Download or read book Biodiesel Combustion Performance and Emissions Characteristics written by Semakula Maroa and published by Springer Nature. This book was released on 2020-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on biodiesel combustion, including biodiesel performance, emissions and control. It brings together a range of international research in combustion studies in order to offer a comprehensive resource for researchers, students and academics alike. The book begins with an introduction to biodiesel combustion, followed by a discussion of NOx formation routes. It then addresses biodiesel production processes and oil feedstocks in detail, discusses the physiochemical properties of biodiesel, and explores the benefits and drawbacks of these properties. Factors influencing the formation of emissions, including NOx emissions, are also dealt with thoroughly. Lastly, the book discusses the mechanisms of pollution and different approaches used to reduce pollutants in connection with biodiesel. Each approach is considered in detail, and diagrams are provided to illustrate the points in line with industry standard control mechanisms.

Download or read book Application of Liquid Biofuels to Internal Combustion Engines written by Soo-Young No and published by Springer Nature. This book was released on 2020-02-17 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the application of liquid biofuels to internal combustion (IC) engines. Biofuels are one of the most promising renewable and sustainable energy sources. Particularly, liquid biofuels obtained from biomass could become a valid alternative to the use of fossil fuels in the light of increasingly stringent environmental constraints. In this book, the discussion is limited to liquid biofuels obtained from triglycerides and lignocellulose among the many different kinds of biomass. Several liquid biofuels from triglycerides, straight vegetable oil, biodiesel produced from inedible vegetable oil, hydrotreated vegetable oil, and pyrolytic oil have been selected for discussion, as well as biofuels from lignocellulose bio-oil, alcohols such as methanol, ethanol and butanol, and biomass-to-liquids diesel. This book includes three chapters on the application of methanol, ethanol and butanol to advanced compression ignition (CI) engines such as LTC, HCCI, RCCI and DF modes. Further, the application of other higher alcohols and other drop-in fuels such as DMF, MF, MTHF, and GVL are also discussed. The book will be a valuable resource for graduate students, researchers and engine designers who are interested in the application of alcohols and other biofuels in advanced CI engines, and also useful for alternative energy planners selecting biofuels for CI engines in the future.

Download or read book Driving and Engine Cycles written by Evangelos G. Giakoumis and published by Springer. This book was released on 2016-12-09 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in detail the most important driving and engine cycles used for the certification and testing of new vehicles and engines around the world. It covers chassis and engine-dynamometer cycles for passenger cars, light-duty vans, heavy-duty engines, non-road engines and motorcycles, offering detailed historical information and critical review. The book also provides detailed examples from SI and diesel engines and vehicles operating during various cycles, with a focus on how the engine behaves during transients and how this is reflected in emitted pollutants, CO2 and after-treatment systems operation. It describes the measurement methods for the testing of new vehicles and essential information on the procedure for creating a driving cycle. Lastly, it presents detailed technical specifications on the most important chassis-dynamometer cycles around the world, together with a direct comparison of those cycles.

Download or read book Advances in Compression Ignition Natural Gas Diesel Dual Fuel Engines written by Hongsheng Guo and published by Frontiers Media SA. This book was released on 2021-03-23 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biofuels from Lignocellulosic Biomass written by Michael Boot and published by John Wiley & Sons. This book was released on 2016-08-01 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts in combustion technology, this is a unique and refreshing perspective on the current biofuel discussion, presenting the latest research in this important field. The emphasis throughout this reference is on applications, industrial perspectives and economics, focusing on new classes of biofuels such as butanols, levulinates, benzenoids and others. Clearly structured, each chapter presents a new class of biofuel and discusses such topics as production pathways, fuel properties and its impact on engines. The result is a fascinating, user-oriented overview of new classes of biofuels beyond bioethanol.

Download or read book Advances in Energy and Combustion written by Ashwani K. Gupta and published by Springer Nature. This book was released on 2021-08-07 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art advances in several areas of importance in energy, combustion, power, propulsion, environment using fossil fuels and alternative fuels, and biofuels production and utilization. Availability of clean and sustainable energy is of greater importance now than ever before in all sectors of energy, power, mobility and propulsion. Written by internationally renowned experts, the latest fundamental and applied research innovations on cleaner energy production as well as utilization for a wide range of devices extending from micro scale energy conversion to hypersonic propulsion using hydrocarbon fuels are provided. The tailored technical tracks and contributions from the world renowned technical experts are portrayed in the respective field to highlight different but complementary views on fuels, combustion, power and propulsion and air toxins with special focus on current and future R&D needs and activities. The energy and environment sustainability require a multi-pronged approach involving development and utilization of new and renewable fuels, design of fuel-flexible combustion systems that can be easily operated with the new fuels, and develop novel and environmentally friendly technologies for improved utilization of all kinds of gas, liquid and solid fuels. This volume is a useful book for practicing engineers, research engineers and managers in industry and research labs, academic institutions, graduate students, and final year undergraduate students in Mechanical, Chemical, Aerospace, Energy and Environmental Engineering.

