Download or read book Lubricant Properties An written by Jacques Denis and published by Editions OPHRYS. This book was released on 2000 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Lubricants written by Marika Torbacke and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those working with tribology often have a background in mechanical engineering, while people working with lubricant development have a chemistry/chemical engineering background. This means they have a tradition of approaching problems in different ways. Today’s product development puts higher demands on timing and quality, requiring collaboration between people with different backgrounds. However, they can lack understanding of each other’s challenges as well as a common language, and so this book aims to bridge the gap between these two areas. Lubricants: Introduction to Properties and Performance provides an easy to understand overview of tribology and lubricant chemistry. The first part of the book is theoretical and provides an introduction to tribological contact, friction, wear and lubrication, as well as the basic concepts regarding properties and the most commonly made analyses on lubricants. Base fluids and their properties and common additives used in lubricants are also covered. The second part of the book is hands-on and introduces the reader to the actual formulations and the evaluation of their performance. Different applications and their corresponding lubricant formulations are considered and tribological test methods are discussed. Finally used oil characterisation and surface characterisation are covered which give the reader an introduction to different methods of characterising used oils and surfaces, respectively. Key features: Combines chemistry and tribology of lubricants into one unified approach Covers the fundamental theory, describing lubricant properties as well as base fluids and additives Contains practical information on the formulations of lubricants and evaluates their performance Considers applications of lubricants in hydraulics, gears and combustion engines Lubricants: Introduction to Properties and Performance is a comprehensive reference for industry practitioners (tribologists, lubricant technicians, and lubricant chemists, etc) and is also an excellent source of information for graduate and undergraduate students.
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book Lubricants and Related Products written by Dieter Klamann and published by . This book was released on 1984 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuels and Lubricants Handbook written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lubricant Blending and Quality Assurance written by R. David Whitby and published by CRC Press. This book was released on 2018-10-24 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people, including those involved in the manufacturing, marketing and selling of lubricants, believe that blending lubricants is simply a matter of putting one or more base oils and several additives into a tank of some kind and stirring them around to mix them. Blending lubricants that meet customers’ demands requires much more than this. The correct ingredients of the right quality need to be used in precisely controlled quantities. The ingredients need to be tested prior to blending and the finished products need to be tested following blending. The ingredients need to be stored and mixed under carefully controlled conditions. The finished lubricants need to be stored and packaged carefully and then delivered to customers correctly. This book discusses all of these issues, describes the different types of equipment used to blend lubricants, provides guidance on how best to use this equipment, and offers tips and techniques to help to avoid problems. It focuses on liquid lubricants. Greases are not discussed, as their manufacture involves very different manufacturing procedures compared with those concerned with liquid lubricants. The book starts with descriptions and discussion of the properties and characteristics of the main types of mineral and synthetic base oils, as well as the properties and characteristics of the main types of additives that are used in lubricant formulations. Criteria and methodologies used to design both new and upgraded blending plants are covered next. The types and operation of the equipment used in lubricant blending plants are described and discussed, together with a chapter on how to avoid problems before, during, and after blending. Testing and analysis of base oils, additives, and blended lubricants are covered in two separate chapters. Procedures for quality control and quality management in lubricant blending plants are also discussed in two separate chapters. Types of packages for lubricants are reviewed, together with methods for filling packages and methods for transporting lubricants in bulk. The storage of lubricants and supply chain management is also covered in depth.
Download or read book Grease Lubrication in Rolling Bearings written by Piet M. Lugt and published by John Wiley & Sons. This book was released on 2013-02-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal and dynamics properties. Later chapters cover the dynamics of greased bearings, including grease life, bearing life, reliability and testing. The final chapter covers lubrications systems – the systems that deliver grease to the components requiring lubrication. Grease Lubrication in Rolling Bearings: Describes the underlying physical and chemical properties of grease. Discusses the effect of load, speed, temperature, bearing geometry, bearing materials and grease type on bearing wear. Covers both bearing and grease performance, including thermo-mechanical ageing and testing methodologies. It is intended for researchers and engineers in the petro-chemical and bearing industry, industries related to this (e.g. wind turbine industry, automotive industry) and for application engineers. It will also be of interest for teaching in post-graduate courses.
