Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed.
Download or read book Copper Interconnect Technology written by Tapan Gupta and published by Springer Science & Business Media. This book was released on 2010-01-22 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since overall circuit performance has depended primarily on transistor properties, previous efforts to enhance circuit and system speed were focused on transistors as well. During the last decade, however, the parasitic resistance, capacitance, and inductance associated with interconnections began to influence circuit performance and will be the primary factors in the evolution of nanoscale ULSI technology. Because metallic conductivity and resistance to electromigration of bulk copper (Cu) are better than aluminum, use of copper and low-k materials is now prevalent in the international microelectronics industry. As the feature size of the Cu-lines forming interconnects is scaled, resistivity of the lines increases. At the same time electromigration and stress-induced voids due to increased current density become significant reliability issues. Although copper/low-k technology has become fairly mature, there is no single book available on the promise and challenges of these next-generation technologies. In this book, a leader in the field describes advanced laser systems with lower radiation wavelengths, photolithography materials, and mathematical modeling approaches to address the challenges of Cu-interconnect technology.
Download or read book Low Pressure Plasmas and Microstructuring Technology written by Gerhard Franz and published by Springer Science & Business Media. This book was released on 2009-04-09 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last forty years, plasma supported processes have attracted ever - creasing interest, and now, all modern semiconductor devices undergo at least one plasma-involved processing step, starting from surface cleaning via coating to etching. In total, the range of the treated substrates covers some orders of magnitude: Trenches and linewidths of commercially available devices have - ready passed the boundary of 100 nm, decorative surface treatment will happen 2 in the mm range, and the upper limit is reached with surface protecting layers of windows which are coated with ?/4 layers against IR radiation. The rapid development of the semiconductor industry is inconceivable wi- outthegiantprogressintheplasmatechnology.Moore’slawisnotcarvedinto 1 stone, and not only the ITRS map is subject to change every ?ve years but also new branches develop and others mingle together. Moreover, the quality of conventional materials can be improved by plasma treatment:Cottonbecomesmorecrease-resistant,leathermoredurable,andthe shrinking of wool ?bers during the washing process can be signi?cantly reduced. To cut a long story short: More than 150 years after the discovery of the sputtering e?ect by Grove, plasma-based processes are about to spread out into new ?elds of research and application [1]—no wonder that the market for etching machines kept growing by an annual rate of 17 % up to the burst of the internet bubble, and it took only some years of recovery to continue the voyage [2].
Download or read book Advanced Interconnects for ULSI Technology written by Mikhail Baklanov and published by John Wiley & Sons. This book was released on 2012-02-17 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding new materials for copper/low-k interconnects is critical to the continuing development of computer chips. While copper/low-k interconnects have served well, allowing for the creation of Ultra Large Scale Integration (ULSI) devices which combine over a billion transistors onto a single chip, the increased resistance and RC-delay at the smaller scale has become a significant factor affecting chip performance. Advanced Interconnects for ULSI Technology is dedicated to the materials and methods which might be suitable replacements. It covers a broad range of topics, from physical principles to design, fabrication, characterization, and application of new materials for nano-interconnects, and discusses: Interconnect functions, characterisations, electrical properties and wiring requirements Low-k materials: fundamentals, advances and mechanical properties Conductive layers and barriers Integration and reliability including mechanical reliability, electromigration and electrical breakdown New approaches including 3D, optical, wireless interchip, and carbon-based interconnects Intended for postgraduate students and researchers, in academia and industry, this book provides a critical overview of the enabling technology at the heart of the future development of computer chips.
Download or read book Handbook of Advanced Plasma Processing Techniques written by R.J. Shul and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pattern transfer by dry etching and plasma-enhanced chemical vapor de position are two of the cornerstone techniques for modern integrated cir cuit fabrication. The success of these methods has also sparked interest in their application to other techniques, such as surface-micromachined sen sors, read/write heads for data storage and magnetic random access memory (MRAM). The extremely complex chemistry and physics of plasmas and their interactions with the exposed surfaces of semiconductors and other materi als is often overlooked at the manufacturing stage. In this case, the process is optimized by an informed "trial-and-error" approach which relies heavily on design-of-experiment techniques and the intuition of the process engineer. The need for regular cleaning of plasma reactors to remove built-up reaction or precursor gas products adds an extra degree of complexity because the interaction of the reactive species in the plasma with the reactor walls can also have a strong effect on the number of these species available for etching or deposition. Since the microelectronics industry depends on having high process yields at each step of the fabrication process, it is imperative that a full understanding of plasma etching and deposition techniques be achieved.
