Download or read book Low powder and High rate Wireless Transmission Systems for Neural Implants written by Henrique Do Carmo Miranda and published by Stanford University. This book was released on 2011 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural recording systems are fundamental to the advancement of brain-machine interfaces that can significantly improve the quality of lives of patients with neurological diseases, such as spinal cord injuries or quadriplegia. This thesis presents two newly developed wireless neural recording systems that are able to provide a high degree of usability and neural decoding accuracy. They are capable of simultaneously transmitting 32 to 96 channels of neural signals detected by an implanted neural sensor array. This work was carried out within the framework of the Hermes project and its technical design challenges will be addressed. The Hermes project is aimed at primarily developing hardware and software tools that extract neural information from the motor cortex. Those tools can enable practical prosthetic devices used to significantly ameliorate the life of patients with neurological impairments that directly affect motor functions. The first developed system, HermesD, is a 32-channel broadband transmission system using an FSK modulated carrier at 24 Mbit/s in the 3.7-4.1 GHz band. The link range extends beyond 20 m and the total power consumption is 142 mW. The HermesD system uses only COTS components and can be easily replicated. HermesD is fully operational and is currently used to transmit broadband neural data for neuroscience research in the Neural Prosthetic Systems Laboratory (NPSL) at Stanford University. HermesD is also planned as the base platform for future human trials to take place in the same laboratory. The second system that represents the next Hermes generation, HermesE, uses a novel UWB transmitter architecture implemented in a custom IC in the 65-nm CMOS technology. The transmitted signal bandwidth covers the 3.6 to 7.5 GHz frequency range. The time domain waveform is digitally programmable, allowing a very flexible control of the output spectrum to avoid interference and to allow multi-band operation. The UWB transmitter chip is part of a 96-channel broadband recording system delivering 40 Mbit/s. Its power consumption is 230 uW for a communication range of about 5 m. The antenna subsystems for these wireless recording devices presented a design challenge given the requirements for small size, large bandwidth and high efficiency. While HermesD has an operating FBW of 10%, HermesE is much more demanding in this respect, with 70% FBW, requiring unconventional antenna structures. The design techniques and performance of the antennas required to meet the specifications of both systems are also addressed in this work.
Download or read book Low powder and High rate Wireless Transmission Systems for Neural Implants written by Henrique Do Carmo Miranda and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural recording systems are fundamental to the advancement of brain-machine interfaces that can significantly improve the quality of lives of patients with neurological diseases, such as spinal cord injuries or quadriplegia. This thesis presents two newly developed wireless neural recording systems that are able to provide a high degree of usability and neural decoding accuracy. They are capable of simultaneously transmitting 32 to 96 channels of neural signals detected by an implanted neural sensor array. This work was carried out within the framework of the Hermes project and its technical design challenges will be addressed. The Hermes project is aimed at primarily developing hardware and software tools that extract neural information from the motor cortex. Those tools can enable practical prosthetic devices used to significantly ameliorate the life of patients with neurological impairments that directly affect motor functions. The first developed system, HermesD, is a 32-channel broadband transmission system using an FSK modulated carrier at 24 Mbit/s in the 3.7-4.1 GHz band. The link range extends beyond 20 m and the total power consumption is 142 mW. The HermesD system uses only COTS components and can be easily replicated. HermesD is fully operational and is currently used to transmit broadband neural data for neuroscience research in the Neural Prosthetic Systems Laboratory (NPSL) at Stanford University. HermesD is also planned as the base platform for future human trials to take place in the same laboratory. The second system that represents the next Hermes generation, HermesE, uses a novel UWB transmitter architecture implemented in a custom IC in the 65-nm CMOS technology. The transmitted signal bandwidth covers the 3.6 to 7.5 GHz frequency range. The time domain waveform is digitally programmable, allowing a very flexible control of the output spectrum to avoid interference and to allow multi-band operation. The UWB transmitter chip is part of a 96-channel broadband recording system delivering 40 Mbit/s. Its power consumption is 230 uW for a communication range of about 5 m. The antenna subsystems for these wireless recording devices presented a design challenge given the requirements for small size, large bandwidth and high efficiency. While HermesD has an operating FBW of 10%, HermesE is much more demanding in this respect, with 70% FBW, requiring unconventional antenna structures. The design techniques and performance of the antennas required to meet the specifications of both systems are also addressed in this work.
Download or read book Wireless Power Transfer and Data Communication for Neural Implants written by Gürkan Yilmaz and published by Springer. This book was released on 2017-01-01 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new circuits and systems for implantable biomedical applications targeting neural recording. The authors describe a system design adapted to conform to the requirements of an epilepsy monitoring system. Throughout the book, these requirements are reflected in terms of implant size, power consumption, and data rate. In addition to theoretical background which explains the relevant technical challenges, the authors provide practical, step-by-step solutions to these problems. Readers will gain understanding of the numerical values in such a system, enabling projections for feasibility of new projects.
