Download or read book Low Temperature Processing of Thin Films for Flexible Electronics written by P. Joshi and published by The Electrochemical Society. This book was released on 2009-05 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented in the symposium ¿Novel Plasma Techniques for Low Temperature Processing of Thin Films for Flexible Electronics¿, held during the 215th meeting of The Electrochemical Society, in San Francisco, California from May 24 to 29, 2009.
Download or read book Low Temperature Processing of Thin Films for Flexible Electronics written by and published by . This book was released on 2009 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Electronics written by William S. Wong and published by Springer Science & Business Media. This book was released on 2009-04-09 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume covers a range of materials used for flexible electronics, including semiconductors, dielectrics, and metals. The functional integration of these different materials is treated as well. Fundamental issues for both organic and inorganic materials systems are included. A corresponding overview of technological applications, based on each materials system, is presented to give both the non-specialist and the researcher in the field relevant information on the status of the flexible electronics area.
Download or read book Silicon Nitride Silicon Dioxide and Emerging Dielectrics 11 written by Electrochemical society. Meeting and published by The Electrochemical Society. This book was released on 2011 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions contains the peer-reviewed full length papers of the International Symposium on Silicon Nitride, Silicon Dioxide, and Emerging Dielectrics held May 1-6, 2011 in Montreal as a part of the 219th Meeting of The Electrochemical Society. The papers address a very diverse range of topics. In addition to the deposition and characterization of the dielectrics, more specific topics addressed by the papers include applications, device characterization and reliability, interface states, interface traps, defects, transistor and gate oxide studies, and modeling.
Download or read book Low Temperature Processing for Silicon Thin Film Deposition written by Chau-Chen Chen and published by . This book was released on 1993 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Flexible Electronics written by Aftab M. Hussain and published by CRC Press. This book was released on 2021-12-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of flexible electronics has grown rapidly over the last two decades with diverse applications including wearable gadgets and medical equipment. This textbook comprehensively covers the fundamental aspects of flexible electronics along with materials and processing techniques. It discusses topics including flexural rigidity, flexible PCBs, organic semiconductors, nanostructured materials, material reliability, electronic reliability, crystalline and polymer materials, semiconductor processing, and flexible silicon in depth. The text covers advantages, disadvantages, and applications of processes such as sol-gel processing and ink-jet printing. Pedagogical features such as solved problems and unsolved exercises are interspersed throughout the text for better understanding. FEATURES Covers major areas such as materials, physics, processes, and applications of flexible electronics Contains homework problems for readers to understand concepts in an easy manner Discusses, in detail, various types of materials, such as flexible silicon, metal oxides, and organic semiconductors Explains the application of flexible electronics in displays, solar cells, and batteries Includes a section on stretchable electronics This textbook is primarily written for senior undergraduate and graduate students in electrical engineering, electronics, materials science, chemistry, and communication engineering for a course on flexible electronics. Teaching resources are available, including a solutions manual for instructors.
Download or read book Inkjet based Micromanufacturing written by Oliver Brand and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inkjet-based Micromanufacturing Inkjet technology goes way beyond putting ink on paper: it enables simpler, faster and more reliable manufacturing processes in the fields of micro- and nanotechnology. Modern inkjet heads are per se precision instruments that deposit droplets of fluids on a variety of surfaces in programmable, repeating patterns, allowing, after suitable modifications and adaptations, the manufacturing of devices such as thin-film transistors, polymer-based displays and photovoltaic elements. Moreover, inkjet technology facilitates the large-scale production of flexible RFID transponders needed, eg, for automated logistics and miniaturized sensors for applications in health surveillance. The book gives an introduction to inkjet-based micromanufacturing, followed by an overview of the underlying theories and models, which provides the basis for a full understanding and a successful usage of inkjet-based methods in current microsystems research and development Overview of Inkjet-based Micromanufacturing: Thermal Inkjet Theory and Modeling Post-Printing Processes for Inorganic Inks for Plastic Electronics Applications Inkjet Ink Formulations Inkjet Fabrication of Printed Circuit Boards Antennas for Radio Frequency Identification Tags Inkjet Printing for MEMS
Download or read book Thin Film Transistor Technologies TFTT VII written by Yue Kuo and published by The Electrochemical Society. This book was released on 2005 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale Ferroelectrics and Multiferroics written by Miguel Alguero and published by John Wiley & Sons. This book was released on 2016-03-24 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set reviews the key issues in processing and characterization of nanoscale ferroelectrics and multiferroics, and provides a comprehensive description of their properties, with an emphasis in differentiating size effects of extrinsic ones like boundary or interface effects. Recently described nanoscale novel phenomena are also addressed. Organized into three parts it addresses key issues in processing (nanostructuring), characterization (of the nanostructured materials) and nanoscale effects. Taking full advantage of the synergies between nanoscale ferroelectrics and multiferroics, the text covers materials nanostructured at all levels, from ceramic technologies like ferroelectric nanopowders, bulk nanostructured ceramics and thick films, and magnetoelectric nanocomposites, to thin films, either polycrystalline layer heterostructures or epitaxial systems, and to nanoscale free standing objects with specific geometries, such as nanowires and tubes at different levels of development. This set is developed from the high level European scientific knowledge platform built within the COST (European Cooperation in Science and Technology) Action on Single and multiphase ferroics and multiferroics with restricted geometries (SIMUFER, ref. MP0904). Chapter contributors have been carefully selected, and have all made major contributions to knowledge of the respective topics, and overall, they are among most respected scientists in the field.