Download or read book CVD Polymers written by Karen K. Gleason and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of CVD (chemical vapor deposition) is a versatile technique to fabricate high-quality thin films and structured surfaces in the nanometer regime from the vapor phase. Already widely used for the deposition of inorganic materials in the semiconductor industry, CVD has become the method of choice in many applications to process polymers as well. This highly scalable technique allows for synthesizing high-purity, defect-free films and for systematically tuning their chemical, mechanical and physical properties. In addition, vapor phase processing is critical for the deposition of insoluble materials including fluoropolymers, electrically conductive polymers, and highly crosslinked organic networks. Furthermore, CVD enables the coating of substrates which would otherwise dissolve or swell upon exposure to solvents. The scope of the book encompasses CVD polymerization processes which directly translate the chemical mechanisms of traditional polymer synthesis and organic synthesis in homogeneous liquids into heterogeneous processes for the modification of solid surfaces. The book is structured into four parts, complemented by an introductory overview of the diverse process strategies for CVD of polymeric materials. The first part on the fundamentals of CVD polymers is followed by a detailed coverage of the materials chemistry of CVD polymers, including the main synthesis mechanisms and the resultant classes of materials. The third part focuses on the applications of these materials such as membrane modification and device fabrication. The final part discusses the potential for scale-up and commercialization of CVD polymers.
Download or read book Glow Discharge Processes written by Brian Chapman and published by Wiley-Interscience. This book was released on 1980 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops detailed understanding of the deposition and etching of materials by sputtering discharge, and of etching of materials by chemically active discharge. Treats glow discharge at several levels from basic phenomena to industrial applications--practical techniques diligently related to fundamentals. Subjects range from voltage, distributions encountered in plasma etching systems to plasma-electron interactions that contribute to sustaining the discharge.
Download or read book Advances in Chemical Mechanical Planarization CMP written by Babu Suryadevara and published by Woodhead Publishing. This book was released on 2021-09-10 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Mechanical Planarization (CMP), Second Edition provides the latest information on a mainstream process that is critical for high-volume, high-yield semiconductor manufacturing, and even more so as device dimensions continue to shrink. The second edition includes the recent advances of CMP and its emerging materials, methods, and applications, including coverage of post-CMP cleaning challenges and tribology of CMP. This important book offers a systematic review of fundamentals and advances in the area. Part one covers CMP of dielectric and metal films, with chapters focusing on the use of current and emerging techniques and processes and on CMP of various materials, including ultra low-k materials and high-mobility channel materials, and ending with a chapter reviewing the environmental impacts of CMP processes. New content addressed includes CMP challenges with tungsten, cobalt, and ruthenium as interconnect and barrier films, consumables for ultralow topography and CMP for memory devices. Part two addresses consumables and process control for improved CMP and includes chapters on CMP pads, diamond disc pad conditioning, the use of FTIR spectroscopy for characterization of surface processes and approaches for defection characterization, mitigation, and reduction. Advances in Chemical Mechanical Planarization (CMP), Second Edition is an invaluable resource and key reference for materials scientists and engineers in academia and R&D. - Reviews the most relevant techniques and processes for CMP of dielectric and metal films - Includes chapters devoted to CMP for current and emerging materials - Addresses consumables and process control for improved CMP, including post-CMP
Download or read book Dry Etching Technology for Semiconductors written by Kazuo Nojiri and published by Springer. This book was released on 2014-10-25 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a must-have reference to dry etching technology for semiconductors, which will enable engineers to develop new etching processes for further miniaturization and integration of semiconductor integrated circuits. The author describes the device manufacturing flow, and explains in which part of the flow dry etching is actually used. The content is designed as a practical guide for engineers working at chip makers, equipment suppliers and materials suppliers, and university students studying plasma, focusing on the topics they need most, such as detailed etching processes for each material (Si, SiO2, Metal etc) used in semiconductor devices, etching equipment used in manufacturing fabs, explanation of why a particular plasma source and gas chemistry are used for the etching of each material, and how to develop etching processes. The latest, key technologies are also described, such as 3D IC Etching, Dual Damascene Etching, Low-k Etching, Hi-k/Metal Gate Etching, FinFET Etching, Double Patterning etc.