Download or read book High Data rate Ultra Low power Backscatter Wireless Communication Systems for Brain computer Interfaces written by Eleftherios Kampianakis and published by . This book was released on 2019 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural interfacing is a promising technology for effectively treating a multitude of challenging clinical conditions. Recent research has demonstrated that some tetraplegic patients can control robotic limbs using a brain-computer interface (BCI), signifying the beginning of an era wherein many forms of paralysis may be treatable with a neuro-prosthesis. However, the current state of the art is bulky, tethered, and impractical for applications outside a clinical lab setting. Moreover, current wireless communication approaches for brain computer interfaces (BCI) do not meet the necessary specifications for power, size, and bandwidth. In contrast, we developed fully integrated BCIs equipped with high data-rate and low power miniaturized wireless backscatter communication systems to enable the development of autonomous brain-controlled prosthetics. First, we proposed a wireless [mu]-Power, low-noise frequency mixing approach for extending the passband frequency response of existing neural interfaces. We demonstrated the translation of a pre-recorded mouse electrocorticogram from a frequency range of 0.5 Hz to 100 Hz up to an intermediate frequency (IF) of 407 Hz, thus enabling the use of an existing integrated circuit (IC) for electrocorticography (ECoG), despite its low-frequency cutoff of 12 Hz. Subsequently, we presented a dual-band implantable BCI that integrates 47%-efficient high frequency (HF) wireless power delivery into a 5 Mb/s ultra-high frequency (UHF) backscatter communication. The implant system supports ten neural channels sampled at 26.10 kHz and four electromyography (EMG) channels sampled at 1.628 kHz and can communicate with a custom software-defined-radio-based external system with a packet error ratio (PER) that is better than 0.19%~at an implant depth of up to 3 cm. Finally, in order to enable neural plasticity experiments inside the home cages of freely behaving animals, we developed a 25 Mbps backscatter-based data uplink for Neurochip 3 using a differential quadrature phase shift keying (DQPSK) constellation. We statically collected 104 packets from 126 locations, and the system exhibited effectively 0% (PER) for all but two of the surveyed sites despite the reverberant cavity effects of the animal cage that critically impair the communication channel.
Download or read book Wireless Cortical Implantable Systems written by Vahid Majidzadeh Bafar and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless Cortical Implantable Systems examines the design for data acquisition and transmission in cortical implants. The first part of the book covers existing system level cortical implants, as well as future devices. The authors discuss the major constraints in terms of microelectronic integrations are presented. The second part of the book focuses on system-level as well as circuit and system level solutions to the development of ultra low-power and low-noise microelectronics for cortical implants. Existing solutions are presented and novel methods and solutions proposed. The third part of the book focuses on the usage of digital impulse radio ultra wide band transmission as an efficient method to transmit cortically neural recorded data at high data rate to the outside world. Original architectural and circuit and system solutions are discussed.
Download or read book Popular Science written by and published by . This book was released on 2005-09 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.
Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Tomographic Atlas of the Mouse Skeleton written by Itai A. Bab and published by Springer Science & Business Media. This book was released on 2007-12-27 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Micro-Tomographic Atlas of the Mouse Skeleton provides a unique systematic description of all calcified components of the mouse. It includes about 200 high resolution, two and three dimensional m CT images of the exterior and interiors of all bones and joints. In addition, the spatial relationship of bones within complex skeletal units is also described. The images are accompanied by detailed explanatory text, thus highlighting special features and newly reported structures. The Atlas fulfils an emerging need for a comprehensive reference to assist both trained and in-training researchers.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 1174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Energy Harvesting written by Danick Briand and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its inclusion of the fundamentals, systems and applications, this reference provides readers with the basics of micro energy conversion along with expert knowledge on system electronics and real-life microdevices. The authors address different aspects of energy harvesting at the micro scale with a focus on miniaturized and microfabricated devices. Along the way they provide an overview of the field by compiling knowledge on the design, materials development, device realization and aspects of system integration, covering emerging technologies, as well as applications in power management, energy storage, medicine and low-power system electronics. In addition, they survey the energy harvesting principles based on chemical, thermal, mechanical, as well as hybrid and nanotechnology approaches. In unparalleled detail this volume presents the complete picture -- and a peek into the future -- of micro-powered microsystems.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wireless Power Transfer written by Mohamed Zellagui and published by BoD – Books on Demand. This book was released on 2021-08-18 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless power transfer (WPT) is a promising technology used to transfer electric energy from a transmitter to a receiver wirelessly without wires through various methods and technologies using time-varying electric, magnetic, or electromagnetic fields. It is an attractive solution for many industrial applications due to its many benefits over wired connections. This book discusses the theory and practical aspects of WPT technology.
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book Clinical Case Studies for the Family Nurse Practitioner written by Leslie Neal-Boylan and published by John Wiley & Sons. This book was released on 2011-11-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clinical Case Studies for the Family Nurse Practitioner is a key resource for advanced practice nurses and graduate students seeking to test their skills in assessing, diagnosing, and managing cases in family and primary care. Composed of more than 70 cases ranging from common to unique, the book compiles years of experience from experts in the field. It is organized chronologically, presenting cases from neonatal to geriatric care in a standard approach built on the SOAP format. This includes differential diagnosis and a series of critical thinking questions ideal for self-assessment or classroom use.
Download or read book Small Antennas Miniaturization Techniques Applications written by John Volakis and published by McGraw Hill Professional. This book was released on 2009-12-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next-generation small antenna design techniques This authoritative text provides the most up-to-date methods on the theory and design of small antennas, including an extensive survey of small antenna literature published over the past several years. Written by experts at the forefront of antenna research, Small Antennas: Miniaturization Techniques & Applications begins with a detailed presentation of small antenna theory--narrowband and wideband--and progresses to small antenna design methods, such as materials and shaping approaches for multiband and wideband antennas. Generic miniaturization techniques are presented for narrowband, multiband, and wideband antennas. Two chapters devoted to metamaterials antennas and methods to achieve optimal small antennas, as well as a chapter on RFID technologies and related antennas, are included in this comprehensive volume. Coverage includes: Small antenna theory and optimal parameters Theory and limits of wideband electrically small antennas Extensive literature survey of small antenna designs Practical antenna miniaturization approaches Conformal wideband antennas based on spirals Negative refractive index (NRI) metamaterial and electromagnetic band gap (EBG) based antennas Small antennas based on magnetic photonic and degenerate band edge crystals Impedance matching for small antennas using passive and active circuits RFID antennas and technology
Download or read book Dictionary of Science and Technology written by T. C. Collocott and published by . This book was released on 1974 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt: