Download or read book Low Environmental Impact Polymers written by Nick Tucker and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the use of renewable resources as chemical feedstocks for the synthesis of polymeric materials has attracted considerable attention. The reason for such activity is due to the finite nature of traditional petrochemical derived compounds in addition to economic and environmental considerations. Thus a key goal of the coming years will be the development of sustainable raw materials for the chemical industry that will replace current fossil-based feedstocks. The challenge for researchers is to develop natural and manmade synthetics that would reduce the emission of gases. This book gives a thorough overview of the manufacture and uses of low environmental impact polymers. This book will provide information for the experienced user of polymers wanting to use biodegradable materials and also be useful to designers, specifiers, end users and waste managers.
Download or read book Environmentally Friendly Polymers and Polymer Composites written by Rafael Balart and published by MDPI. This book was released on 2021-03-17 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous research advances have been observed in the field of environmentally-friendly polymers and polymer composites due to the dependence of polymers on fossil fuels and the sustainability issues related to plastic wastes. This book compiles the most recent research works in biopolymers, their blends and composites, and the use of natural additives, such as vegetable oils and other renewable and waste-derived liquids, with their marked environmental efficiency devoted to developing novel sustainable materials. Therefore, Environmentally Friendly Polymers and Polymer Composites provides an overview to scientists of the potential of these environmentally friendly materials and helps engineers to apply these new materials for industrial purposes.
Download or read book Polymers and the Environment written by G Scott and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: As environmental performance becomes increasingly important, the development of man-made polymers and their associated benefits has been overshadowed by problems relating to their ultimate disposal. In the light of wider acceptance of polymers for use in high technology applications, Polymers and the Environment aims to redress the balance. The book reviews the properties and industrial applications of polymers and discusses their environmental benefits compared with traditional materials. It also addresses the issues of polymer durability, recycling processes to aid waste minimization and biodegradable polymers. This text is intended to introduce the non-specialist reader to the benefits and limitations of polymeric materials from an environmental viewpoint, and will prove a useful book for both students and professionals.
Download or read book Polymers written by Adisa Azapagic and published by John Wiley and Sons. This book was released on 2007-12-10 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling von Kunststoffen, Gummi und anderen Polymeren: Wie beeinflussen solche Prozesse unsere Umwelt? Dieser Frage geht der vorliegende Band nach, wobei sich der Autor auf die neue Gesetzgebung in den USA, Japan und der EU bezieht, die Polymerhersteller zum Recycling zwingt. Vor- und Nachteile der Recyclingkreisläufe werden einander gegenübergestellt. Alle Kapitel enthalten Beispielfragen und -antworten.
Download or read book Polypropylene written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: My heart sank when I was approached by Dr Hastings and by Professor Briggs (Senior Editor of Materials Science and Technology and Series Editor of Polymer Science and Technology Series at Chapman & Hall, respectively) to edit a book with the provisional title Handbook of Poly propylene. My reluctance was due to the fact that my former book [1] along with that of Moore [2], issued in the meantime, seemed to cover the information demand on polypropylene and related systems. Encour aged, however, by some colleagues (the new generation of scientists and engineers needs a good reference book with easy information retrieval, and the development with metallocene catalysts deserves a new update!), I started on this venture. Having some experience with polypropylene systems and being aware of the current literature, it was easy to settle the titles for the book chapters and also to select and approach the most suitable potential contributors. Fortunately, many of my first-choice authors accepted the invitation to contribute. Like all editors of multi-author volumes, I recognize that obtaining contributors follows an S-type curve of asymptotic saturation when the number of willing contributors is plotted as a function of time. The saturation point is, however, never reached and as a consequence, Dear Reader, you will also find some topics of some relevance which are not explicitly treated in this book (but, believe me, I have considered them).