Download or read book Chemical Solution Synthesis for Materials Design and Thin Film Device Applications written by Soumen Das and published by Elsevier. This book was released on 2021-01-09 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Solution Synthesis for Materials Design and Thin Film Device Applications presents current research on wet chemical techniques for thin-film based devices. Sections cover the quality of thin films, types of common films used in devices, various thermodynamic properties, thin film patterning, device configuration and applications. As a whole, these topics create a roadmap for developing new materials and incorporating the results in device fabrication. This book is suitable for graduate, undergraduate, doctoral students, and researchers looking for quick guidance on material synthesis and device fabrication through wet chemical routes. Provides the different wet chemical routes for materials synthesis, along with the most relevant thin film structured materials for device applications Discusses patterning and solution processing of inorganic thin films, along with solvent-based processing techniques Includes an overview of key processes and methods in thin film synthesis, processing and device fabrication, such as nucleation, lithography and solution processing
Download or read book Printed Electronics written by Zheng Cui and published by John Wiley & Sons. This book was released on 2016-04-13 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the newly emerged and highly interdisciplinary field of printed electronics • Provides an overview of the latest developments and research results in the field of printed electronics • Topics addressed include: organic printable electronic materials, inorganic printable electronic materials, printing processes and equipments for electronic manufacturing, printable transistors, printable photovoltaic devices, printable lighting and display, encapsulation and packaging of printed electronic devices, and applications of printed electronics • Discusses the principles of the above topics, with support of examples and graphic illustrations • Serves both as an advanced introductory to the topic and as an aid for professional development into the new field • Includes end of chapter references and links to further reading
Download or read book Influence of strain on the functionality of ink jet printed thin films and devices on flexible substrates written by Mishra, Nilesha and published by KIT Scientific Publishing. This book was released on 2019-02-15 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Large Area and Flexible Electronics written by Mario Caironi and published by John Wiley & Sons. This book was released on 2015-01-13 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: From materials to applications, this ready reference covers the entire value chain from fundamentals via processing right up to devices, presenting different approaches to large-area electronics, thus enabling readers to compare materials, properties and performance. Divided into two parts, the first focuses on the materials used for the electronic functionality, covering organic and inorganic semiconductors, including vacuum and solution-processed metal-oxide semiconductors, nanomembranes and nanocrystals, as well as conductors and insulators. The second part reviews the devices and applications of large-area electronics, including flexible and ultra-high-resolution displays, light-emitting transistors, organic and inorganic photovoltaics, large-area imagers and sensors, non-volatile memories and radio-frequency identification tags. With its academic and industrial viewpoints, this volume provides in-depth knowledge for experienced researchers while also serving as a first-stop resource for those entering the field.
Download or read book Solution Processed Metal Oxide Thin Films for Electronic Applications written by Zheng Cui and published by Elsevier. This book was released on 2020-06-11 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solution Processed Metal Oxide Thin Films for Electronic Applications discusses the fundamentals of solution processing materials chemistry techniques as they are applied to metal oxide materials systems for key device applications. The book introduces basic information (materials properties, materials synthesis, barriers), discusses ink formulation and solution processing methods, including sol-gel processing, surface functionalization aspects, and presents a comprehensive accounting on the electronic applications of solution processed metal oxide films, including thin film transistors, photovoltaic cells and other electronics devices and circuits. This is an important reference for those interested in oxide electronics, printed electronics, flexible electronics and large-area electronics. Provides in-depth information on solution processing fundamentals, techniques, considerations and barriers combined with key device applications Reviews important device applications, including transistors, light-emitting diodes, and photovoltaic cells Includes an overview of metal oxide materials systems (semiconductors, nanomaterials and thin films), addressing materials synthesis, properties, limitations and surface aspects
Download or read book Advanced Materials for Printed Flexible Electronics written by Colin Tong and published by Springer Nature. This book was released on 2021-10-04 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to printed flexible electronics and their applications, including the basics of modern printing technologies, printable inks, performance characterization, device design, modeling, and fabrication processes. A wide range of materials used for printed flexible electronics are also covered in depth. Bridging the gap between the creation of structure and function, printed flexible electronics have been explored for manufacturing of flexible, stretchable, wearable, and conformal electronics device with conventional, 3D, and hybrid printing technologies. Advanced materials such as polymers, ceramics, nanoparticles, 2D materials, and nanocomposites have enabled a wide variety of applications, such as transparent conductive films, thin film transistors, printable solar cells, flexible energy harvesting and storage devices, electroluminescent devices, and wearable sensors. This book provides students, researchers and engineers with the information to understand the current status and future trends in printed flexible electronics, and acquire skills for selecting and using materials and additive manufacturing processes in the design of printed flexible electronics.
Download or read book Tin Oxide Materials written by Marcelo Ornaghi Orlandi and published by Elsevier. This book was released on 2019-10-05 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tin Oxide Materials: Synthesis, Properties, and Applications discusses the latest in metal oxides, an emerging area in electronic materials. As more is learned about this important materials system, more functionalities and applications have been revealed. This key reference on the topic covers important material that is ideal for materials scientists, materials engineers and materials chemists who have been introduced to metal oxides as a general category of materials, but want to take the next step and learn more about a specific material. Provides a complete resource on tin oxide materials systems, including in-depth discussions of properties, their synthesis, modelling methods, and applications Presents information on the well-investigated SnO2, but also includes discussions on its emerging stoichiometries, such as SnO and Sn3O4 Includes the most relevant applications in varistors, sensing devices, fuel cells, transistors, biological studies, and much more
Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr
