Download or read book Lubricant Base Oil and Wax Processing written by Avilino Sequeira and published by CRC Press. This book was released on 1994-08-09 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides state-of-the-art information on all processes currently used to manufacture lubricant base oils and waxes-offering practical, timesaving solutions for specific on-the-job problems. Furnishes helpful lists of conversion factors, construction cost data, and process licensors, as well as a glossary of essential petroleum processing terms.

Download or read book Lubricant Base Oil and Wax Processing written by Avilino Sequeira and published by CRC Press. This book was released on 1994-08-09 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides state-of-the-art information on all processes currently used to manufacture lubricant base oils and waxes-offering practical, timesaving solutions for specific on-the-job problems. Furnishes helpful lists of conversion factors, construction cost data, and process licensors, as well as a glossary of essential petroleum processing terms.

Download or read book Process Chemistry of Lubricant Base Stocks written by Thomas R. Lynch and published by CRC Press. This book was released on 2007-09-21 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in processing methods are not only improving the quality and yield of lubricant base stocks, they are also reducing the dependence on more expensive crude oil starting materials. Process Chemistry of Lubricant Base Stocks provides a comprehensive understanding of the chemistry behind the processes involved in petroleum base stock p

Download or read book Encyclopedia of Lubricants and Lubrication written by Theo Mang and published by Springer. This book was released on 2014-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes.

Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants

Download or read book Turbine Lubrication in the 21st Century written by William R. Herguth and published by ASTM International. This book was released on 2001 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains eight papers from a June 2000 symposium held in Seattle, Washington, reporting on research related to the lubrication requirements of turbines used for power generation. Papers reflect two general trends in the field: the production of more stable lubricants, and the development of improved

Download or read book Developments in Lubricant Technology written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: DEVELOPMENTS IN LUBRICANT TECHNOLOGY Examines all stages of Lubricant formulations, production and applications Developments in Lubricant Technology describes the basics of Lubricant formulations and their application in variety of equipment and engines. Divided into twenty chapters, this book provides an introduction to lubricant technology for users, young scientists and engineers desirous of understanding this subject. The book covers all major classes of lubricants including base oils (mineral, chemically modified and synthetic), followed by the description of chemical- additives and their evaluation. A brief chapter on the friction-wear and lubrication has been provided to understand the behaviour of lubricants in equipment. Major industrial oils such as turbine, hydraulic, gear, compressor and metal working fluids have been described. Automotive engine, gear and transmission oils for passenger cars, commercial vehicles, rail-road, marine, natural gas engines and 2T, 4T small engines have been discussed at length with latest specifications and global trends. Various synthetic oils and environmentally friendly products have also been described in the relevant chapters to understand the critical applications of such products in modern equipment and engines. Finally lubricants blending technology, quality control, their storage, handling, re-refining and condition monitoring in equipment have been discussed along with the typical lubricant tests and their significance.

Download or read book Design Aspects of Used Lubricating Oil Re Refining written by Firas Awaja and published by Elsevier. This book was released on 2006-06-06 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Aspects of Used Lubricating Oil Re-Refining presents a feasible and comprehensive technology for recycling of used lubricating oils. This book discusses efficient and effective ways of reusing lubricating oil which, if implemented, will result in a better quality of life, the stability of the environment, the health of national economies and better relationships between nations. It presents essential experimental results for process designers and engineers to establish a complete process design. The conditions and behaviour in each step in the re-refining process, (dehydration, solvent extraction, solvent stripping, and vacuum distillation) are examined in order to discover ways to recover and reuse wastes that are produced by lubricating oils.•Addresses and demonstrates the current knowledge of the process behaviour and re-refining technology of used lubricating oils•Introduces background information on the lubrication, oil recycling industry outlining the major manufacturers and detailing their processes•Contains 94 figures and 22 tables that on results regarding the re-refining process behaviour of used lubricating oil

Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricating practice has preceded an understanding of the scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the understanding of lubricant phenomena will continue to be developed at a molecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in and continuing improvements to lubricant performance and machinery, life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and understanding gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding of lubricants.

Download or read book Biolubricants written by Jan C.J. Bart and published by Elsevier. This book was released on 2012-12-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricants are essential in engineering, however more sustainable formulations are needed to avoid adverse effects on the ecosystem. Bio-based lubricant formulations present a promising solution. Biolubricants: Science and technology is a comprehensive, interdisciplinary and timely review of this important subject.Initial chapters address the principles of lubrication, before systematically reviewing fossil and bio-based feedstock resources for biodegradable lubricants. Further chapters describe catalytic, (bio) chemical functionalisation processes for transformation of feedstocks into commercial products, product development, relevant legislation, life cycle assessment, major product groups and specific performance criteria in all major applications. Final chapters consider markets for biolubricants, issues to consider when selecting and using a lubricant, lubricant disposal and future trends.With its distinguished authors, Biolubricants: Science and technology is a comprehensive reference for an industrial audience of oil formulators and lubrication engineers, as well as researchers and academics with an interest in the subject. It provides an essential overview of scientific and technological developments enabling the cost-effective improvement of biolubricants, something that is crucial for the green future of the lubricant industry. - A comprehensive, interdisciplinary and timely review of bio-based lubricant formulations - Addresses the principles of lubrication - Reviews fossil and bio-based feedstock resources for biodegradable lubricants

Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.

Download or read book Encyclopedia of Tribology written by Q. Jane Wang and published by Springer. This book was released on 2013-09-26 with total page 4139 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY – the study of friction, wear and lubrication – impacts almost every aspect of our daily lives. The Springer Encyclopedia of Tribology is an authoritative and comprehensive reference covering all major aspects of the science and engineering of tribology that are relevant to researchers across all engineering industries and related scientific disciplines. This is the first major reference that brings together the science, engineering and technological aspects of tribology of this breadth and scope in a single work. Developed and written by leading experts in the field, the Springer Encyclopedia of Tribology covers the fundamentals as well as advanced applications across material types, different length and time scales, and encompassing various engineering applications and technologies. Exciting new areas such as nanotribology, tribochemistry and biotribology have also been included. As a six-volume set, the Springer Encyclopedia of Tribology comprises 1630 entries written by authoritative experts in each subject area, under the guidance of an international panel of key researchers from academia, national laboratories and industry. With alphabetically-arranged entries, concept diagrams and cross-linking features, this comprehensive work provides easy access to essential information for both researchers and practicing engineers in the fields of engineering (aerospace, automotive, biomedical, chemical, electrical, and mechanical) as well as materials science, physics, and chemistry.

Download or read book Lubricating Grease Manufacturing Technology written by Yu.L. Ishchuk and published by New Age International. This book was released on 2005 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating Grease (Or Grease, To Use A Short Name), Leaving Aside Synthetic Grease For The Moment, Is Arguably Amongst The Highest Value Added Petroleum Products. Lubricating Greases Play Very Crucial Role In The Performance Of Automobiles, Industrial Machinery And Appliances Which Almost Every One Of Us Use, Rely Upon Or Work With Everyday. Lubricating Greases Account For About 5% Of The Global Consumption Of The Lubricants, Which In Turn Account For About 1% Of All Petroleum Products. Thus, In Volume Terms, Lubricating Greases Constitute A Relatively Small, Specialized Industry. Nonetheless, The Importance Of Lubricating Greases Can Not Be Overemphasized. The World Would Quite Literally Grind To A Halt Without Lubricating Greases.There Are Not Many Books On Lubricating Greases. Even The Very Few Books That Are Available In English Language, Largely Encapsulate The Work And Knowledge Developed In North America And West Europe. Significant Scientific And Technological Advancements Were Achieved In The Erstwhile East Bloc Countries During The Second Half Of The 20Th Century. However, It Is Only Over The Last Two Decades That Those Outside The Erstwhile East Bloc Have Been Getting Glimpses Of The Prolific Work Done By Scientists And Technologists In That Part Of The World. This Book Endeavours To Further This Process In A Small Way.