Download or read book Engine Exhaust Particulates written by Avinash Kumar Agarwal and published by Springer. This book was released on 2018-11-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comparative analysis of both diesel and gasoline engine particulates, and also of the emissions resulting from the use of alternative fuels. Written by respected experts, it offers comprehensive insights into motor vehicle particulates, their formation, composition, location, measurement, characterisation and toxicology. It also addresses exhaust-gas treatment and legal, measurement-related and technological advancements concerning emissions. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.

Download or read book Emerging Trends in Mechanical and Industrial Engineering written by Xianguo Li and published by Springer Nature. This book was released on 2023-01-01 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select proceedings of the International Conference on Emerging Trends in Mechanical and Industrial Engineering (ICETMIE 2022). It covers the latest trends in the area of mechanical engineering. The broad topics covered in the book are engineering design, industrial and production engineering, Industry 4.0, energy and process engineering, mechatronics, control and robotics, material science, and automotive engineering. The book is useful for students, researchers, and professionals working in the various areas of mechanical engineering.

Download or read book Diesel Engines and Biodiesel Engines Technologies written by Freddie L. Inambao and published by BoD – Books on Demand. This book was released on 2022-08-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel Engines and Biodiesel Engines Technologies explores the conceptual and methodological approaches for the understanding of both diesel engines and biodiesel technologies. The book incorporates reviews of the most significant research findings in both diesel and biodiesel engine production and utilization. It presents technological interventions in biodiesel production and offers a foresight analysis of the perspectives of biodiesel as a future global commodity. It also examines the main challenges that biodiesel will have to overcome in order to play a key role in future energy systems. Furthermore, the book discusses alternative diesel fuels from oils and fats and proposes solutions to issues associated with biodiesel feedstocks, production issues, quality control, viscosity, stability, applications, emissions, and other environmental impacts.

Download or read book Alcohol as an Alternative Fuel for Internal Combustion Engines written by Pravesh Chandra Shukla and published by Springer Nature. This book was released on 2021-05-15 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: div="" This book covers different aspects related to utilization of alcohol fuels in internal combustion (IC) engines with a focus on combustion, performance and emission investigations. The focal point of this book is to present engine combustion, performance and emission characteristics of IC engines fueled by alcohol blended fuels such as methanol, ethanol and butanol. The contents also highlight the importance of alcohol fuel for reducing emission levels. Possibility of alcohol fuels for marine applications has also been discussed. This book is a useful guide for researchers, academics and scientists. ^

Download or read book Higher Alcohols Production Platforms written by Hamid Amiri and published by Elsevier. This book was released on 2023-09-27 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Higher Alcohols Production Platforms: From Strain Development to Process Design comprehensively covers the production of higher alcohols, from the fundamentals to the latest research. Bringing together experts from industry and academia, the book sheds light on the practical aspects of higher alcohol production and offers a roadmap for researchers to follow. In addition to the fundamentals of higher alcohol production, readers are presented with detailed information on up and downstream processes, including microbial processes and the various production pathways available. A discussion of metabolic pathways has a dedicated chapter, as do C2, C3-C8, and C4 sugar fermentation platforms. A lifecycle assessment is also presented, addressing the energy, environmental, social and economic factors in the sustainability of higher alcohol production. Readers will find this to be a unique and comprehensive reference on the production of higher alcohols that will be of interest to students, researchers and industry professionals involved in bioenergy and renewable energy, and more. - Provides comprehensive coverage of the energy, environmental and economic aspects of higher alcohols biofuels - Presents a rational basis for assessing alcoholic products that can be used as a roadmap for their further developments - Analyzes and synthesizes the latest research and developments on the production of higher alcohols as biofuels for audiences in academia and industry

Download or read book Renewable Fuels for Sustainable Mobility written by Pravesh Chandra Shukla and published by Springer Nature. This book was released on 2023-05-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the use of renewable fuels for clean transportation and its applications on internal combustion engines. The contents focus on the key aspects of fuel production processes and its impact on various segments of the transportation sector and for sustainable mobility. Several kinds of fuels are assessed such as biofuels, alcohols, and hydrogen, and their effects on the combustion process are characterized by application. This volume will be of use to those working in academia and industry as well as energy experts and policy makers.

