Download or read book Low speed Aerodynamic Characteristics of a 13 Percent Thick Medium Speed Airfoil Designed for General Aviation Applications written by R. J. McGhee and published by . This book was released on 1979 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low speed Aerodynamic Characteristics of a 13 percent thick Airfoil Section Designed for General Aviation Applications written by Robert J. McGhee and published by . This book was released on 1977 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low speed Aerodynamic Characteristics of a 17 percent thick Medium Speed Airfoil Designed for General Aviation Applications written by Robert J. McGhee and published by . This book was released on 1980 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind tunnel tests were conducted to determine the low speed two dimensional aerodynamic characteristics of a 17 percent thick medium speed airfoil (MS(1)-0317) designed for general aviation applications. The results were compared with data for the 17 percent thick low speed airfoil (LS(1)-0417) and the 13 percent thick medium speed airfoil (MS(1)-0313). Theoretical predictions of the drag rise characteristics of this airfoil are also provided. The tests were conducted in the Langley low turbulence pressure tunnel over a Mach number range from 0.10 to 0.32, a chord Reynolds number range from 2 million to 12 million, and an angle of attack range from about -8 to 20 deg.
Download or read book Low speed Aerodynamic Characteristics of a 17 percent thick Airfoil Section Designed for General Aviation Applications written by Robert J. McGhee and published by . This book was released on 1973 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: "An investigation was conducted in the Langley low-turbulence pressure tunnel to determine the low-speed two-dimensional aerodynamic characteristics of a 17-percent thick airfoil designed for general aviation applications. The results are compared with a typical older NACA 65 series airfoil section. Also, a comparison between experimental data and predictions, based on a theoretical method for calculating the viscous flow about the airfoil, is presented. The tests were conducted over a Mach number range from 0.10 to 0.28 and an angle-of-attack range from -10° to 24°. Reynolds numbers, based on the airfoil chord, were varied from about 2.0x106 to 20.0x106. The results of the investigation indicate that maximum section lift coefficients increased rapidly at Reynolds numbers from about 2.0x106 to 6.0x106 and attained values greater than 2.0 for the plain airfoil and greater than 3.0 with a 20-percent-chord split flap deflected 60°. Stall characteristics were generally gradual and of the trailing-edge type either with or without the split flap. At a lift coefficient of 1.0 (climb condition) the section lift-drag ratio increased from about 65 to 85 as the Reynolds number increased from about 2.0x106 to 6.0x106. Maximum section lift coefficients were about 30 percent greater than that of a typical older NACA 65 series airfoil section and the section lift-drag ratio at a lift coefficient of 0.90 was about 50 percent greater. Agreement of experimental results with predictions based on a theoretical method which included viscous effects was good for the pressure distributions as long as no boundary-layer flow separation was present, but the theoretical method predicted drag values greatly in excess of the measured values."--Page 1
Download or read book Low speed Aerodynamic Characteristics of a 16 percent Thick Variable geometry Airfoil Designed for General Aviation Applications written by Richard W. Barnwell and published by . This book was released on 1978 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low speed Aerodynamic Characteristics of a 16 percent thick Variable geometry Airfoil Designed for General Aviation Applications written by Richard W. Barnwell and published by . This book was released on 1978 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Paper written by and published by . This book was released on 1990 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Thickness on the Aerodynamic Characteristics of an Initial Low speed Family of Airfoils for General Aviation Applications written by Robert J. McGhee and published by . This book was released on 1976 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by and published by . This book was released on 1977 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Computational Aerodynamics written by Russell M. Cummings and published by Cambridge University Press. This book was released on 2015-04-27 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: This computational aerodynamics textbook is written at the undergraduate level, based on years of teaching focused on developing the engineering skills required to become an intelligent user of aerodynamic codes. This is done by taking advantage of CA codes that are now available and doing projects to learn the basic numerical and aerodynamic concepts required. This book includes a number of unique features to make studying computational aerodynamics more enjoyable. These include: • The computer programs used in the book's projects are all open source and accessible to students and practicing engineers alike on the book's website, www.cambridge.org/aerodynamics. The site includes access to images, movies, programs, and more • The computational aerodynamics concepts are given relevance by CA Concept Boxes integrated into the chapters to provide realistic asides to the concepts • Readers can see fluids in motion with the Flow Visualization Boxes carefully integrated into the text.
