Download or read book Low Power Hardware Synthesis from Concurrent Action Oriented Specifications written by Gaurav Singh and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human lives are getting increasingly entangled with technology, especially comp- ing and electronics. At each step we take, especially in a developing world, we are dependent on various gadgets such as cell phones, handheld PDAs, netbooks, me- cal prosthetic devices, and medical measurement devices (e.g., blood pressure m- itors, glucometers). Two important design constraints for such consumer electronics are their form factor and battery life. This translates to the requirements of reduction in the die area and reduced power consumption for the semiconductor chips that go inside these gadgets. Performance is also important, as increasingly sophisticated applications run on these devices, and many of them require fast response time. The form factor of such electronics goods depends not only on the overall area of the chips inside them but also on the packaging, which depends on thermal ch- acteristics. Thermal characteristics in turn depend on peak power signature of the chips. As a result, while the overall energy usage reduction increases battery life, peak power reduction in?uences the form factor. One more important aspect of these electronic equipments is that every 6 months or so, a newer feature needs to be added to keep ahead of the market competition, and hence new designs have to be completed with these new features, better form factor, battery life, and performance every few months. This extreme pressure on the time to market is another force that drives the innovations in design automation of semiconductor chips.
Download or read book Low Power Design with High Level Power Estimation and Power Aware Synthesis written by Sumit Ahuja and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel research techniques, algorithms, methodologies and experimental results for high level power estimation and power aware high-level synthesis. Readers will learn to apply such techniques to enable design flows resulting in shorter time to market and successful low power ASIC/FPGA design.
Download or read book Model Checking Software written by Klaus Havelund and published by Springer. This book was released on 2008-08-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International SPIN workshop on Model Checking Software, SPIN 2008, held in Los Angeles, CA, USA, in August 2008. The 17 revised full papers presented together with 1 tool paper and 4 invited talks were carefully reviewed and selected from 41 submissions. The main focus of the workshop series is software systems, including models and programs. The papers cover theoretical and algorithmic foundations as well as tools for software model checking and foster interactions and exchanges of ideas with related areas in software engineering, such as static analysis, dynamic analysis, and testing.
Download or read book Readings in Hardware Software Co Design written by Giovanni De Micheli and published by Morgan Kaufmann. This book was released on 2002 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title serves as an introduction ans reference for the field, with the papers that have shaped the hardware/software co-design since its inception in the early 90s.
Download or read book Embedded Systems Specification and Design Languages written by Eugenio Villar and published by Springer Science & Business Media. This book was released on 2008-05-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the latest contribution to the Chip Design Languages series and it consists of selected papers presented at the Forum on Specifications and Design Languages (FDL'07), in September 2007. The book represents the state-of-the-art in research and practice, and it identifies new research directions. It highlights the role of specification and modelling languages, and presents practical experiences with specification and modelling languages
Download or read book High Level Synthesis written by Philippe Coussy and published by Springer Science & Business Media. This book was released on 2008-08-01 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an excellent collection of contributions addressing different aspects of high-level synthesis from both industry and academia. It includes an overview of available EDA tool solutions and their applicability to design problems.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1996 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Verification written by Hana Chockler and published by Springer. This book was released on 2018-07-21 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access two-volume set LNCS 10980 and 10981 constitutes the refereed proceedings of the 30th International Conference on Computer Aided Verification, CAV 2018, held in Oxford, UK, in July 2018. The 52 full and 13 tool papers presented together with 3 invited papers and 2 tutorials were carefully reviewed and selected from 215 submissions. The papers cover a wide range of topics and techniques, from algorithmic and logical foundations of verification to practical applications in distributed, networked, cyber-physical, and autonomous systems. They are organized in topical sections on model checking, program analysis using polyhedra, synthesis, learning, runtime verification, hybrid and timed systems, tools, probabilistic systems, static analysis, theory and security, SAT, SMT and decisions procedures, concurrency, and CPS, hardware, industrial applications.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concurrent Hardware written by Michael Kishinevsky and published by Wiley. This book was released on 1993-12-08 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the theory and design of self-timed systems. The logical design of self-timed circuits (STCs) provides a focal point for, on the one hand, those interested in formal models of parallel computation and, on the other, hardware designers. The approach taken by the authors is to address general issues concerning the very nature of concurrency, as well as to demonstrate the particular features of asynchronous design. The book presents formal models of the specification and verification of parallel processes and describes methods for self-timed circuit synthesis and analysis. It is augmented by a demonstration-version of a CAD system called FORCAGE which consists of subsystems of behavior verification, self-timed circuit analysis and synthesis. The system can be run on a PC.
