Download or read book Ultra Low Voltage Nano Scale Memories written by Kiyoo Itoh and published by Springer Science & Business Media. This book was released on 2007-09-04 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-low voltage large-scale integrated circuits (LSIs) in nano-scale technologies are needed both to meet the needs of a rapidly growing mobile cell phone market and to offset a significant increase in the power dissipation of high-end microprocessor units. The goal of this book is to provide a detailed explanation of the state-of-the-art nanometer and sub-1-V memory LSIs that are playing decisive roles in power conscious systems. Emerging problems between the device, circuit, and system levels are systematically discussed in terms of reliable high-speed operations of memory cells and peripheral logic circuits. The effectiveness of solutions at device and circuit levels is also described at length through clarifying noise components in an array, and even essential differences in ultra-low voltage operations between DRAMs and SRAMs.
Download or read book Low Threshold Organic Semiconductor Lasers written by Yue Wang and published by Springer Science & Business Media. This book was released on 2013-10-01 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on two areas - the development of miniature plastic lasers that can be powered by LEDs, and the application of these lasers as highly sensitive sensors for vapours of nitroaromatic explosives (e.g. TNT). Polymer lasers are extremely compact visible lasers; the research described in the thesis is groundbreaking, driving forward the technology and physical understanding to allow these lasers to be routinely pumped by a single high-power LED. A notable advance in the work is the demonstration of nanoimprinted polymer lasers, which exhibit the world's lowest pump threshold densities by two orders of magnitude. The thesis also advances the application of these compact, novel lasers as highly sensitive detectors of explosive vapours, demonstrating that rapid detection can be achieved when microporous polymers are used. This work also demonstrates a prototype CMOS-based microsystem sensor for explosive vapours, exploiting a new detection approach.
Download or read book Monolithic Phase Locked Loops and Clock Recovery Circuits written by Behzad Razavi and published by John Wiley & Sons. This book was released on 1996-04-18 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring an extensive 40 page tutorial introduction, this carefully compiled anthology of 65 of the most important papers on phase-locked loops and clock recovery circuits brings you comprehensive coverage of the field-all in one self-contained volume. You'll gain an understanding of the analysis, design, simulation, and implementation of phase-locked loops and clock recovery circuits in CMOS and bipolar technologies along with valuable insights into the issues and trade-offs associated with phase locked systems for high speed, low power, and low noise.
Download or read book Silicon Optoelectronic Integrated Circuits written by Horst Zimmermann and published by Springer. This book was released on 2019-01-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the circuit design of silicon optoelectronic integrated circuits (OEICs), which are central to advances in wireless and wired telecommunications. The essential features of optical absorption are summarized, as is the device physics of photodetectors and their integration in modern bipolar, CMOS, and BiCMOS technologies. This information provides the basis for understanding the underlying mechanisms of the OEICs described in the main part of the book. In order to cover the topic comprehensively, Silicon Optoelectronic Integrated Circuits presents detailed descriptions of many OEICs for a wide variety of applications from various optical sensors, smart sensors, 3D-cameras, and optical storage systems (DVD) to fiber receivers in deep-sub-μm CMOS. Numerous detailed illustrations help to elucidate the material.
Download or read book Innovations in Electronics and Communication Engineering written by H. S. Saini and published by Springer. This book was released on 2019-02-07 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the 7th International Conference on Innovations in Electronics and Communication Engineering, held at Guru Nanak Institutions in Hyderabad, India. It highlights contributions by researchers, technocrats and experts regarding the latest technologies in electronic and communication engineering, and addresses various aspects of communication engineering, including signal processing, VLSI design, embedded systems, wireless communications, and electronics and communications in general. Covering cutting-edge technologies, the book offers a valuable resource, especially for young researchers.
Download or read book VLSI Memory Chip Design written by Kiyoo Itoh and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic description of microelectronic device design. Topics range from the basics to low-power and ultralow-voltage designs, subthreshold current reduction, memory subsystem designs for modern DRAMs, and various on-chip supply-voltage conversion techniques. It also covers process and device issues as well as design issues relating to systems, circuits, devices and processes, such as signal-to-noise and redundancy.
