Download or read book Thermal Cracking in Concrete at Early Ages written by R. Springenschmid and published by CRC Press. This book was released on 1994-10-13 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Restraint and intrinsic stresses in concrete at early ages are vitally important for concrete structures which must remain free of water-permeable cracks, such as water-retaining structures, tunnel linings, locks and dams. The development of hydration heat, stiffness and strength, also the degree of restraint and, especially for high-strength concrete, non-thermal effects, are decisive for sensitivity to cracking. Determining thses stresses in the laboratory and in construction components has led to a clearer understanding of how they develop and how to optimize mix design, temperature and curing conditions. New testing equipment has enabled the effects of all the important parameters to be qualified and more reliable models for predictiong restraint stresses to be developed. Thermal Cracking in Conrete at Early Ages contains 56 contributions by leading international specialists presented at the RILEM Symposium held in October 1994 at the Technical University of Munich. It will be valuable for construction and site engineers, concrete technologists and scientists.
Download or read book Portland Cement written by G. C. Bye and published by Thomas Telford. This book was released on 1999 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Portland cement is one of the most traditional of construction materials. Rising costs of the energy required for its manufacture and the increasing interest in understanding the mechanisms of concrete deterioration, as well as the importance of optimising the use of Portland cement in high quality concrete, have continued to sustain interest in this important material. This second edition of this popular book provides an up-to-date introduction to the raw materials and manufacturing processes of Portland cement. It gives an introductory account of cement composition, manufacture, quality assessment, hydration and the resulting microstructure-physical property relationships, and some mechanisms of the chemical degradation of hardened cement paste. The book is primarily intended for students of materials sciences and graduates in pure science or engineering entering the cement or concrete industries. However anyone requiring a good clear introduction to this material will find this book provides helpful information.
Download or read book Structure and Performance of Cements Second Edition written by P. Barnes and published by CRC Press. This book was released on 2002-11-01 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing together a multinational team of authors, this second edition of Structure and Performance of Cements highlights the latest global advances in the field of cement technology. Three broad categories are covered: basic materials and methods, cement extenders, and techniques of examination. Within these categories consideration has been given to environmental issues such as the use of waste materials in cement-burning as supplementary fuels and new and improved methods of instrumentation for examining structural aspects and performance of cements. This book also covers cement production, mineralogy and hydration, as well as the mechanical properties of cement, and the corrosion and durability of cementitious systems. Special cements are included, along with calcium aluminate and blended cements together with a consideration of the role of gypsum in cements. Structure and Performance of Cements is an invaluable key reference for academics, researchers and practitioners alike.
Download or read book Concrete Under Severe Conditions written by Koji Sakai and published by Taylor & Francis US. This book was released on 1995 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovations and Developments in Concrete Materials and Construction written by Ravindra K. Dhir and published by Thomas Telford. This book was released on 2002 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no substitute for concrete that can be used on the same engineering scale. Its sustainability, exploitation and further development are necessary for a healthy economy and environment worldwide. Concrete must keep evolving to satisfy the increasing demands of all its users.
Download or read book Hot Deserts written by M. J. Walker and published by Geological Society of London. This book was released on 2012 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an authoritative and comprehensive state-of-the-art review of hot desert terrains in all parts of the world, their geomaterials and influence on civil engineering site investigation, design and construction. It primarily covers conditions and materials in modern hot deserts, but there is also coverage of unmodified ancient desert soils that exhibit engineering behaviour similar to modern desert materials. Thorough and up-to-date guidance on modern field evaluation and ground investigation techniques in hot arid areas is provided, including reference to a new approach to the desert model and detailed specialised assessments of the latest methods for materials characterisation and testing. The volume is based on world-wide experience in hot desert terrain and draws upon the knowledge and expertise of the members of a Geological Society Engineering Group Working Party comprising practising geologists, geomorphologists and civil engineers with a wealth of varied, but complementary experience of working in hot deserts. It is an essential reference book for professionals, as well as a valuable textbook for students. It is written in a style that is accessible to the non-specialist. A comprehensive glossary is also included. The Geological Society of London. Founded in 1807, the Geological Society of London is the oldest geological society in the world, and one of the largest publishers in the Earth sciences. The Society publishes a wide range of high-quality peer-reviewed titles for academics and professionals working in the geosciences, and enjoys an enviable international reputation for the quality of its work.
Download or read book Special Cements for Mass Concrete written by John Lucian Savage and published by . This book was released on 1936 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials written by Alan Everett and published by Routledge. This book was released on 2014-05-12 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: A well-known and respected standard reference, this fifth edition provides a thorough treatment of the properties of building materials and their manufacture, both on-site and in the factory.
Download or read book Concrete Materials and Structures written by C. B. Wilby and published by CUP Archive. This book was released on 1991-05-30 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Multi Scale Modeling of Structural Concrete written by Koichi Maekawa and published by CRC Press. This book was released on 2008-11-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increases in computer power have now enabled engineers to combine materials science with structural mechanics in the design and the assessment of concrete structures. The techniques developed have become especially useful for the performance assessment of such structures under coupled mechanistic and environmental actions. This allows effective management of infrastructure over a much longer life cycle, thus satisfying the requirements for durability and sustainability. This ground-breaking new book draws on the fields of materials and structural mechanics in an integrated way to address the questions of management and maintenance. It proposes a realistic way of simulating both constituent materials and structural responses under external loading and under ambient conditions. Where the research literature discusses component or element technology related to performance assessment, this book uniquely covers the subject at the level of the whole system including soil foundation, showing engineers how to model changes in concrete structures over time and how to use this for decision making in infrastructure maintenance and asset management.
Download or read book Lea s Chemistry of Cement and Concrete written by Peter Hewlett and published by Elsevier. This book was released on 2003-11-12 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.
Download or read book Computer Aided Concrete Mix Design written by Rajendra Chalisgaonkar and published by Allied Publishers. This book was released on 2003 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Contractor s Guide to Quality Concrete Construction written by and published by American Concrete Institute. This book was released on 2005 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1st fib Congress in Osaka Japan Vol2 written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2002-01-01 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GB T 41054 2021 Translated English of Chinese Standard GBT41054 2021 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2022-06-04 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification and performance levels, general requirements, raw materials, mixing proportions, quality requirements, preparation, test methods, inspection rules, ordering and delivery of high performance concrete. This Standard applies to high performance concrete for industrial and civil construction, municipal, railway, highway, water transportation, marine engineering, water conservancy, energy and other construction projects.
Download or read book The Coast Guard Engineer s Digest written by and published by . This book was released on 1950 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boulder Canyon Project written by and published by . This book was released on 1949 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