Download or read book Arithmetic Optimization Techniques for Hardware and Software Design written by Ryan Kastner and published by Cambridge University Press. This book was released on 2010-05-06 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Obtain better system performance, lower energy consumption, and avoid hand-coding arithmetic functions with this concise guide to automated optimization techniques for hardware and software design. High-level compiler optimizations and high-speed architectures for implementing FIR filters are covered, which can improve performance in communications, signal processing, computer graphics, and cryptography. Clearly explained algorithms and illustrative examples throughout make it easy to understand the techniques and write software for their implementation. Background information on the synthesis of arithmetic expressions and computer arithmetic is also included, making the book ideal for newcomers to the subject. This is an invaluable resource for researchers, professionals, and graduate students working in system level design and automation, compilers, and VLSI CAD.
Download or read book Proceedings written by and published by . This book was released on 1997 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Core Embedded Systems written by Georgios Kornaros and published by CRC Press. This book was released on 2018-10-08 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details a real-world product that applies a cutting-edge multi-core architecture Increasingly demanding modern applications—such as those used in telecommunications networking and real-time processing of audio, video, and multimedia streams—require multiple processors to achieve computational performance at the rate of a few giga-operations per second. This necessity for speed and manageable power consumption makes it likely that the next generation of embedded processing systems will include hundreds of cores, while being increasingly programmable, blending processors and configurable hardware in a power-efficient manner. Multi-Core Embedded Systems presents a variety of perspectives that elucidate the technical challenges associated with such increased integration of homogeneous (processors) and heterogeneous multiple cores. It offers an analysis that industry engineers and professionals will need to understand the physical details of both software and hardware in embedded architectures, as well as their limitations and potential for future growth. Discusses the available programming models spread across different abstraction levels The book begins with an overview of the evolution of multiprocessor architectures for embedded applications and discusses techniques for autonomous power management of system-level parameters. It addresses the use of existing open-source (and free) tools originating from several application domains—such as traffic modeling, graph theory, parallel computing and network simulation. In addition, the authors cover other important topics associated with multi-core embedded systems, such as: Architectures and interconnects Embedded design methodologies Mapping of applications
Download or read book Formal Description Techniques IX written by R. Gotzhein and published by Springer. This book was released on 2016-01-09 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the combined proceedings of the latest IFIP Formal Description Techniques (FDTs) and Protocol Specification, Testing and Verification (PSTV) series. It addresses FDTs applicable to communication protocols and distributed systems, with special emphasis on standardised FDTs. It features state-of-the-art in theory, application, tools and industrialisation of formal description.
Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1990 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1904 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Verilog Hardware Description Language written by Donald Thomas and published by Springer Science & Business Media. This book was released on 2008-09-11 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: XV From the Old to the New xvii Acknowledgments xx| Verilog A Tutorial Introduction Getting Started 2 A Structural Description 2 Simulating the binaryToESeg Driver 4 Creating Ports For the Module 7 Creating a Testbench For a Module 8 Behavioral Modeling of Combinational Circuits 11 Procedural Models 12 Rules for Synthesizing Combinational Circuits 13 Procedural Modeling of Clocked Sequential Circuits 14 Modeling Finite State Machines 15 Rules for Synthesizing Sequential Systems 18 Non-Blocking Assignment ("