Download or read book Lubricants and Waxes written by Dhananjoy Ghosh and published by CRC Press. This book was released on 2023-11-09 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers chemistry of lubricants and waxes up to technologies applied for their commercial production including technologies in commercial operation. Grease as a lubricant in solid form including various formulations characterizing grease and liquid lubricants has been extensively covered. The environment impacts of the processes along with environment friendly processes developed have also been covered along with data in the book. To make the book more practical, various plants’ operating conditions have been provided as a part of case studies. Features: Provides updated information on the process, technologies, and application especially for production of Group-II and III base oils. Covers theory behind the processes including stoichiometry of chemical reactions, physical and chemical structures, and theoretical text explanations. Includes mathematical equations and data to evaluate the actual operations and/or check design of the plant. Explores practical applications including commercial production of lubricants and waxes. Covers various industrial case studies. This book is aimed at Professionals in industries involving the application of lubricants and waxes.

Download or read book Developments in Lubricant Technology written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-07-11 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: DEVELOPMENTS IN LUBRICANT TECHNOLOGY Examines all stages of Lubricant formulations, production and applications Developments in Lubricant Technology describes the basics of Lubricant formulations and their application in variety of equipment and engines. Divided into twenty chapters, this book provides an introduction to lubricant technology for users, young scientists and engineers desirous of understanding this subject. The book covers all major classes of lubricants including base oils (mineral, chemically modified and synthetic), followed by the description of chemical- additives and their evaluation. A brief chapter on the friction-wear and lubrication has been provided to understand the behaviour of lubricants in equipment. Major industrial oils such as turbine, hydraulic, gear, compressor and metal working fluids have been described. Automotive engine, gear and transmission oils for passenger cars, commercial vehicles, rail-road, marine, natural gas engines and 2T, 4T small engines have been discussed at length with latest specifications and global trends. Various synthetic oils and environmentally friendly products have also been described in the relevant chapters to understand the critical applications of such products in modern equipment and engines. Finally lubricants blending technology, quality control, their storage, handling, re-refining and condition monitoring in equipment have been discussed along with the typical lubricant tests and their significance.

Download or read book Lubricants written by Marika Torbacke and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those working with tribology often have a background in mechanical engineering, while people working with lubricant development have a chemistry/chemical engineering background. This means they have a tradition of approaching problems in different ways. Today’s product development puts higher demands on timing and quality, requiring collaboration between people with different backgrounds. However, they can lack understanding of each other’s challenges as well as a common language, and so this book aims to bridge the gap between these two areas. Lubricants: Introduction to Properties and Performance provides an easy to understand overview of tribology and lubricant chemistry. The first part of the book is theoretical and provides an introduction to tribological contact, friction, wear and lubrication, as well as the basic concepts regarding properties and the most commonly made analyses on lubricants. Base fluids and their properties and common additives used in lubricants are also covered. The second part of the book is hands-on and introduces the reader to the actual formulations and the evaluation of their performance. Different applications and their corresponding lubricant formulations are considered and tribological test methods are discussed. Finally used oil characterisation and surface characterisation are covered which give the reader an introduction to different methods of characterising used oils and surfaces, respectively. Key features: Combines chemistry and tribology of lubricants into one unified approach Covers the fundamental theory, describing lubricant properties as well as base fluids and additives Contains practical information on the formulations of lubricants and evaluates their performance Considers applications of lubricants in hydraulics, gears and combustion engines Lubricants: Introduction to Properties and Performance is a comprehensive reference for industry practitioners (tribologists, lubricant technicians, and lubricant chemists, etc) and is also an excellent source of information for graduate and undergraduate students.

Download or read book The Significance of Tests for Petroleum Products written by Salvatore J. Rand and published by ASTM International. This book was released on with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: