Download or read book Low temperature Synthesis and Electrochemical Properties of Aliovalently doped Phosphates and Spinel Oxides written by Arturo Gutierrez and published by . This book was released on 2014 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium-ion batteries are being intensely pursued as energy storage devices because they provide higher energy and power densities compared to other battery systems such as lead-acid and nickel-metal hydride batteries. This dissertation (i) explores the use of a low-temperature microwave-assisted synthesis process to obtain aliovalently-doped lithium transition-metal phosphates and lower-valent vanadium oxide spinels, some of which are difficult to obtain by conventional high-temperature processes, and (ii) presents an investigation of the electrochemical properties of the aliovantly-doped phosphate cathodes and doped lithium manganese oxide and oxyfluoride spinel cathodes in lithium-ion batteries. Following the introduction and general experimental procedures, respectively, in Chapters 1 and 2, Chapter 3 first focuses on understanding of how the inductive effect and structural features in lithium transition-metal borate, silicate, and phosphate cathodes affect the M2+ʹ3+redox energies. It is found that the magnitude of the voltages delivered by the polyanion cathodes can be predicted based simply on the coordination of the transition-metal ion. Furthermore, the differences in the voltages delivered by the phosphates and pyrophosphates are explained by considering the resonance structures and their contribution to the covalency of the polyanion. Chapter 4 presents a low-temperature microwave-assisted solvothermal process to substitute 20 atom % V3+ for Mn2+ in LiMnPO4. It is shown that the solubility of vanadium in LiMnPO4 decreases upon heating the doped samples to ≥ 575 °C, demonstrating the importance of employing a low-temperature process to achieve aliovalent doping in LiMnPO4. It is further demonstrated that by increasing the vanadium content in the material, the discharge capacity in the first cycle could be increased without any additional carbon coating. Subsequent X-ray absorption spectroscopy data reveal that the better performance is facilitated by enhanced Mn-O hybridization upon incorporating vanadium into the lattice. Chapter 5 explores the influence of various factors, such as the oxidation state of Mn, electronegativity of the dopant cation Mn+, and the dissociation energy of M-O bond, on the electrochemical properties of cation-doped oxide and oxyfluoride spinel cathodes. As an extension, Chapter 6 presents the effect of processing conditions on the surface concentration of the dopant cation Mn+. Chapter 7 presents an extension of the low-temperature microwave-assisted synthesis process to obtain AV2O4 (Mg, Fe, Mn, and Co) spinel oxides. The method is remarkably effective in reducing the synthesis time and energy use due to the efficiency of dielectric heating compared to conventional heating. The ability to access V3+ is facilitated by the relative positions of the energy levels of the cations in solution, which is lower than that in the solid, and the use of a strong reducing solvent like TEG. Finally, Chapter 8 provides a summary of the salient findings in this dissertation.
Download or read book Nonstoichiometric Oxides written by O.T. Soerensen and published by Elsevier. This book was released on 2012-12-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonstoichiometric Oxides discusses the thermodynamic and structural studies of nonstoichiometric oxides. This eight-chapter text also covers the defect-defect interactions in these compounds. The introductory chapters describe the thermodynamic properties of nonstoichiometric oxides in terms of defect complexes using the classical thermodynamic principles and from a statistical thermodynamics point of view. These chapters also include statistical thermodynamic models that indicate the ordered nonstoichiometric phase range in these oxides. The subsequent chapters examine the transport properties, such as diffusion and electrical conductivity. Diffusion theories and experimental diffusion coefficients for several systems, as well as the electrical properties of the highly defective ionic and mixed oxide conductor, are specifically tackled in these chapters. The concluding chapters present the pertinent results obtained in nonstoichiometric oxide structural studies using high-resolution electron microscopy and X-ray and neutron diffraction. Inorganic chemists and inorganic chemistry teachers and students will greatly appreciate this book.
Download or read book Nanoscale Materials written by Luis M. Liz-Marzán and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized nanoassemblies of inorganic nanoparticles and organic molecules are building blocks of nanodevices, whether they are designed to perform molecular level computing, sense the environment or improve the catalytic properties of a material. The key to creation of these hybrid nanostructures lies in understanding the chemistry at a fundamental level. This book serves as a reference book for researchers by providing fundamental understanding of many nanoscopic materials.
