response of energy geostructures; and (Part E) the performance-based design and detailing essentials of energy geostructures. - Proposes the theoretical and practical application essentials required to address the analysis and design of energy geostructures from energy, geotechnical and structural perspectives - Presents a substantial amount of resolved exercises on key aspects governing the behavior and performance of energy geostructures to be considered in analysis and design - Summarizes and discusses the most recent scientific and technical knowledge about energy geostructures, including energy piles, energy tunnels and energy walls

Download or read book Geology written by Aurèle Parriaux and published by CRC Press. This book was released on 2018-10-31 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geology – Basics for Engineers (second edition) presents the physical and chemical characteristics of the Earth, the nature and the properties of rocks and unconsolidated deposits/sediments, the action of water, how the Earth is transformed by various phenomena at different scales of time and space. The book shows the engineer how to take geological conditions into account in their projects, and how to exploit a wide range of natural resources in an intelligent way, reduce geological hazards, and manage subsurface pollution. This second edition has been fully revised and updated. Through a problem-based learning approach, this instructional text imparts knowledge and practical experience to engineering students (undergraduate and graduate level), as well as to experts in the fields of civil engineering, environmental engineering, earth sciences, architecture, land and urban planning. Free digital supplements to the book, found on the book page, contain solutions to the problems and animations that show additional facets of the living Earth. The original French edition of the book (2007) won the prestigious Roberval Prize, an international contest organized by the University of Technology of Compiegne in collaboration with the General Council of Oise, France. Geology, Basics for Engineers was selected out of a total of 110 candidates. The jury praised the book as a "very well conceived teaching textbook" and underscored its highly didactic nature, as well as the excellent quality of its illustrations. Features: Offers an exhaustive outline of the methods and techniques used in geology, with a study of the nature and properties of the principal soils and rocks Helps students understand how geological conditions should be taken into account by the engineer by taking a problem-solving approach Contains extensive figures and examples, solutions to probems, and illustrative animations Presents a highly didactic and synthetic work intended for engineering students as well as experts in civil engineering, environmental engineering, the earth sciences, and architecture

Download or read book Energy Geostructures written by Lyesse Laloui and published by John Wiley & Sons. This book was released on 2013-09-03 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy geostructures are a tremendous innovation in the field of foundation engineering and are spreading rapidly throughout the world. They allow the procurement of a renewable and clean source of energy which can be used for heating and cooling buildings. This technology couples the structural role of geostructures with the energy supply, using the principle of shallow geothermal energy. This book provides a sound basis in the challenging area of energy geostructures. The objective of this book is to supply the reader with an exhaustive overview on the most up-to-date and available knowledge of these structures. It details the procedures that are currently being applied in the regions where geostructures are being implemented. The book is divided into three parts, each of which is divided into chapters, and is written by the brightest engineers and researchers in the field. After an introduction to the technology as well as to the main effects induced by temperature variation on the geostructures, Part 1 is devoted to the physical modeling of energy geostructures, including in situ investigations, centrifuge testing and small-scale experiments. The second part includes numerical simulation results of energy piles, tunnels and bridge foundations, while also considering the implementation of such structures in different climatic areas. The final part concerns practical engineering aspects, from the delivery of energy geostructures through the development of design tools for their geotechnical dimensioning. The book concludes with a real case study. Contents Part 1. Physical Modeling of Energy Piles at Different Scales 1. Soil Response under Thermomechanical Conditions Imposed by Energy Geostructures, Alice Di Donna and Lyesse Laloui. 2. Full-scale In Situ Testing of Energy Piles, Thomas Mimouni and Lyesse Laloui. 3. Observed Response of Energy Geostructures, Peter Bourne-Webb. 4. Behavior of Heat-Exchanger Piles from Physical Modeling, Anh Minh Tang, Jean-Michel Pereira, Ghazi Hassen and Neda Yavari. 5. Centrifuge Modeling of Energy Foundations, John S. McCartney. Part 2. Numerical Modeling of Energy Geostructures 6. Alternative Uses of Heat-Exchanger Geostructures, Fabrice Dupray, Thomas Mimouni and Lyesse Laloui. 7. Numerical Analysis of the Bearing Capacity of Thermoactive Piles Under Cyclic Axial Loading, Maria E. Suryatriyastuti, Hussein Mroueh , Sébastien Burlon and Julien Habert. 8. Energy Geostructures in Unsaturated Soils, John S. McCartney, Charles J.R. Coccia , Nahed Alsherif and Melissa A. Stewart. 9. Energy Geostructures in Cooling-Dominated Climates, Ghassan Anis Akrouch, Marcelo Sanchez and Jean-Louis Briaud. 10. Impact of Transient Heat Diffusion of a Thermoactive Pile on the Surrounding Soil, Maria E. Suryatriyastuti, Hussein Mroueh and Sébastien Burlon. 11. Ground-Source Bridge Deck De-icing Systems Using Energy Foundations, C. Guney Olgun and G. Allen Bowers. Part 3. Engineering Practice 12. Delivery of Energy Geostructures, Peter Bourne-Webb with contributions from Tony Amis, Jean-Baptiste Bernard, Wolf Friedemann, Nico Von Der Hude, Norbert Pralle, Veli Matti Uotinen and Bernhard Widerin. 13. Thermo-Pile: A Numerical Tool for the Design of Energy Piles, Thomas Mimouni and Lyesse Laloui. 14. A Case Study: The Dock Midfield of Zurich Airport, Daniel Pahud. About the Authors Lyesse Laloui is Chair Professor, Head of the Soil Mechanics, Geoengineering and CO2 storage Laboratory and Director of Civil Engineering at the Swiss Federal Institute of Technology (EPFL) in Lausanne, Switzerland. Alice Di Donna is a researcher at the Laboratory of Soil Mechanics at the Swiss Federal Institute of Technology (EPFL) in Lausanne, Switzerland.