Download or read book Biolubricants written by Jan C.J. Bart and published by Elsevier. This book was released on 2012-12-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricants are essential in engineering, however more sustainable formulations are needed to avoid adverse effects on the ecosystem. Bio-based lubricant formulations present a promising solution. Biolubricants: Science and technology is a comprehensive, interdisciplinary and timely review of this important subject.Initial chapters address the principles of lubrication, before systematically reviewing fossil and bio-based feedstock resources for biodegradable lubricants. Further chapters describe catalytic, (bio) chemical functionalisation processes for transformation of feedstocks into commercial products, product development, relevant legislation, life cycle assessment, major product groups and specific performance criteria in all major applications. Final chapters consider markets for biolubricants, issues to consider when selecting and using a lubricant, lubricant disposal and future trends.With its distinguished authors, Biolubricants: Science and technology is a comprehensive reference for an industrial audience of oil formulators and lubrication engineers, as well as researchers and academics with an interest in the subject. It provides an essential overview of scientific and technological developments enabling the cost-effective improvement of biolubricants, something that is crucial for the green future of the lubricant industry. - A comprehensive, interdisciplinary and timely review of bio-based lubricant formulations - Addresses the principles of lubrication - Reviews fossil and bio-based feedstock resources for biodegradable lubricants
Download or read book Mechanics and Chemistry in Lubrication written by A. Dorinson and published by Elsevier. This book was released on 1985-08-01 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although it is widely recognized that friction, wear and lubrication are linked together in a single interdisciplinary complex of scientific learning and technological practice, fragmented and specialized approaches still predominate. In this book, the authors examine lubrication from an interdisciplinary viewpoint. They demonstrate that once the treatment of lubrication is released from the confines of the fluid film concept, this interdisciplinary approach comes into full play. Tribological behavior in relation to lubrication is then examined from two major points of view: one is mechanical, not only with respect to the properties and behavior of the lubricant but also of the surfaces being lubricated. The other is chemical and encompasses the chemistry of the lubricant, the surfaces and the ambient surroundings. It is in the emphasis on the interaction of the basic mechanical and chemical processes in lubrication that this book differs from conventional treatments.
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has precededan understandingofthescientificprinciples. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding ofthe chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who requirea more fundamental understanding oflubricants.
Download or read book Tribology written by Jürgen Gegner and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the subject of tribology comprises lubrication, friction and wear of contact components highly relevant to practical applications, it challenges scientists from chemistry, physics and materials engineering around the world on todays sophisticated experimental and theoretical foundation to complex interdisciplinary research. Recent results and developments are preferably presented and evaluated in the context of established knowledge. Consisting of eleven chapters divided into the four parts of Lubrication and Properties of Lubricants, Boundary Lubrication Applications, Testing and Modeling, and Sustainability of Tribosystems, this textbook therefore merges basic concepts with new findings and approaches. Tribology Fundamentals and Advancements, supported by competent authors, aims to convey current research trends in the light of the state of the art to students, scientists and practitioners and help them solve their problems.
Download or read book Lubrication and Lubricant Selection written by A. R. Lansdown and published by American Society of Mechanical Engineers. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides guidance to lubrication practice in industry, with the emphasis on practical application. He covers the appropriate selection of lubricants for a wide range of uses and the factors that determine their suitability. Topics include: basic principles of lubrication; selection of lubricating oils; oil supply and systems, oil changing, and conservation; greases and anti-seizes; dry bearings, solid lubrication, and gas bearings; sealing; lubricant testing, specification, monitoring, handling and storage; health and safety.