Download or read book Ceramic Abstracts written by and published by . This book was released on 2000 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Electrolytes for Advanced Applications written by Ramaswamy Murugan and published by Springer Nature. This book was released on 2019-12-11 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the state of the art in solid electrolytes, with particular emphasis on lithium garnets, electrolyte-electrode interfaces and all-solid-state batteries based on lithium garnets. Written by an international group of renowned experts, the book addresses how garnet-type solid electrolytes are contributing to the development of safe high energy density Li batteries. Unlike the flammable organic liquid electrolyte used in existing rechargeable Li batteries, garnet-type solid electrolytes are intrinsically chemically stable in contact with metallic lithium and potential positive electrodes, while offering reasonable Li conductivity. The book's respective chapters cover a broad spectrum of topics related to solid electrolytes, including interfacial engineering to resolve the electrolyte-electrode interfaces, the latest developments in the processing of thin and ultrathin lithium garnet membranes, and fabrication strategies for the high-performance solid-state batteries.This highly informative and intriguing book will appeal to postgraduate students and researchers at academic and industrial laboratories with an interest in the advancement of high energy-density lithium metal batteries
Download or read book Lithium ion Batteries written by and published by . This book was released on 2019 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is the first machine-generated scientific book in chemistry published by Springer Nature. Serving as an innovative prototype defining the current status of the technology, it also provides an overview about the latest trends of lithium-ion batteries research. This book explores future ways of informing researchers and professionals. State-of-the-art computer algorithms were applied to: select relevant sources from Springer Nature publications, arrange these in a topical order, and provide succinct summaries of these articles. The result is a cross-corpora auto-summarization of current texts, organized by means of a similarity-based clustering routine in coherent chapters and sections. This book summarizes more than 150 research articles published from 2016 to 2018 and provides an informative and concise overview of recent research into anode and cathode materials as well as further aspects such as separators, polymer electrolytes, thermal behavior and modelling. With this prototype, Springer Nature has begun an innovative journey to explore the field of machine-generated content and to find answers to the manifold questions on this fascinating topic. Therefore it was intentionally decided not to manually polish or copy-edit any of the texts so as to highlight the current status and remaining boundaries of machine-generated content. Our goal is to initiate a broad discussion, together with the research community and domain experts, about the future opportunities, challenges and limitations of this technology."--Publisher's website.
Download or read book Materials for Lithium Ion Batteries written by Christian Julien and published by Springer Science & Business Media. This book was released on 2000-10-31 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: A lithium-ion battery comprises essentially three components: two intercalation compounds as positive and negative electrodes, separated by an ionic-electronic electrolyte. Each component is discussed in sufficient detail to give the practising engineer an understanding of the subject, providing guidance on the selection of suitable materials in actual applications. Each topic covered is written by an expert, reflecting many years of experience in research and applications. Each topic is provided with an extensive list of references, allowing easy access to further information. Readership: Research students and engineers seeking an expert review. Graduate courses in electrical drives can also be designed around the book by selecting sections for discussion. The coverage and treatment make the book indispensable for the lithium battery community.
Download or read book Energy Storage written by Robert Huggins and published by Springer. This book was released on 2015-11-13 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Storage explains the underlying scientific and engineering fundamentals of all major energy storage methods. These include the storage of energy as heat, in phase transitions and reversible chemical reactions, and in organic fuels and hydrogen, as well as in mechanical, electrostatic and magnetic systems. Updated coverage of electrochemical storage systems considers exciting developments in materials and methods for applications such as rapid short-term storage in hybrid and intermittent energy generation systems, and battery optimization for increasingly prevalent EV and stop-start automotive technologies. This nuanced coverage of cutting-edge advances is unique in that it does not require prior knowledge of electrochemistry. Traditional and emerging battery systems are explained, including lithium, flow and liquid batteries. Energy Storage provides a comprehensive overview of the concepts, principles and practice of energy storage that is useful to both students and professionals.
Download or read book Fast Ion Transport in Solids written by B. Scrosati and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main motivation for the organization of the Advanced Research Workshop in Belgirate was the promotion of discussions on the most recent issues and the future perspectives in the field of Solid State lonics. The location was chosen on purpose since Belgirate was the place were twenty years ago, also then under the sponsorship of NATO, the very first international meeting on this important and interdisciplinary field took place. That meeting was named "Fast Ion Transport in Solids" and gathered virtually everybody at that time having been active in any aspect of motion of ions in solids. The original Belgirate Meeting made for the first time visible the technological potential related to the phenomenon of the fast ionic transport in solids and, accordingly, the field was given the name "Solid State lonics". This field is now expanded to cover a wide range of technologies which includes chemical sensors for environmental and process control, electrochromic windows, mirrors and displays, fuel cells, high performance rechargeable batteries for stationary applications and electrotraction, chemotronics, semiconductor ionics, water electrolysis cells for hydrogen economy and other applications. The main idea for holding an anniversary meeting was that of discussing the most recent issues and the future perspectives of Solid State lonics just twenty years after it has started at the same location on the lake Maggiore in North Italy.