Download or read book Renewable Energy Policy Convergence in the EU written by David Jacobs and published by Routledge. This book was released on 2016-03-23 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the coordination of renewable energy policies in the European Union using an innovative theoretical approach to explain national policy making. David Jacobs asks, why are national support instruments for electricity from renewable energy sources converging, even though the harmonisation of these frameworks at the European level has failed? Which causal mechanisms lead to cross-national policy similarities? And what are the implications for policy coordination in the EU? The author traces the evolution of feed-in tariffs - the most successful and most widely used support mechanism for renewable electricity - in Germany, Spain and France. He reveals increasing cross-national policy similarities in feed-in tariff design - despite the failure of harmonizing instruments at the European level. He explains these increasing policy similarities by applying policy convergence theory. Policy convergence can occur voluntarily, based on transnational communication, regulatory competition and technological innovations and these findings have important implications for European policy steering. The key to this book is the interrelation of an innovative theoretical concept (coordination of policies in the international arena via voluntary cooperation) with a very topical empirical research focus - the promotion of renewable energies in the EU. It will be essential reading for scholars and students of environmental policy, comparative politics and European studies.

Download or read book Handbook of Alternative Fuel Technologies Second Edition written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels—including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation—fossil fuel resources are limited and may soon be on the verge of depletion in the near future. Measuring the correlation between quality of life, energy consumption, and the efficient utilization of energy, the Handbook of Alternative Fuel Technologies, Second Edition thoroughly examines the science and technology of alternative fuels and their processing technologies. It focuses specifically on environmental, technoeconomic, and socioeconomic issues associated with the use of alternative energy sources, such as sustainability, applicable technologies, modes of utilization, and impacts on society. Written with research and development scientists and engineers in mind, the material in this handbook provides a detailed description and an assessment of available and feasible technologies, environmental health and safety issues, governmental regulations, and issues and agendas for R&D. It also includes alternative energy networks for production, distribution, and consumption. What’s New in This Edition: Contains several new chapters of emerging interest and updates various chapters throughout Includes coverage of coal gasification and liquefaction, hydrogen technology and safety, shale fuel by hydraulic fracturing, ethanol from lignocellulosics, biodiesel, algae fuels, and energy from waste products Covers statistics, current concerns, and future trends A single-volume complete reference, the Handbook of Alternative Fuel Technologies, Second Edition contains relevant information on chemistry, technology, and novel approaches, as well as scientific foundations for further enhancements and breakthroughs. In addition to its purposes as a handbook for practicing scientists and engineers, it can also be used as a textbook or as a reference book on fuel science and engineering, energy and environment, chemical process design, and energy and environmental policy.

