Download or read book Manufacturing of Petroleum Products Petroleum Waxes Greases and Solid Lubricants Solid Fuels Gaseous Fuels Gasoline Diesel Fuel Oils Automotive Diesel and Aviation Fuels Lubricating Oils and Lubricating Greases written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-05-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum waxes are semi refined or fully refined products obtained during the processing of crude oil. According to their structure they are divided into macrocrystalline waxes (paraffin waxes) and microcrystalline waxes (ceresine, petrolatum, others). Grease, thick, oily lubricant consisting of inedible lard, the rendered fat of waste animal parts, or a petroleum-derived or synthetic oil containing a thickening agent. Greases of mineral or synthetic origin consist of a thickening agent dispersed in a liquid lubricant such as petroleum oil or a synthetic fluid. Diesel fuel, also called diesel oil, combustible liquid used as fuel for diesel engines, ordinarily obtained from fractions of crude oil that are less volatile than the fractions used in gasoline. Lubricating oil, sometimes simply called lubricant/lube, is a class of oils used to reduce the friction, heat, and wear between mechanical components that are in contact with each other. Lubricating oil is used in motorized vehicles, where it is known specifically as motor oil and transmission fluid. The global wax market was valued at around USD 9 billion in 2017 and is expected to reach approximately USD 12 billion in 2024, growing at a CAGR of slightly above 3.5% between 2018 and 2024.The India lubricant market is expected to register a CAGR of 4.64%, during the forecast period, 2018-2023. The major factors driving the growth of the market are the increasing vehicular production along with the growing industrial sector. The global market for lubricants is expected to reach USD 70.32 billion by 2020. The global grease market is expected to grow at a CAGR of 2.13% during the forecast period, 2018 - 2023.Aviation fuel market size will grow by over USD 34 billion during 2018-2022 Some of the fundamentals of the book are composition of the petroleum waxes, solvent extraction, greases and solid lubricants, solid fuels, other significant tests or properties, gaseous fuels, properties of waxes, gasoline, diesel fuel oils, automotive, diesel and aviation fuels, special processes for motor-fuel blending components, crude distillation, lubricating oils, lubricating greases, nature of lubricating oils, photographs of machinery with suppliers contact details A total guide to manufacturing and entrepreneurial success in one of todayÕs most lucrative petroleum industry. This book is one-stop guide to one of the fastest growing sectors of the petroleum industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of petroleum products. It serves up a feast of how-to information, from concept to purchasing equipment.
Download or read book Lubricating Oils Greases and Petroleum Products Manufacturing Handbook written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-01-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating oils are specially formulated oils that reduce friction between moving parts and help maintain mechanical parts. Lubricating oil is a thick fatty oil used to make the parts of a machine move smoothly. The lubricants market is growing due to the growing automotive industry, increased consumer awareness and government regulations regarding lubricants. Lubricants are used in vehicles to reduce friction, which leads to a longer lifespan and reduced wear and tear on the vehicles. The growth of lubricants usage in the automotive industry is mainly due to an increasing demand for heavy duty vehicles and light passenger vehicles, and an increase in the average lifespan of the vehicles. As saving conventional resources and cutting emissions and energy have become central environmental matters, the lubricants are progressively attracting more consumer awareness. Greases are made by using oil (typically mineral oil) and mixing it with thickeners (such as lithium-based soaps). They may also contain additional lubricating particles, such as graphite, molybdenum disulfide, or polytetrafluoroethylene (PTFE, aka Teflon). White grease is made from inedible hog fat and has a low content of free fatty acids. Yellow grease is made from darker parts of the hog and may include parts used to make white grease. Brown grease contains beef and mutton fats as well as hog fats. Synthetic grease may consist of synthetic oils containing standard soaps or may be a mixture of synthetic thickeners, or bases, in petroleum oils. Silicones are greases in which both the base and the oil are synthetic. Asia-Pacific represents the largest and the fastest growing market, with volume sales projected to grow at a CAGR of 5% over the analysis period. Automotive lubricants represents the largest product market, with engine oils generating a major chunk of the revenues. The market for industrial lubricants is supported by the huge demand for industrial engine oils and growing consumption of process oils. The major content of the book are Food and Technical Grade White Oils and Highly Refined Paraffins, Base Oils from Petroleum, Formulation of Automotive Lubricants, Lubricating Grease, Aviation Lubricants, Formulation and Structure of Lubricating Greases, Marine Lubricants, Industrial Lubricants, Refining of Petroleum, Lubricating Oils, Greases and Solid Lubricants, Refinery Products, Crude Distillation and Photographs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Lubricants Oils and Greases written by Iltyd I. Redwood and published by . This book was released on 1898 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubrication Fundamentals Revised and Expanded written by Don M. Pirro and published by CRC Press. This book was released on 2017-07-31 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Careful selection of the right lubricant(s) is required to keep a machine running