Download or read book Low power HF Microelectronics written by Gerson A. S. Machado and published by IET. This book was released on 1996 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together innovative modelling, simulation and design techniques in CMOS, SOI, GaAs and BJT to achieve successful high-yield manufacture for low-power, high-speed and reliable-by-design analogue and mixed-mode integrated systems.
Download or read book Low power HF Microelectronics written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is organised in four parts, with generous contributions covering: (i) process/TCAD technology; (ii) device modelling/characterisation and circuit simulation; (iii) reliability and testability; (iv) analog and digital circuit and system design. In modern low-power HF microelectronics, the interaction needed between these parts to achieve the desired system performances means that frequently there will be an alliance and/or overlap among them. It is fundamental to high-yield successful manufacturing to relate in a quantitative manner the sensitivity of the electrical performance of the final devices and/or circuits to variations in structural parameters, doping profiles, layout, thermal effects and design
Download or read book Low Power Design in Deep Submicron Electronics written by W. Nebel and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Power Design in Deep Submicron Electronics deals with the different aspects of low power design for deep submicron electronics at all levels of abstraction from system level to circuit level and technology. Its objective is to guide industrial and academic engineers and researchers in the selection of methods, technologies and tools and to provide a baseline for further developments. Furthermore the book has been written to serve as a textbook for postgraduate student courses. In order to achieve both goals, it is structured into different chapters each of which addresses a different phase of the design, a particular level of abstraction, a unique design style or technology. These design-related chapters are amended by motivations in Chapter 2, which presents visions both of future low power applications and technology advancements, and by some advanced case studies in Chapter 9. From the Foreword: `... This global nature of design for low power was well understood by Wolfgang Nebel and Jean Mermet when organizing the NATO workshop which is the origin of the book. They invited the best experts in the field to cover all aspects of low power design. As a result the chapters in this book are covering deep-submicron CMOS digital system design for low power in a systematic way from process technology all the way up to software design and embedded software systems. Low Power Design in Deep Submicron Electronics is an excellent guide for the practicing engineer, the researcher and the student interested in this crucial aspect of actual CMOS design. It contains about a thousand references to all aspects of the recent five years of feverish activity in this exciting aspect of design.' Hugo de Man Professor, K.U. Leuven, Belgium Senior Research Fellow, IMEC, Belgium
Download or read book Design and Modeling of Low Power VLSI Systems written by Sharma, Manoj and published by IGI Global. This book was released on 2016-06-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Large Scale Integration (VLSI) Systems refer to the latest development in computer microchips which are created by integrating hundreds of thousands of transistors into one chip. Emerging research in this area has the potential to uncover further applications for VSLI technologies in addition to system advancements. Design and Modeling of Low Power VLSI Systems analyzes various traditional and modern low power techniques for integrated circuit design in addition to the limiting factors of existing techniques and methods for optimization. Through a research-based discussion of the technicalities involved in the VLSI hardware development process cycle, this book is a useful resource for researchers, engineers, and graduate-level students in computer science and engineering.
Download or read book Low Power and Low Voltage Circuit Design with the FGMOS Transistor written by Esther Rodriguez-Villegas and published by IET. This book was released on 2006-10-02 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivated by consumer demand for smaller, more portable electronic devices that offer more features and operate for longer on their existing battery packs, cutting edge electronic circuits need to be ever more power efficient. For the circuit designer, this requires an understanding of the latest low voltage and low power (LV/LP) techniques, one of the most promising of which makes use of the floating gate MOS (FGMOS) transistor.
Download or read book Adaptive Low Power Circuits for Wireless Communications written by Aleksandar Tasic and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a billion – soon to be two billion - cellular telephones in circulation, the next challenge is to make cellular radio functions adaptive to their environment. This book provides a comprehensive theoretical framework for optimizing performance, discussing joint optimization of Noise Figure and Input Intercept Point in receiver systems. Also examined are original techniques to optimize voltage controlled oscillators and low-noise amplifiers, minimizing power consumption while maintaining adequate system performance.