Download or read book Advances in Turbulence VI written by S. Gavrilakis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Turbulence VI presents an update on the state of turbulence research with some bias towards research in Europe, since it represents an almost complete collection of the paper presentations at the Sixth European Turbulence Conference, sponsored by EUROMECH, ERCOFTAC and COST, and held at the Swiss Federal Institute of Technology in Lausanne, July 2-5, 1996. The problem of transition, together with the structural description of turbulence, and the scaling laws of fully developed turbulence have continued to receive most attention by the research community and much progress has been made since the last European Turbulence Conference in 1994. The volume is thus geared towards specialists in the area of flow turbulence who could not attend the conference, as well as anybody who wishes quickly to assess the most active current research areas and the groups associated with them.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Scientific and Technical Publications written by and published by . This book was released on 1987 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis of Subsonic Airplane Design written by E. Torenbeek and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the education of aeronautical engineers at Delft University of Technology started in 1940 under tae inspiring leadership of Professor H.J. van der Maas, much emphasis has been placed on the design of aircraft as part of the student's curriculum. Not only is aircraft design an optional subject for thesis work, but every aeronautical student has to carry out a preliminary airplane design in the course of his study. The main purpose of this preliminary design work is to enable the student to synthesize the knowledge ob tained separately in courses on aerodynamics, aircraft performances, stability and con trol, aircraft structures, etc. The student's exercises in preliminary design have been directed through the years by a number of staff members of the Department of Aerospace Engineering in Delft. The author of this book, Mr. E. Torenbeek, has made a large contribution to this part of the study programme for many years. Not only has he acquired vast experience in teaching airplane design at university level, but he has also been deeply involved in design-oriented re search, e.g. developing rational design methods and systematizing design information. I am very pleased that this wealth of experience, methods and data is now presented in this book.
Download or read book ESDU Engineering Sciences Data written by and published by . This book was released on 1991 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Aircraft Design written by Egbert Torenbeek and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the overall appearance of modern airliners has not changed a lot since the introduction of jetliners in the 1950s, their safety, efficiency and environmental friendliness have improved considerably. Main contributors to this have been gas turbine engine technology, advanced materials, computational aerodynamics, advanced structural analysis and on-board systems. Since aircraft design became a highly multidisciplinary activity, the development of multidisciplinary optimization (MDO) has become a popular new discipline. Despite this, the application of MDO during the conceptual design phase is not yet widespread. Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes presents a quasi-analytical optimization approach based on a concise set of sizing equations. Objectives are aerodynamic efficiency, mission fuel, empty weight and maximum takeoff weight. Independent design variables studied include design cruise altitude, wing area and span and thrust or power loading. Principal features of integrated concepts such as the blended wing and body and highly non-planar wings are also covered. The quasi-analytical approach enables designers to compare the results of high-fidelity MDO optimization with lower-fidelity methods which need far less computational effort. Another advantage to this approach is that it can provide answers to “what if” questions rapidly and with little computational cost. Key features: Presents a new fundamental vision on conceptual airplane design optimization Provides an overview of advanced technologies for propulsion and reducing aerodynamic drag Offers insight into the derivation of design sensitivity information Emphasizes design based on first principles Considers pros and cons of innovative configurations Reconsiders optimum cruise performance at transonic Mach numbers Advanced Aircraft Design: Conceptual Design, Analysis and Optimization of Subsonic Civil Airplanes advances understanding of the initial optimization of civil airplanes and is a must-have reference for aerospace engineering students, applied researchers, aircraft design engineers and analysts.
Download or read book Aerodynamics Aeronautics and Flight Mechanics written by Barnes W. McCormick and published by John Wiley & Sons. This book was released on 1994-09-28 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Edition of the Most Effective Text/Reference in the Field! Aerodynamics, Aeronautics, and Flight Mechanics, Second Edition Barnes W. McCormick, Pennsylvania State University 57506-2 When the first edition of Aerodynamics, Aeronautics, and Flight Mechanics was published, it quickly became one of the most important teaching and reference tools in the field. Not only did generations of students learn from it, they continue to use it on the job-the first edition remains one of the most well-thumbed guides you'll find in an airplane company. Now this classic text/reference is available in a bold new edition. All new material and the interweaving of the computer throughout make the Second Edition even more practical and current than before! A New Edition as Complete and Applied as the First Both analytical and applied in nature, Aerodynamics, Aeronautics, and Flight Mechanics presents all necessary derivations to understand basic principles and then applies this material to specific examples. You'll find complete coverage of the full range of topics, from aerodynamics to propulsion to performance to stability and control. Plus, the new Second Edition boasts the same careful integration of concepts that was an acclaimed feature of the previous edition. For example, Chapters 9, 10, and 11 give a fully integrated presentation of static, dynamic, and automatic stability and control. These three chapters form the basis of a complete course on stability and control. New Features You'll Find in the Second Edition * A new chapter on helicopter and V/STOL aircraft- introduces a phase of aerodynamics not covered in most current texts * Even more material than the previous edition, including coverage of stealth airplanes and delta wings * Extensive use of the computer throughout- each chapter now contains several computer exercises * A computer disk with programs written by the author is available