smoothly. Lubrication Fundamentals, Third Edition, Revised and Expanded describes the need and design for the many specialized oils and greases used to lubricate machine elements and builds on the tribology and lubrication basics discussed in previous editions. Utilizing knowledge from leading experts in the field, the third edition covers new lubrication requirements, crude oil composition and selection, base stock manufacture, lubricant formulation and evaluation, machinery and lubrication fundamentals, and environmental stewardship. The book combines lubrication theory with practical knowledge, and provides many useful illustrations to highlight key industrial, commercial, marine, aviation, and automotive lubricant applications and concepts. All previous edition chapters have been updated to include new technologies, applications, and specifications that have been introduced in the past 15 years. What’s New in the Third Edition: Adds three new chapters on the growing renewable energy application of wind turbines, the impact of lubricants on energy efficiency, and best practice guidelines on establishing an in-service lubricant analysis program Updates API, SAE, and ACEA engine oil specifications, descriptions of new engine oil tests, impact of engine and fuel technology trends on engine oil Includes the latest environmental lubricant tests, definitions, and labelling programs Compiles expert information from ExxonMobil publications and the foremost international equipment builders and industry associations Covers key influences impacting lubricant formulations and technology Offers data on global energy demand and interesting statistics such as the worldwide population of nuclear reactors, wind turbines, and output of hydraulic turbines Presents new sections on the history of synthetic lubricants and hazardous chemical labeling for lubricants Whether used as a training guide for industry novices, a textbook for students to understand lubrication principles, or a technical reference for experienced lubrication and tribology professionals, Lubrication Fundamentals, Third Edition, Revised and Expanded is a "must read" for maintenance professionals, lubricant formulators and marketers, chemists, and lubrication, surface, chemical, mechanical, and automotive engineers.
Download or read book Modern Technology of Petroleum Greases Lubricants Petro Chemicals Lubricating Oils Cutting Oil Additives Refining Bitumen Waxes with Process and Formulations 3rd Revised Edition written by NIIR Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-04-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricants, greases and petrochemicals are most versatile on the Industrial Plateau now a day. The significance of Lubricants, Greases and specialty products in the day to day functioning of nearly every machine part, instrument, appliance & device cannot be over emphasized lubricants reduce friction & wear between rubbing parts, thereby enhancing their life. A lubricant is a substance introduced to reduce friction between moving surfaces. It may also have the function of transporting foreign particles. The property of reducing friction is known as lubricity. The broad types of lubricating oils are as under; crankcase oils, gear oils, metal working oils, metal drawing oils, spindle and other textile oils, steam turbine oils. Synthetic lubricants have a higher viscosity index, but are less stable to oxidation. They are suitable for high temperature applications. In the modern industrial year, greases have been increasingly employed to cope with a variety of difficult lubrication problems, particularly those where the liquid lubricant is not feasible. Greases are essentially solid or semi solid lubricants consisting of gelling or thickening agent in a liquid lubricant. Greases and lubricants are one of the important products derived from crude petroleum. Petroleum is formed by hydrocarbons (a hydrocarbon is a compound made up of carbon and hydrogen) with the addition of certain other substances, primarily sulphur. Petroleum in its natural form when first collected is usually named crude oil, and can be clear, green or black and may be either thin like gasoline or thick like tar. The principal product of petroleum refining are motor gasoline, aviation gasoline, kerosene, jet fuels, diesel fuels, lubricating oils and fuel oils. Considerable quantities of petroleum wax, bitumen, liquid petroleum gases (LPG), industrial naphtha and coke are also produced. Petrochemicals are chemicals made from petroleum (crude oil) and natural gas. Petroleum and natural gas are made up of hydrocarbon molecules, which are comprised of one or more carbon atoms, to which hydrogen atoms are attached. The Indian lubricants industry claims to be the sixth largest in the world. The petrochemical industry in India has been one of the fastest growing industries in the country. This industry also has immense importance in the growth of economy of the country and the growth and development of manufacturing industry as well. Some of the fundamentals of the book are types of lubricating oils, crankcase oils, gear oils, metal working oils, metal drawing oils, spindle and other textile oils, steam turbine oils, synthetic lubricants, formulations and com pounding of lubricants, additives for straight mineral oil gear lubricants, raw materials for lubricants, equipments for lubricants manufacture, reclamation of used lubricating oil, nature of contaminants in used lubricating oil, gravity methods of purification, metal forming and deforming lubricant, cutting oils, heat treatment oils, greases, sodium soap greases, lithium soap greases, aluminium soap greases, mixed soap greases, complex soap greases etc. The objective of this book is to furnish comprehensive information about nearly all prominent types of lubricants, greases and petrochemicals. This book covers formulae, processes of various petroleum items. This book is an invaluable resource for entrepreneurs, existing units, professionals, institutions etc.