Download or read book Generalized Low Voltage Circuit Techniques for Very High Speed Time Interleaved Analog to Digital Converters written by Sai-Weng Sin and published by Springer Science & Business Media. This book was released on 2010-09-29 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog-to-Digital Converters (ADCs) play an important role in most modern signal processing and wireless communication systems where extensive signal manipulation is necessary to be performed by complicated digital signal processing (DSP) circuitry. This trend also creates the possibility of fabricating all functional blocks of a system in a single chip (System On Chip - SoC), with great reductions in cost, chip area and power consumption. However, this tendency places an increasing challenge, in terms of speed, resolution, power consumption, and noise performance, in the design of the front-end ADC which is usually the bottleneck of the whole system, especially under the unavoidable low supply-voltage imposed by technology scaling, as well as the requirement of battery operated portable devices. Generalized Low-Voltage Circuit Techniques for Very High-Speed Time-Interleaved Analog-to-Digital Converters will present new techniques tailored for low-voltage and high-speed Switched-Capacitor (SC) ADC with various design-specific considerations.
Download or read book The Computer Engineering Handbook written by Vojin G. Oklobdzija and published by CRC Press. This book was released on 2001-12-26 with total page 1409 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is arguably no field in greater need of a comprehensive handbook than computer engineering. The unparalleled rate of technological advancement, the explosion of computer applications, and the now-in-progress migration to a wireless world have made it difficult for engineers to keep up with all the developments in specialties outside their own
Download or read book Silicon on Insulator Technology written by J.-P. Colinge and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon-on-Insulator Technology: Materials to VLSI, 2nd Edition describes the different facets of SOI technology. SOI chips are now commercially available and SOI wafer manufacturers have gone public. SOI has finally made it out of the academic world and is now a big concern for every major semiconductor company. SOI technology has indeed deserved serious recognition: high-temperature (400°C), extremely rad-hard (500 Mrad(Si)), high-density (16 Mb, 0.9-volt DRAM), high-speed (several GHz) and low-voltage (0.5 V) SOI circuits have been demonstrated. Strategic choices in favor of the use of SOI for low-voltage, low-power portable systems have been made by several major semiconductor manufacturers. Silicon-on-Insulator Technology: Materials to VLSI, 2nd Edition presents a complete and state-of-the-art review of SOI materials, devices and circuits. SOI fabrication and characterization techniques, SOI device processing, the physics of the SOI MOSFET as well as that of SOI other devices, and the performances of SOI circuits are discussed in detail. The SOI specialist will find this book invaluable as a source of compiled references covering the different aspects of SOI technology. For the non-specialist, the book serves as an excellent introduction to the topic with detailed, yet simple and clear explanations. Silicon-on-Insulator Technology: Materials to VLSI, 2nd Edition is recommended for use as a textbook for classes on semiconductor device processing and physics. The level of the book is appropriate for teaching at both the undergraduate and graduate levels. Silicon-on-Insulator Technology: Materials to VLSI, 2nd Edition includes the new materials, devices, and circuit concepts which have been devised since the publication of the first edition. The circuit sections, in particular, have been updated to present the performances of SOI devices for low-voltage, low-power applications, as well as for high-temperature, smart-power, and DRAM applications. The other sections, such as those describing SOI materials, the physics of the SOI MOSFET and other devices have been updated to present the state of the art in SOI technology.