Download or read book New Trends in Intercalation Compounds for Energy Storage written by Christian Julien and published by Springer Science & Business Media. This book was released on 2002-04-30 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in electrochemistry and materials science have opened the way to the evolution of entirely new types of energy storage systems: rechargeable lithium-ion batteries, electrochroms, hydrogen containers, etc., all of which have greatly improved electrical performance and other desirable characteristics. This book encompasses all the disciplines linked in the progress from fundamentals to applications, from description and modelling of different materials to technological use, from general diagnostics to methods related to technological control and operation of intercalation compounds. Designing devices with higher specific energy and power will require a more profound understanding of material properties and performance. This book covers the status of materials and advanced activities based on the development of new substances for energy storage.
Download or read book High Entropy Materials written by Yong Zhang and published by Springer. This book was released on 2019-05-27 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws on the latest research to discuss the history and development of high-entropy alloys and ceramics in bulk, film, and fiber form. High-entropy materials have recently been developed using the entropy of mixing and entropy of configuration of materials, and have proven to exhibit unique properties superior to those of conventional materials. The field of high-entropy alloys was born in 2004, and has since been developed for both scientific and engineering applications. Although there is extensive literature, this field is rapidly transforming. This book highlights the cutting edge of high-entropy materials, including their fundamentals and applications. Above all, it reflects two major milestones in their development: the equi-atomic ratio single-phase high-entropy alloys; and the non-equi-atomic ratio dual-phase high-entropy alloys.
Download or read book Materials for Advanced Batteries written by D. Murphy and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of a NATO Science Committee Institute on "Materials for Advanced Batteries" was suggested to JB and DWM by Dr. A. G. Chynoweth. His idea was to bring together experts in the field over the entire spectrum of pure research to applied research in order to familiarize everyone with potentially interesting new systems and the problems involved in their development. Dr. M. C. B. Hotz and Professor M. N. Ozdas were instrumental in helping organize this meeting as a NATO Advanced Science Institute. An organlzlng committee consisting of the three of us along with W. A. Adams, U. v Alpen, J. Casey and J. Rouxel organized the program. The program consisted of plenary talks and poster papers which are included in this volume. Nearly half the time of the conference was spent in study groups. The aim of these groups was to assess the status of several key aspects of batteries and prospects for research opportunities in each. The study groups and their chairmen were: Current status and new systems J. Broadhead High temperature systems W. A. Adams Interface problems B. C. H. Steele Electrolytes U. v Alpen Electrode materials J. Rouxel These discussions are summarized in this volume. We and all the conference participants are most grateful to Professor J. Rouxel for suggesting the Aussois conference site, and to both he and Dr. M. Armand for handling local arrangements.
Download or read book Photoelectrocatalysis written by Leonardo Palmisano and published by Elsevier. This book was released on 2022-10-21 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrocatalysis: Fundamentals and Applications presents an in-depth review of the topic for students and researchersworking on photoelectrocatalysis-related subjects from pure chemistry to materials and environmental chemistry inorder to propose applications and new perspectives. The main advantage of a photoelectrocatalytic process is the mildexperimental conditions under which the reactions are carried out, which are often possible at atmospheric pressure androom temperature using cheap and nontoxic solvents (e.g., water), oxidants (e.g., O2 from the air), catalytic materials (e.g.,TiO2 on Ti layer), and the potential exploitation of solar light. This book presents the fundamentals and the applications of photoelectrocatalysis, such as hydrogen production fromwater splitting, the remediation of harmful compounds, and CO2 reduction. Photoelectrocatalytic reactors and lightsources, in addition to kinetic aspects, are presented along with an exploration of the relationship between photocatalysisand electrocatalysis. In addition, photocorrosion issues and the application of selective photoelectrocatalytic organictransformations, which is now a growing field of research, are also reported. Finally, the advantages/disadvantages andfuture perspectives of photoelectrocatalysis are highlighted through the possibility of working at a pilot/industrial scale inenvironmentally friendly conditions. Presents the fundamentals of photoelectrocatalysis Outlines photoelectrocatalytic green chemistry Reviews photoelectrocatalytic remediation of harmful compounds, hydrogen production, and CO2 reduction Includes photocorrosion, photoelectrocatalytic reactors, and modeling along with kinetic aspects
Download or read book Thin Film Metal Oxides written by Shriram Ramanathan and published by Springer Science & Business Media. This book was released on 2009-12-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Film Metal-Oxides provides a representative account of the fundamental structure-property relations in oxide thin films. Functional properties of thin film oxides are discussed in the context of applications in emerging electronics and renewable energy technologies. Readers will find a detailed description of deposition and characterization of metal oxide thin films, theoretical treatment of select properties and their functional performance in solid state devices, from leading researchers. Scientists and engineers involved with oxide semiconductors, electronic materials and alternative energy will find Thin Film Metal-Oxides a useful reference.
Download or read book Na ion Batteries written by and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both the fundamental and applied aspects of advanced Na-ion batteries (NIB) which have proven to be a potential challenger to Li-ion batteries. Both the chemistry and design of positive and negative electrode materials are examined. In NIB, the electrolyte is also a crucial part of the batteries and the recent research, showing a possible alternative to classical electrolytes – with the development of ionic liquid-based electrolytes – is also explored. Cycling performance in NIB is also strongly associated with the quality of the electrode-electrolyte interface, where electrolyte degradation takes place; thus, Na-ion Batteries details the recent achievements in furthering knowledge of this interface. Finally, as the ultimate goal is commercialization of this new electrical storage technology, the last chapters are dedicated to the industrial point of view, given by two startup companies, who developed two different NIB chemistries for complementary applications and markets.
Download or read book Handbook of Transparent Conductors written by David S. Ginley and published by Springer Science & Business Media. This book was released on 2010-09-11 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent conducting materials are key elements in a wide variety of current technologies including flat panel displays, photovoltaics, organic, low-e windows and electrochromics. The needs for new and improved materials is pressing, because the existing materials do not have the performance levels to meet the ever- increasing demand, and because some of the current materials used may not be viable in the future. In addition, the field of transparent conductors has gone through dramatic changes in the last 5-7 years with new materials being identified, new applications and new people in the field. “Handbook of Transparent Conductors” presents transparent conductors in a historical perspective, provides current applications as well as insights into the future of the devices. It is a comprehensive reference, and represents the most current resource on the subject.
Download or read book Direct Liquid Fuel Cells written by Ramiz Gültekin Akay and published by Academic Press. This book was released on 2020-09-28 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Liquid Fuel Cells is a comprehensive overview of the fundamentals and specificities of the use of methanol, ethanol, glycerol, formic acid and formate, dimethyl ether, borohydride, hydrazine and other promising liquid fuels in fuel cells. Each chapter covers a different liquid fuel-based fuel cell such as: Anode catalysts of direct methanol fuel cells (DMFCs), future system designs and future trends for direct ethanol fuel cells (DEFCs), development of catalysts for direct glycerol fuel cells (DGFCs), the mechanisms of the reactions taking place at the anode and cathode electrodes, and the reported anode catalysts for direct formic acid fuel cell (DFAFC) and direct formate fuel cell (DFFC), characteristics of direct dimethyl ether fuel cell (DDMEFC), including its electrochemical and operating systems and design, the developments in direct borohydride fuel cells, the development of catalysts for direct hydrazine fuel cells (DHFCs), and also the uncommonly used liquids that have a potential for fuel cell applications including 2-propanol, ethylene glycol, ascorbic acid and ascorbate studied in the literature as well as utilization of some blended fuels. In each part, the most recent literature is reviewed and the state of the art is presented. It also includes examples of practical problems with solutions and a summarized comparison of performance, advantages, and limitations of each type of fuel cell discussed. Direct Liquid Fuel Cells is not a typical textbook but rather designed as a reference book of which any level of students (undergraduate or graduate), instructors, field specialists, industry and general audience, who benefit from current and complete understanding of the many aspects involved in the development and operation of these types of fuel cells, could make use of any chapter when necessary. Presents information on different types of direct liquid fuel cells. Explores information under each section, for specific fuel-based fuel cells in more detail in terms of the materials used. Covers three main sections: direct alcohol, organic fuel-based and inorganic fuel-based fuel cells