Download or read book VLSI Design and Test written by Brajesh Kumar Kaushik and published by Springer. This book was released on 2017-12-21 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Symposium on VLSI Design and Test, VDAT 2017, held in Roorkee, India, in June/July 2017. The 48 full papers presented together with 27 short papers were carefully reviewed and selected from 246 submissions. The papers were organized in topical sections named: digital design; analog/mixed signal; VLSI testing; devices and technology; VLSI architectures; emerging technologies and memory; system design; low power design and test; RF circuits; architecture and CAD; and design verification.
Download or read book Emerging Technology Trends in Electronics Communication and Networking written by Shilpi Gupta and published by Springer Nature. This book was released on 2020-07-22 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes refereed proceedings of the Third International Conference on Emerging Technology Trends in Electronics, Communication and Networking, ET2ECN 2020, held in Surat, India, in February 2020. The 17 full papers and 6 short papers presented were thorougly reviewed and selected from 70 submissions. The volume covers a wide range of topics including electronic devices, VLSI design and fabrication, photo electronics, systems and applications, integrated optics, embedded systems, wireless communication, optical communication, free space optics, signal processing, image/ audio/ video processing, wireless sensor networks, next generation networks, network security, and many others.
Download or read book IEICE Transactions on Electronics written by and published by . This book was released on 2003 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book DRAM Circuit Design written by Brent Keeth and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern, comprehensive introduction to DRAM for students and practicing chip designers Dynamic Random Access Memory (DRAM) technology has been one of the greatestdriving forces in the advancement of solid-state technology. With its ability to produce high product volumes and low pricing, it forces solid-state memory manufacturers to work aggressively to cut costs while maintaining, if not increasing, their market share. As a result, the state of the art continues to advance owing to the tremendous pressure to get more memory chips from each silicon wafer, primarily through process scaling and clever design. From a team of engineers working in memory circuit design, DRAM Circuit Design gives students and practicing chip designers an easy-to-follow, yet thorough, introductory treatment of the subject. Focusing on the chip designer rather than the end user, this volume offers expanded, up-to-date coverage of DRAM circuit design by presenting both standard and high-speed implementations. Additionally, it explores a range of topics: the DRAM array, peripheral circuitry, global circuitry and considerations, voltage converters, synchronization in DRAMs, data path design, and power delivery. Additionally, this up-to-date and comprehensive book features topics in high-speed design and architecture and the ever-increasing speed requirements of memory circuits. The only book that covers the breadth and scope of the subject under one cover, DRAM Circuit Design is an invaluable introduction for students in courses on memory circuit design or advanced digital courses in VLSI or CMOS circuit design. It also serves as an essential, one-stop resource for academics, researchers, and practicing engineers.
Download or read book Charge Pump IC Design written by Feng Pan and published by McGraw Hill Professional. This book was released on 2015-07-27 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design state-of-the-art charge pumps Charge Pump IC Design delivers an advanced systematic approach to charge pump circuit design—from building blocks to final pump. The book describes how to achieve high power efficiency and low supply noise. Negative feedback control, compensation, and stability are discussed and real-world design examples with schematics are included. The proven techniques presented in this practical, cutting-edge guide will help you to provide the efficient power conversion needed for today’s portable electronic devices. Comprehensive coverage includes: Regulators and power converters Charge pump design specifications and design metrics Single stage charge pump Multi-stage charge pump Charge pump clock driver Charge pump stability analysis Charge pump design, regulation, and control by examples Charge pump applications
Download or read book Low Power CMOS Design written by Anantha Chandrakasan and published by John Wiley & Sons. This book was released on 1998-02-11 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of important papers provides a comprehensive overview of low-power system design, from component technologies and circuits to architecture, system design, and CAD techniques. LOW POWER CMOS DESIGN summarizes the key low-power contributions through papers written by experts in this evolving field.
Download or read book Wireless CMOS Frequency Synthesizer Design written by J. Craninckx and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent boom in the mobile telecommunication market has trapped the interest of almost all electronic and communication companies worldwide. New applications arise every day, more and more countries are covered by digital cellular systems and the competition between the several providers has caused prices to drop rapidly. The creation of this essentially new market would not have been possible without the ap pearance of smalI, low-power, high-performant and certainly low-cost mobile termi nals. The evolution in microelectronics has played a dominant role in this by creating digital signal processing (DSP) chips with more and more computing power and com bining the discrete components of the RF front-end on a few ICs. This work is situated in this last area, i. e. the study of the full integration of the RF transceiver on a single die. Furthermore, in order to be compatible with the digital processing technology, a standard CMOS process without tuning, trimming or post-processing steps must be used. This should flatten the road towards the ultimate goal: the single chip mobile phone. The local oscillator (LO) frequency synthesizer poses some major problems for integration and is the subject of this work. The first, and also the largest, part of this text discusses the design of the Voltage Controlled Oscillator (VCO). The general phase noise theory of LC-oscillators is pre sented, and the concept of effective resistance and capacitance is introduced to char acterize and compare the performance of different LC-tanks.
Download or read book Wirelessly Powered Sensor Networks and Computational RFID written by Joshua R. Smith and published by Springer Science & Business Media. This book was released on 2013-02-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wireless Identification and Sensing Platform (WISP) is the first of a new class of RF-powered sensing and computing systems. Rather than being powered by batteries, these sensor systems are powered by radio waves that are either deliberately broadcast or ambient. Enabled by ongoing exponential improvements in the energy efficiency of microelectronics, RF-powered sensing and computing is rapidly moving along a trajectory from impossible (in the recent past), to feasible (today), toward practical and commonplace (in the near future). This book is a collection of key papers on RF-powered sensing and computing systems including the WISP. Several of the papers grew out of the WISP Challenge, a program in which Intel Corporation donated WISPs to academic applicants who proposed compelling WISP-based projects. The book also includes papers presented at the first WISP Summit, a workshop held in Berkeley, CA in association with the ACM Sensys conference, as well as other relevant papers. The book provides a window into the fascinating new world of wirelessly powered sensing and computing.
Download or read book Design for AT Speed Test Diagnosis and Measurement written by Benoit Nadeau-Dostie and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for AT-Speed Test, Diagnosis and Measurement is the first book to offer practical and proven design-for-testability (DFT) solutions to chip and system design engineers, test engineers and product managers at the silicon level as well as at the board and systems levels. Designers will see how the implementation of embedded test enables simplification of silicon debug and system bring-up. Test engineers will determine how embedded test provides a superior level of at-speed test, diagnosis and measurement without exceeding the capabilities of their equipment. Product managers will learn how the time, resources and costs associated with test development, manufacture cost and lifecycle maintenance of their products can be significantly reduced by designing embedded test in the product. A complete design flow and analysis of the impact of embedded test on a design makes this book a `must read' before any DFT is attempted.
Download or read book Compact Low Voltage and High Speed CMOS BiCMOS and Bipolar Operational Amplifiers written by Klaas-Jan de Langen and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Low-Voltage and High-Speed CMOS, BiCMOS and Bipolar Operational Amplifiers discusses the design of integrated operational amplifiers that approach the limits of low supply voltage or very high bandwidth. The resulting realizations span the whole field of applications from micro-power CMOS VLSI amplifiers to 1-GHz bipolar amplifiers. The book presents efficient circuit topologies in order to combine high performance with simple solutions. In total twelve amplifier realizations are discussed. Two bipolar amplifiers are discussed, a 1-GHz operational amplifier and an amplifier with a high ratio between the maximum output current and the quiescent current. Five amplifiers have been designed in CMOS technology, extremely compact circuits that can operate on supply voltages down to one gate-source voltage and two saturation voltages which equals about 1.4 V and, ultimate-low-voltage amplifiers that can operate on supply voltages down to one gate-source voltage and one saturation voltage which amounts to about 1.2 V. In BiCMOS technology five amplifiers have been designed. The first two amplifiers are based on a compact topology. Two other amplifiers are designed to operate on low supply voltages down to 1.3 V. The final amplifier has a unity-gain frequency of 200 MHz and can operate down to 2.5 V. Compact Low-Voltage and High-Speed CMOS, BiCMOS and Bipolar Operational Amplifiers is intended for the professional analog designer. Also, it is suitable as a text book for advanced courses in amplifier design.
Download or read book 2001 International Symposium on VLSI Technology Systems and Applications written by IEEE, Taipei Section Staff and published by . This book was released on 2001 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