Download or read book Lubrication and Lubricant Selection written by A. R. Lansdown and published by American Society of Mechanical Engineers. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides guidance to lubrication practice in industry, with the emphasis on practical application. He covers the appropriate selection of lubricants for a wide range of uses and the factors that determine their suitability. Topics include: basic principles of lubrication; selection of lubricating oils; oil supply and systems, oil changing, and conservation; greases and anti-seizes; dry bearings, solid lubrication, and gas bearings; sealing; lubricant testing, specification, monitoring, handling and storage; health and safety.
Download or read book Lubrication written by A. R. Lansdown and published by Elsevier. This book was released on 2013-10-22 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubrication: A Practical Guide to Lubricant Selection provides a guide to modern lubrication practice in industry, with emphasis on practical application, selection of lubricants, and significant factors that determine suitability of a lubricant for a specific application. Organized into 13 chapters, this book begins with a brief theoretical opening chapter on the basic principles of lubrication. A chapter then explains the choice of lubricant type, indicating how to decide whether to use oil, grease, dry lubricant, or gas lubrication. Subsequent chapters deal with detailed selection of lubricating oils, oil systems, oil changing, greases, dry lubricants, gas lubrication, sealing, testing, monitoring, and handling of lubricants. The final chapter describes the main hazards associated with lubricants and some of the techniques for controlling those hazards. This book will be of value to technical staffs who use lubricants in their work; to students of mechanical, production, or maintenance engineering; and to others, such as buyers and storekeepers concerned with lubricants.
Download or read book Mitigating Environmental Impact of Petroleum Lubricants written by Ignatio Madanhire and published by Springer. This book was released on 2016-06-09 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores effective environmental impact mitigation for petroleum-based lubricants to reduce their negative persistence during usage and upon end-of-life disposal. The book reviews the basic tribology of lubricants as well as initiatives that may enhance the environmental and economic effectiveness of lubricating oils from the composition design perspective across industries. Considering the blending, application, and disposal of petroleum lubricants in a holistic manner, the book presents and extends current best practices that minimize or eliminate adverse environmental impact throughout the product’s life cycle. The book reviews methods including: raw material substitution, minimizing oil losses during and after manufacturing, raw material and energy consumption reduction, and environmentally friendly applications of oil disposal as ways forward for cleaner and more effective production. This book provides readers with strategies for incorporating cleaner production practices into their operations – a benefit to both environmental legal compliance and business competitiveness – all the while preserving the environment for sustainable development. The book is therefore of interest to both manufacturers and consumers in the lubricants industry.
Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Chemistry and Technology of Lubricants" describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Edition was published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. "Chemistry and Technology of Lubricants" is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.
Download or read book Biobased Lubricants and Greases written by Lou Honary and published by John Wiley and Sons. This book was released on 2011-03-29 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the rise in petroleum prices as well as increasing environmental concerns, there is a need to develop biochemicals and bioproducts that offer realistic alternatives to their traditional counterparts; this book will address the lack of a centralized resource of information on lubricants and greases from renewable sources, and will be useful to a wide audience in industry and academia. It is based on 20 years of research and development at the UNI-NABL Center, and discusses the various types of vegetable oils available, comparing their characteristics, properties and benefits against those of typical petroleum oils as well as discussing common evaluation tests and giving examples and case studies of successful applications of biobased lubricants and greases. Whilst scientific and engineering research data is included, the book is written in an accessible manner and is illustrated throughout. Focuses on an industrial application of lubrication technology undergoing current explosive growth in the global market. Includes a detailed review of the material benefits of plant-based lubricants that include a better viscosity index and lubricity even at extreme temperatures, lower flammability due to higher flash points and lower pour points. Covers the basic chemistry of vegetable oils as well as their profiles for use in lubricants and greases and environmental benefits. Includes examples and case studies of where vegetable-based lubricants have been successfully employed in industry applications.
Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hand Book of Lubricants Greases and Petrochemicals Technology written by and published by Engineers India Research In. This book was released on 2009* with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Hand Book of Lubricants, Greases and Petrochemicals Technology covers almost all the basic and advanced details to setup own Product Introduc tion, Lubricating Base Stocks, Oxidative Degradation and Stabilisation of Mineral Oil Based Lubricants, Lubricating Oils Classification, Synthetic Fluids, Speciality Oils, Miscellaneous Additives and Vegetable Oils, Various Formulations of Lubricants and Grease, Asphalt Technology, Speciality Products, Treatment of Lubes, The Formulation of Automotive Lubricant, Industrial Lubricants, Lubricating Greases, Manufacture of Lubricating Greases, Lubricant and Their Environmental Impact, Jatropha (Bio Diesel) Cultivation & Extraction, Crude Oil Bleaching for Petroleum Jelly, Soluble Cutting Oil, Emulsifiers for Cutting Oils, Peroleum Jelly, Toluene and SBP from Crude Naphtha, White Oil from Ker osene Oil, Transformer Oil, Biodiesel Project Report. The book has been written for the benefit and to prove an asset and a handy reference guide in the hands of new entrepreneurs & well established industrialists
Download or read book Which Oil written by Richard Michell and published by Veloce Publishing Ltd. This book was released on 2011-10-15 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a new edition for November 2013 If you own a classic car, you face the problem of choosing the appropriate modern lubricants to use in its engine, gearbox, final drive and chassis. The original owner’s handbook, if you have one, is probably of limited use as the lubricants it lists are probably no longer available. Even if you have some good information, you still have problems: are modern oils suitable? If yes, which ones? (Even within a single brand there may be five or six different oils sold for apparently the same purpose.) If no, then why not? What characteristics are unsuitable, and where do you turn to obtain an appropriate oil? This book gives all owners the information that will allow them to understand the lubrication needs of their cars, and to relate those needs to modern lubricants. You will be able to make correct and safe choices, or to seek out appropriate specialised lubricants if necessary, using step-by-step instructions. Answers are also given to many of the most commonly asked questions about suitable oils for classic cars.
Download or read book Developments in Lubricant Technology written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: DEVELOPMENTS IN LUBRICANT TECHNOLOGY Examines all stages of Lubricant formulations, production and applications Developments in Lubricant Technology describes the basics of Lubricant formulations and their application in variety of equipment and engines. Divided into twenty chapters, this book provides an introduction to lubricant technology for users, young scientists and engineers desirous of understanding this subject. The book covers all major classes of lubricants including base oils (mineral, chemically modified and synthetic), followed by the description of chemical- additives and their evaluation. A brief chapter on the friction-wear and lubrication has been provided to understand the behaviour of lubricants in equipment. Major industrial oils such as turbine, hydraulic, gear, compressor and metal working fluids have been described. Automotive engine, gear and transmission oils for passenger cars, commercial vehicles, rail-road, marine, natural gas engines and 2T, 4T small engines have been discussed at length with latest specifications and global trends. Various synthetic oils and environmentally friendly products have also been described in the relevant chapters to understand the critical applications of such products in modern equipment and engines. Finally lubricants blending technology, quality control, their storage, handling, re-refining and condition monitoring in equipment have been discussed along with the typical lubricant tests and their significance.
Download or read book Biobased Lubricants and Greases written by Lou Honary and published by John Wiley & Sons. This book was released on 2011-06-28 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the rise in petroleum prices as well as increasing environmental concerns, there is a need to develop biochemicals and bioproducts that offer realistic alternatives to their traditional counterparts; this book will address the lack of a centralized resource of information on lubricants and greases from renewable sources, and will be useful to a wide audience in industry and academia. It is based on 20 years of research and development at the UNI-NABL Center, and discusses the various types of vegetable oils available, comparing their characteristics, properties and benefits against those of typical petroleum oils as well as discussing common evaluation tests and giving examples and case studies of successful applications of biobased lubricants and greases. Whilst scientific and engineering research data is included, the book is written in an accessible manner and is illustrated throughout. Focuses on an industrial application of lubrication technology undergoing current explosive growth in the global market. Includes a detailed review of the material benefits of plant-based lubricants that include a better viscosity index and lubricity even at extreme temperatures, lower flammability due to higher flash points and lower pour points. Covers the basic chemistry of vegetable oils as well as their profiles for use in lubricants and greases and environmental benefits. Includes examples and case studies of where vegetable-based lubricants have been successfully employed in industry applications.
Download or read book Grease Lubrication in Rolling Bearings written by Piet M. Lugt and published by John Wiley & Sons. This book was released on 2013-02-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal and dynamics properties. Later chapters cover the dynamics of greased bearings, including grease life, bearing life, reliability and testing. The final chapter covers lubrications systems – the systems that deliver grease to the components requiring lubrication. Grease Lubrication in Rolling Bearings: Describes the underlying physical and chemical properties of grease. Discusses the effect of load, speed, temperature, bearing geometry, bearing materials and grease type on bearing wear. Covers both bearing and grease performance, including thermo-mechanical ageing and testing methodologies. It is intended for researchers and engineers in the petro-chemical and bearing industry, industries related to this (e.g. wind turbine industry, automotive industry) and for application engineers. It will also be of interest for teaching in post-graduate courses.