Download or read book Going to Extremes written by National Research Council and published by National Academies Press. This book was released on 2005-10-22 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced polymer matrix composites (PMC) have many advantages such as light weight and high specific strength that make them useful for many aerospace applications. Enormous uncertainty exists, however, in predicting long-term changes in properties of PMCs under extreme environmental conditions, which has limited their use. To help address this issue, the Department of Defense requested a study from the NRC to identify the barriers and limitations to the use of PMCs in extreme environments. The study was to focus on issues surrounding methodologies for predicting long-term performance. This report provides a review of the challenges facing application of PMCs in extreme environments, the current understanding of PMC properties and behavior, an analysis of the importance of data in developing effective models, and recommendations for improving long-term predictive methodologies.
Download or read book Handbook of Polypropylene and Polypropylene Composites Revised and Expanded written by Harutun Karian and published by CRC Press. This book was released on 2003-03-25 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor with completely revised material and six new chapters, the Handbook of Polypropylene and Polypropylene Composites, Second Edition responds to increasing interest and changing global trends in the manufacture and application of polypropylene resin. The authors highlight viable options for the manufacture of polypropylene composites to better accommodate market requirements across various industries. The second edition introduces chapters on high-purity submicron talc fillers with lamellar microstructures, the utilization of Wollastonite fibers for polypropylene reinforcement, and updated material on nanocomposite production using exfoliated clay treated with maleated polypropylene-based materials, among many other topics.
Download or read book Environmental Impact of Polymers written by Thierry Hamaide and published by John Wiley & Sons. This book was released on 2014-08-08 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text addresses the common negative perception of polymer materials on the environment with a thorough analysis of what really occurs when industry and academia collaborate to find environmental solutions. The book examines the environmental and social effects of polymer materials and explains methods of quantifying environmental performance. With an emphasis on the importance of education, the authors stress the importance of awareness and activity in negating polymers' environmental impact.
Download or read book Polymers from Fossil and Renewable Resources written by Francesco Ciardelli and published by Springer. This book was released on 2019-07-29 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the development and commercialization of materials with viscoelastic properties, placing particular emphasis on the scientific and technological differences between plastics and bioplastics. The authors explain how to handle each of the two types of materials and determine the comparative environmental impact of the material life-cycle. The practical values of the overlapping aspects of the two types of materials from technical properties to eco-compatibility are also discussed.
Download or read book Polymer Green Flame Retardants written by Constantine D. Papaspyrides and published by Newnes. This book was released on 2014-08-14 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Green Flame Retardants covers key issues regarding the response of polymers during fire, the mechanisms of their flame retardation, the regulations imposed on their use, and the health hazards arising from their combustion. Presenting the latest research developments, the book focuses in particular on nanocomposites, believed to be the most promising approach for producing physically superior materials with low flammability and ecological impact. The fire properties of nanocomposites of various matrixes and fillers are discussed, the toxicological characteristics of these materials are analyzed, addressing also their environmental sustainability. Edited by distinguished scientists, including an array of international industry and academia experts, this book will appeal to chemical, mechanical, environmental, material and process engineers, upper-level undergraduate and graduate students in these disciplines, and generally to researchers developing commercially attractive and environmentally friendly fire-proof products. Provides recent findings on the manufacture of environmentally sustainable flame retardant polymeric materials Covers legislation and regulations concerning flame retarded polymeric material use Includes tables containing the fire properties of the most common polymeric materials
Download or read book Industrial Applications of Biopolymers and their Environmental Impact written by Abdullah Al Mamun and published by CRC Press. This book was released on 2020-11-23 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers represent a carbon emission solution: they are green and eco-friendly with a variety of uses in biomedical engineering, the automotive industry, the packaging and paper industries, and for the development of new building materials. This book describes the various raw materials of biopolymers and their chemical and physical properties, the polymerization process, and the chemical structure and properties of biopolymers. Furthermore, this book identifies the drawbacks of biopolymers and how to overcome them through modification methods to enhance the compatibility, flexibility, physicochemical properties, thermal stability, impact response, and rigidity.
Download or read book Polymer Science written by Faris Yılmaz and published by BoD – Books on Demand. This book was released on 2013-01-23 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last ten to fifteen years the developments in polymer science has been striking attention and undergone important changes. From rather specialized subject intended for engineers interested in certain definite fields, it has developed into one of the fundamental disciplines common to several branches of engineering and science. To serve this purpose, the subject materials have been prepared to treat a comprehensive aspects of polymer science. Following this trend, a number of rigorous books have discussed different types of polymers with great precision and elegance and at relatively high levels of abstraction, but none is complementary. A position midway between the older, traditional approach in engineering and the recent, somewhat formal expositions seems to be evolving.
Download or read book Wood Polymer Composites written by Sanjay Mavinkere Rangappa and published by Springer Nature. This book was released on 2021-04-27 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively covers the different topics of wood polymer composite materials mainly synthesis methods for the composite materials, various characterization techniques to study the superior properties and insights on potential advanced applications. It also discusses the chemistry, fabrication process, properties, applications, recycling and life cycle assessment of wood polymer composites. This is a useful reference source for both engineers and researchers working in composite materials science as well as the students attending materials science, physics, chemistry and engineering courses.
Download or read book 2024 the 8th International Conference on Energy and Environmental Science ICEES 2024 written by Yanan Liu and published by Springer Nature. This book was released on with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymers Opportunities and Risks I written by Peter Eyerer and published by Springer Science & Business Media. This book was released on 2010-07-31 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their first industrial use polymers have gained a tremendous success. The two volumes of "Polymers - Opportunities and Risks" elaborate on both their potentials and on the impact on the environment arising from their production and applications. Volume 11 "Polymers - Opportunities and Risks I: General and Environmental Aspects" is dedicated to the basics of the engineering of polymers – always with a view to possible environmental implications. Topics include: materials, processing, designing, surfaces, the utilization phase, recycling, and depositing. Volume 12 "Polymers - Opportunities and Risks II: Sustainability, Product Design and Processing" highlights raw materials and renewable polymers, sustainability, additives for manufacture and processing, melt modification, biodegradation, adhesive technologies, and solar applications. All contributions were written by leading experts with substantial practical experience in their fields. They are an invaluable source of information not only for scientists, but also for environmental managers and decision makers.
Download or read book Polymers written by Adisa Azapagic and published by John Wiley and Sons. This book was released on 2007-12-10 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling von Kunststoffen, Gummi und anderen Polymeren: Wie beeinflussen solche Prozesse unsere Umwelt? Dieser Frage geht der vorliegende Band nach, wobei sich der Autor auf die neue Gesetzgebung in den USA, Japan und der EU bezieht, die Polymerhersteller zum Recycling zwingt. Vor- und Nachteile der Recyclingkreisläufe werden einander gegenübergestellt. Alle Kapitel enthalten Beispielfragen und -antworten.
Download or read book Encyclopedia of Polymer Applications 3 Volume Set written by Munmaya Mishra and published by CRC Press. This book was released on 2018-12-17 with total page 2954 pages. Available in PDF, EPUB and Kindle. Book excerpt: Undoubtedly the applications of polymers are rapidly evolving. Technology is continually changing and quickly advancing as polymers are needed to solve a variety of day-to-day challenges leading to improvements in quality of life. The Encyclopedia of Polymer Applications presents state-of-the-art research and development on the applications of polymers. This groundbreaking work provides important overviews to help stimulate further advancements in all areas of polymers. This comprehensive multi-volume reference includes articles contributed from a diverse and global team of renowned researchers. It offers a broad-based perspective on a multitude of topics in a variety of applications, as well as detailed research information, figures, tables, illustrations, and references. The encyclopedia provides introductions, classifications, properties, selection, types, technologies, shelf-life, recycling, testing and applications for each of the entries where applicable. It features critical content for both novices and experts including, engineers, scientists (polymer scientists, materials scientists, biomedical engineers, macromolecular chemists), researchers, and students, as well as interested readers in academia, industry, and research institutions.