Download or read book Advances in Environmental Economic and Social Assessment of Energy Systems written by Diego Iribarren and published by MDPI. This book was released on 2020-12-07 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall energy sector calls for a transformation from a fossil-based system to a low-carbon one. At a technology level, significant efforts have been made to provide energy solutions that contribute to a sustainable energy system. However, the actual suitability of these solutions is often not checked. In this sense, the assessment of energy systems from a life-cycle perspective is of paramount importance when it comes to effectively planning the energy sector. While environmental issues are commonly addressed through the use of the Life Cycle Assessment (LCA) methodology, the comprehensive evaluation of the economic and social aspects of energy systems often remains ignored or underdeveloped. This book consists of a set of scientific works addressing the analysis of energy systems from a (life-cycle) technical, economic, environmental and/or social standpoint. Case studies at and beyond the technology level are included, some of them involving a combination of life cycle and non-life cycle approaches for the thorough evaluation of energy systems under the umbrella of sustainability.

Download or read book Advanced Technologies in Flow Dynamics and Combustion in Propulsion and Power written by Lei Luo and published by Frontiers Media SA. This book was released on 2022-08-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advancement in Oxygenated Fuels for Sustainable Development written by Niraj Kumar and published by Elsevier. This book was released on 2022-11-09 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Oxygenated Fuels for Sustainable Development: Feedstocks and Precursors for Catalysts Synthesis provides a roadmap to the sustainable implementation of oxygenated fuels in internal combustion engines through sustainable production, smart distribution and effective utilization. Focusing on the sustainability of feedstocks, the book assesses availability, emissions impact and reduction potential, and biodiversity and land utilization impact. Existing technologies and supply chains are reviewed, and recommendations are provided on how to sustainably implement or update these technologies, including for rural communities. Furthermore, effective supply and distribution network designs are provided alongside methods for monitoring and assessing their sustainability, accounting for social, economic, environmental and ecological factors. This book guides readers through every aspect of the production and commercialization of sustainable oxygenated fuels for internal combustion engines and their implementation across the global transport industry. - Provides multilevel perspectives on how to facilitate the sustainable production of oxygenated fuel and develop new indices for measuring the effectiveness and sustainability of implementation - Recommends a framework and criteria for assessing the suitability, sustainability, and environmental benefits of oxygenated biofuels - Describes the fuel properties of all oxygenated fuels and their performance in unmodified and enhanced CI and SI engines

Download or read book Advanced Biofuels written by Kalam Abul Azad and published by Woodhead Publishing. This book was released on 2019-06-09 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Biofuels: Applications, Technologies, and Environmental Sustainability presents recent developments and applications of biofuels in the field of internal combustion engines, with a primary focus on the recent approaches of biodiesel applications, low emission alternative fuels, and environmental sustainability. Editors Dr. Azad and Dr. Rasul, along with their team of expert contributors, combine a collection of extensive experimental investigations on engine performance and emissions and combustion phenomena using different types of oxygenated fuel with in-depth research on fuel applications, an analysis of available technologies and resources, energy efficiency improvement methods, and applications of oxygenated fuel for the sustainable environment. Academics, researchers, engineers and technologists will develop a greater understanding of the relevant concepts and solutions to the global issues related to achieving alternative energy application for future energy security, as well as environmental sustainability in medium and large-scale industries. - Fills a gap in the literature on alternative fuel applications with in-depth research and experimental investigations of different approaches, technologies and applications - Considers the important issue of sustainability using case studies to deepen understanding - Includes energy security within various industries, including aviation and transport

Download or read book Complementary Resources for Tomorrow written by Ahmad Vasel-Be-Hagh and published by Springer Nature. This book was released on 2020-03-06 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together the state-of-the-art in energy and resources research. It covers wind, solar, hydro and geothermal energy, as well as more conventional power generation technologies, such as internal combustion engines. Related areas of research such as the environmental sciences, carbon dioxide emissions, and energy storage are also addressed.