Download or read book Illite written by Alain Meunier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph examines the mineralogy of illite, the most common clay mineral, as a unifying theme for understanding problems of the surface environment and environmental change. The volume begins with a careful analysis of the structure and transformation of illite. Using illite as the frame, the authors describe problems in soil chemistry, clay stability and clay kinetics in sedimentary rocks.

Download or read book Introduction to Clay Minerals written by Velde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Clay Minerals is designed to give a detailed, concise and clear introduction to clay mineralogy. Using the information presented here, one should be able to understand clays and their mineralogy, their uses and importance in modern life.

Download or read book Advances in Ground Source Heat Pump Systems written by Simon Rees and published by Woodhead Publishing. This book was released on 2016-05-13 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ground-Source Heat Pump Systems relates the latest information on source heat pumps (GSHPs), the types of heating and/or cooling systems that transfer heat from, or to, the ground, or, less commonly, a body of water. As one of the fastest growing renewable energy technologies, they are amongst the most energy efficient systems for space heating, cooling, and hot water production, with significant potential for a reduction in building carbon emissions. The book provides an authoritative overview of developments in closed loop GSHP systems, surface water, open loop systems, and related thermal energy storage systems, addressing the different technologies and component methods of analysis and optimization, among other subjects. Chapters on building integration and hybrid systems complete the volume. - Provides the geological aspects and building integration covered together in one convenient volume - Includes chapters on hybrid systems - Presents carefully selected chapters that cover areas in which there is significant ongoing research - Addresses geothermal heat pumps in both heating and cooling modes

Download or read book Energy Geotechnics written by Alessio Ferrari and published by Springer. This book was released on 2018-08-23 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected full papers presented at the International Symposium on Energy Geotechnics 2018 (SEG-2018), held on 25th – 28th September 2018, at the Swiss Federal Institute of Technology in Lausanne (EPFL). It covers a wide range of topics in energy geotechnics, including energy geostructures, energy geostorage, thermo-hydro-chemo-mechanical behaviour of geomaterials, unconventional resources, hydraulic stimulation, induced seismicity, CO2 geological storage, and nuclear waste disposal as well as topics such as tower and offshore foundations. The book is intended for postgraduate students, researchers and practitioners working on geomechanics and geotechnical engineering for energy-related applications.

Download or read book Transatlantic Environment and Energy Politics written by Miranda Alice Schreurs and published by Ashgate Publishing, Ltd.. This book was released on 2009 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a wide range of case studies that embrace climate change, product standards, chemical regulations, renewable energy policies, food safety and genetically-modified organisms, this fascinating volume examines areas of conflict and cooperation in the relationship between the European Union and North America.

Download or read book Metal Machining written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years.Of interest to all mechanical, manufacturing and materials engineersTheoretical and practical problems addressed

Download or read book Deep Foundations on Bored and Auger Piles BAP III written by W. Haegeman and published by CRC Press. This book was released on 2020-09-29 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents findings from the 3rd International Geotechnical Seminar, held in Ghent, Belgium. Topics include: American experiences with large diameter bored piles; case histories; static, dynamic and pile integrity testing; and installation parameters and capacity of screwed piles.

Download or read book Sustainable Geotechnics written by Slobodan B Mickovski and published by Mdpi AG. This book was released on 2021-08-30 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, modern Geotechnical Engineers, who in the past would have considered the phenomena occurring in the (primarily soil) environment, are faced with developments in environmental sciences that are becoming increasingly more detailed and sophisticated, with the natural phenomena and processes surrounding the civil engineering infrastructure being modeled, designed, monitored, and assessed in a more holistic way. This book brings together the state of the art in geotechnics with a focus on sustainable design, resilience, construction, and monitoring of the performance of geotechnical assets from ground investigations, through foundation and drainage design to soil stabilization and reinforcement. Engineers and scientists working in the fields of green infrastructure, nature-based solutions, sustainable drainage, eco-engineering, hydro-geology, landscape planning, plant science, environmental biology or bio-chemistry, earth sciences, GIS, and remote sensing are represented here by articles that show significant geotechnical components or applications. Case studies showcasing the application of the sustainable development principles (e.g., reuse, recycle, reduce; stakeholder engagement; public health; UN Global Sustainability Goals) in Geotechnics are also included in this book.

Download or read book Terra 2008 written by Leslie Rainer and published by Getty Publications. This book was released on 2011-06-14 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthen architecture constitutes one of the most diverse forms of cultural heritage and one of the most challenging to preserve. It dates from all periods and is found on all continents but is particularly prevalent in Africa, where it has been a building tradition for centuries. Sites range from ancestral cities in Mali to the palaces of Abomey in Benin, from monuments and mosques in Iran and Buddhist temples on the Silk Road to Spanish missions in California. This volume's sixty-four papers address such themes as earthen architecture in Mali, the conservation of living sites, local knowledge systems and intangible aspects, seismic and other natural forces, the conservation and management of archaeological sites, research advances, and training.

Download or read book Soil Mechanics and Foundations written by Marian Sewick and published by . This book was released on 2016-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of rock and soil as construction and load bearing material goes hand in hand with the background knowledge of the geological process of formation and the environmental effects on such formations. Soil is the combination of rock, mineral fragments, organic matter, water and air. It is mostly made up of grains of rock and humus. The type of soil depends on the mix of humus and on the size of the grains of the rock. Soils are the oldest and the most used building materials. Soil mechanics and foundations engineering covers that how to solve certain fundamental problems related to consolidation, shear strength, and design of shallow and deep foundations; and familiarizes students with relevant terms and soil tests so that they can work effectively with geotechnical engineering specialists. Soil Mechanics and Foundations emphasizes on the basic concepts and principles of soil mechanics and foundations in the context of basic mechanics, physics, and mathematics. Soil Mechanics and Foundation is reference tool for engineers, scientific researchers, and construction and design specialists with the up-to-date achievements in soil mechanics theory, experimental investigations, geotechnical and foundation engineering problems and innovative solutions, design and construction practice in regions with steady and exciting soil conditions.

Download or read book Thermal Energy Storage for Sustainable Energy Consumption written by Halime Ö. Paksoy and published by Springer Science & Business Media. This book was released on 2007-03-16 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Çukurova University, Turkey in collaboration with Ljubljana University, Slovenia and the International Energy Agency Implementing Agreement on Energy Conservation Through Energy Storage (IEA ECES IA) organized a NATO Advanced Study Institute on Thermal Energy Storage for Sustainable Energy Consumption – Fundamentals, Case Studies and Design (NATO ASI TESSEC), in Cesme, Izmir, Turkey in June, 2005. This book contains manuscripts based on the lectures included in the scientific programme of the NATO ASI TESSEC.

Download or read book Innovation in Global Health Governance written by Professor Andrew F Cooper and published by Ashgate Publishing, Ltd.. This book was released on 2013-03-28 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyzing twenty-first century innovations in global health governance, this volume addresses questions of pandemics, essential medicines and disease eradication through detailed case studies of critical and rapidly spreading infectious diseases such as HIV/AIDS and SARS and 'lifestyle' illnesses such as tobacco-related illnesses, all of which are at the centre of the current global health challenge. Given its contemporary focus and wide range of world leading experts, this study is highly suitable for courses on global governance generally and global public health specifically across political science, economics, law, medicine, nursing and related fields. Scholars, practitioners and clinicians seeking a context for their front line health care provision will find this volume invaluable.