Download or read book Digital Design and Fabrication written by Vojin G. Oklobdzija and published by CRC Press. This book was released on 2017-12-19 with total page 1165 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to tremendous growth and new technologies in the semiconductor industry, this volume is organized into five, information-rich sections. Digital Design and Fabrication surveys the latest advances in computer architecture and design as well as the technologies used to manufacture and test them. Featuring contributions from leading experts, the book also includes a new section on memory and storage in addition to a new chapter on nonvolatile memory technologies. Developing advanced concepts, this sharply focused book— Describes new technologies that have become driving factors for the electronic industry Includes new information on semiconductor memory circuits, whose development best illustrates the phenomenal progress encountered by the fabrication and technology sector Contains a section dedicated to issues related to system power consumption Describes reliability and testability of computer systems Pinpoints trends and state-of-the-art advances in fabrication and CMOS technologies Describes performance evaluation measures, which are the bottom line from the user’s point of view Discusses design techniques used to create modern computer systems, including high-speed computer arithmetic and high-frequency design, timing and clocking, and PLL and DLL design
Download or read book Analog Circuit Design written by Willy M.C. Sansen and published by Springer Science & Business Media. This book was released on 1999-10-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Analog Circuit Design concentrates on three topics: (X)DSL and other communication systems; RF MOST models; and integrated filters and oscillators. The book comprises five chapters on the first topic with six each on the other two, all written by internationally recognized experts. They are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I: (X)DSL and other Communication Systems presents some examples of recent improved modem techniques which have resulted in much higher transmission speeds over the local telephone network. It also presents components for the implementation of different standards. Part II: RF MOST Models investigates the state of the art in RF MOST models. It compares the existing BSIM3v3, Philips' Model 9 and the EKV model with respect to their capability to accurately predict GHz performance with submicron CMOST technologies. It shows how it has now become quite feasible to model a MOST at very high frequencies, giving rise to an increased use of MOST technologies in RF applications. Part III: Integrated Filters and Oscillators illustrates how the increasing use of communication tools goes hand-in-hand with the design of analog filters and oscillators with greater flexibility and higher bandwidth.
Download or read book Radio Frequency Microelectronic Circuits for Telecommunication Applications written by Yannis E. Papananos and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-Frequency Microelectronic Circuits for Telecommunication Applications covers the design issues of radio-frequency microelectronic circuits for telecommunication applications with emphasis on devices and circuit-level design. It uses a large number of real examples from industrial design as a vehicle both to teach the principles and to ensure relevance starting from device level modeling to basic RF microelectronic circuit cell design. Modeling for high-frequency operation of both active and passive integrated devices is covered starting from the bipolar transistor to the MOS transistor to the modeling of integrated spiral inductors, resistors, capacitors, varactors and package parasitics structures. A chapter is also devoted to the presentation of the basic definitions and terminology used in RF IC design. The book continues with the presentation of the principal building blocks of an integrated RF front-end, namely, the LNA, the mixer, the VCO and integrated filters. Design paradigms are provided classified on the technology used in each case: pure bipolar, CMOS, BiCMOS or SiGe. Radio-Frequency Microelectronic Circuits for Telecommunication Applications is essential reading for all researchers, practising engineers and designers working in RF electronics. It is also a reference for use in advanced undergraduate or graduate courses in the same field.
Download or read book Circuits and Systems for Wireless Communications written by Markus Helfenstein and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I: RF System Integration. 1. RF System Integration; C. Toumazou. 2. RF System Board Level Integration for Mobile Phones; G.J. Aspin. 3. Integration of RF Systems on a Chip; P.J. Mole. 4. Towards the Full Integration of Wireless Front-End Circuits; M. Steyaert. 5. GSM Transceiver Front-End Circuits in 0.25 mum CMOS; Q. Huang, et al. Part II: RF Front-End Circuits. 6. RF Front-End Circuits; Q. Huang. 7. Phase-Noise-to-Carrier Ratio in LC Oscillators; Q. Huang. 8. Design Study of a 900 MHz/1.8 GHz CMOS Transceiver for Dual-Band Applications; B. Razavi. 9. Integrated Wireless Transc.
Download or read book Design of Very High Frequency Multirate Switched Capacitor Circuits written by Ben U Seng Pan and published by Springer Science & Business Media. This book was released on 2006-07-02 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Very High-Frequency Multirate Switched-Capacitor Circuits presents the theory and the corresponding CMOS implementation of the novel multirate sampled-data analog interpolation technique which has its great potential on very high-frequency analog frond-end filtering due to its inherent dual advantage of reducing the speed of data-converters and DSP core together with the specification relaxation of the post continuous-time filtering. This technique completely eliminates the traditional phenomenon of sampled-and-hold frequency-shaping at the lower input sampling rate. Also, in order to tackle physical IC imperfections at very high frequency, the state-of-the-art circuit design and layout techniques for high-speed Switched-Capacitor (SC) circuits are comprehensively discussed: -Optimum circuit architecture tradeoff analysis -Simple speed and power trade-off analysis of active elements -High-order filtering response accuracy with respect to capacitor-ratio mismatches -Time-interleaved effect with respect to gain and offset mismatch -Time-interleaved effect with respect to timing-skew and random jitter with non-uniformly holding -Stage noise analysis and allocation scheme -Substrate and supply noise reduction -Gain-and offset-compensation techniques -High-bandwidth low-power amplifier design and layout -Very low timing-skew multiphase generation Two tailor-made optimum design examples in CMOS are presented. The first one achieves a 3-stage 8-fold SC interpolating filter with 5.5MHz bandwidth and 108MHz output sampling rate for a NTSC/PAL CCIR 601 digital video at 3 V. Another is a 15-tap 57MHz SC FIR bandpass interpolating filter with 4-fold sampling rate increase to 320MHz and the first-time embedded frequency band up-translation for DDFS system at 2.5V. The corresponding chip prototype achieves so far the highest operating frequency, highest filter order and highest center frequency with highest dynamic range under the lowest supply voltage when compared to the previously reported high-frequency SC filters in CMOS.
Download or read book Design of System on a Chip written by Ricardo Reis and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of System on a Chip is the first of two volumes addressing the design challenges associated with new generations of the semiconductor technology. The various chapters are the compilations of tutorials presented at workshops in Brazil in the recent years by prominent authors from all over the world. In particular the first book deals with components and circuits. Device models have to satisfy the conditions to be computationally economical in addition to be accurate and to scale over various generations of technology. In addition the book addresses issues of the parasitic behavior of deep sub-micron components, such as parameter variations and sub-threshold effects. Furthermore various authors deal with items like mixed signal components and memories. We wind up with an exposition of the technology problems to be solved if our community wants to maintain the pace of the "International Technology Roadmap for Semiconductors" (ITRS).
Download or read book Physics of Semiconductor Devices written by J.-P. Colinge and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Semiconductor Devices covers both basic classic topics such as energy band theory and the gradual-channel model of the MOSFET as well as advanced concepts and devices such as MOSFET short-channel effects, low-dimensional devices and single-electron transistors. Concepts are introduced to the reader in a simple way, often using comparisons to everyday-life experiences such as simple fluid mechanics. They are then explained in depth and mathematical developments are fully described. Physics of Semiconductor Devices contains a list of problems that can be used as homework assignments or can be solved in class to exemplify the theory. Many of these problems make use of Matlab and are aimed at illustrating theoretical concepts in a graphical manner.
Download or read book Silicon on Insulator Technology Materials to VLSI written by J.-P. Colinge and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon-on-Insulator Technology: Materials to VLSI, Third Edition, retraces the evolution of SOI materials, devices and circuits over a period of roughly twenty years. Twenty years of progress, research and development during which SOI material fabrication techniques have been born and abandoned, devices have been invented and forgotten, but, most importantly, twenty years during which SOI Technology has little by little proven it could outperform bulk silicon in every possible way. The turn of the century turned out to be a milestone for the semiconductor industry, as high-quality SOI wafers suddenly became available in large quantities. From then on, it took only a few years to witness the use of SOI technology in a wealth of applications ranging from audio amplifiers and wristwatches to 64-bit microprocessors. This book presents a complete and state-of-the-art review of SOI materials, devices and circuits. SOI fabrication and characterization techniques, SOI CMOS processing, and the physics of the SOI MOSFET receive an in-depth analysis.