Download or read book Lubrication of Electrical and Mechanical Components in Electric Power Equipment written by Bella H. Chudnovsky and published by CRC Press. This book was released on 2019-04-24 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubrication of Electrical and Mechanical Components in Electric Power Equipment presents an analysis of multiple applications of lubricants in the power industry for both electrical and mechanical parts. One of the key features of this book includes a look at the use of lubricants for surfaces of electrical and mechanical parts protection from mechanical wear and friction. Also included are examples of degradation due to fretting, as well as corrosion protection when lubricant is a barrier between metallic surfaces and atmospheric pollutants. This book analyzes the effects of chemical composition and consistency (fluids, greases, solid lubricants) and the durability of lubricants in regard to various types of contacts and mechanical parts material, design and load. Focused on the importance of carefully choosing the lubricants to maintain a stable contact resistance; preserve the physical integrity of the contact surface; and extend the useful life of mechanical parts, such as bearings, the author presents an exhaustive list of lubricants manufacturers and products recommended for use in the electrical industry.
Download or read book Solid Lubricants and Self Lubricating Solids written by Francis J. Clauss and published by Elsevier. This book was released on 2012-12-02 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Lubricants and Self-Lubricating Solids provides a concise treatment of solid lubricants and self-lubricating solids and their applications. These solid lubricants include graphite, molybdenum disulfide, plastics and thermoplastics, nylon, soft metals, fluorocarbons, and phenolics. Low-friction inorganic solids as well as miscellaneous inorganic compounds such as dichalcogenides and fluorides are also discussed. This book is comprised of 11 chapters and begins with an overview of some basic facts about friction and lubrication. The reader is then introduced to inorganic solid lubricants, their their crystal structure, advantages and disadvantages, and the forms in which they are most commonly used. The following chapters focus on the lubricating qualities of graphite, molybdenum disulfide, plastics and thermoplastics, nylon, soft metals, and fluorocarbons. Miscellaneous inorganic compounds with special applications involving friction and wear are also considered. The final chapter is devoted to phenolic laminates, their properties, and their mechanical applications such as gears and bearings. This monograph will be a useful resource for designers and operating engineers.
Download or read book Developments in Lubricant Technology written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: DEVELOPMENTS IN LUBRICANT TECHNOLOGY Examines all stages of Lubricant formulations, production and applications Developments in Lubricant Technology describes the basics of Lubricant formulations and their application in variety of equipment and engines. Divided into twenty chapters, this book provides an introduction to lubricant technology for users, young scientists and engineers desirous of understanding this subject. The book covers all major classes of lubricants including base oils (mineral, chemically modified and synthetic), followed by the description of chemical- additives and their evaluation. A brief chapter on the friction-wear and lubrication has been provided to understand the behaviour of lubricants in equipment. Major industrial oils such as turbine, hydraulic, gear, compressor and metal working fluids have been described. Automotive engine, gear and transmission oils for passenger cars, commercial vehicles, rail-road, marine, natural gas engines and 2T, 4T small engines have been discussed at length with latest specifications and global trends. Various synthetic oils and environmentally friendly products have also been described in the relevant chapters to understand the critical applications of such products in modern equipment and engines. Finally lubricants blending technology, quality control, their storage, handling, re-refining and condition monitoring in equipment have been discussed along with the typical lubricant tests and their significance.
Download or read book Mitigating Environmental Impact of Petroleum Lubricants written by Ignatio Madanhire and published by Springer. This book was released on 2016-06-09 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores effective environmental impact mitigation for petroleum-based lubricants to reduce their negative persistence during usage and upon end-of-life disposal. The book reviews the basic tribology of lubricants as well as initiatives that may enhance the environmental and economic effectiveness of lubricating oils from the composition design perspective across industries. Considering the blending, application, and disposal of petroleum lubricants in a holistic manner, the book presents and extends current best practices that minimize or eliminate adverse environmental impact throughout the product’s life cycle. The book reviews methods including: raw material substitution, minimizing oil losses during and after manufacturing, raw material and energy consumption reduction, and environmentally friendly applications of oil disposal as ways forward for cleaner and more effective production. This book provides readers with strategies for incorporating cleaner production practices into their operations – a benefit to both environmental legal compliance and business competitiveness – all the while preserving the environment for sustainable development. The book is therefore of interest to both manufacturers and consumers in the lubricants industry.