Download or read book Plasma Processing of Semiconductors written by Paul Williams and published by Springer Science & Business Media. This book was released on 1997-05-31 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Processing of Semiconductors contains 28 contributions from 18 experts and covers plasma etching, plasma deposition, plasma-surface interactions, numerical modelling, plasma diagnostics, less conventional processing applications of plasmas, and industrial applications. Audience: Coverage ranges from introductory to state of the art, thus the book is suitable for graduate-level students seeking an introduction to the field as well as established workers wishing to broaden or update their knowledge.
Download or read book The Handbook of Infrared and Raman Characteristic Frequencies of Organic Molecules written by Daimay Lin-Vien and published by Elsevier. This book was released on 1991-12-02 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This necessary desk reference for every practicing spectroscopist represents the first definitive book written specifically to integrate knowledge about group frequencies in infrared as well as Raman spectra. In the spirit of previous classics developed by Bellamy and others, this volume has expanded its scope and updated its coverage. In addition to detailing characteristic group frequencies of compounds from a comprehensive assortment of categories, the book includes a collection of spectra and a literature search conducted to verify existing correlations and to determine ways to enhance correlations between vibrational frequencies and molecular structure. Particular attention has been given to the correlation between Raman characteristic frequencies and molecular structure. - Constitutes a necessary reference for every practicing vibrational spectroscopist - Provides the new definitive text on characteristic frequencies of organic molecules - Incorporates group frequencies for both infrared and Raman spectra - Details the characteristic IR and Raman frequencies of compounds in more than twenty major categories - Includes an extensive collection of spectra - Compiled by internationally recognized experts
Download or read book Electrodynamics of Metamaterials written by Andrey K. Sarychev and published by World Scientific. This book was released on 2007 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Local electromagnetic field fluctuations and related enhancement of nonlinear phenomena in metal-dielectric composites near the percolation threshold (percolation composites) have recently become an area of active study, because of the many fundamental problems involved and the high potential for various applications. It has been recognized recently that local field fluctuations can be especially large in the optical and infrared spectral ranges due to the surface plasmon resonance in metallic granules and their clusters. The strong fluctuations of the local electric and magnetic fields result in the enhancement of various optical effects: anomalous absorption, Rayleigh and Raman scattering, generation of the higher harmonic, Kerr nonlinearity, etc. Nonlinear percolation composites are potentially of great practical importance as media with intensity-dependent dielectric functions and, in particular, as nonlinear filters and optical bistable elements. The optical response of nonlinear composites can be tuned, for example, by controlling the volume fraction and morphology of constituents. This book presents a new theory of electromagnetic field distribution and nonlinear optical processes in metal-dielectric composites. The new approach is based on a percolation theory and the fact that the problem of optical excitations in percolation composites mathematically maps the Anderson transition problem in quantum mechanics. The theory predicts localization of the excitations (surface plasmons) in percolation composites and describes in detail the localization pattern that allows one to obtain relatively simple expressions for the enhancement of linear and nonlinear optical responses. Thistheory is supported by recent near-field experiments where the surface plasmon localization has been directly observed in the percolating composites in optical and microwave bands.
Download or read book Atomic Layer Deposition of Nanostructured Materials written by Nicola Pinna and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomic layer deposition, formerly called atomic layer epitaxy, was developed in the 1970s to meet the needs of producing high-quality, large-area fl at displays with perfect structure and process controllability. Nowadays, creating nanomaterials and producing nanostructures with structural perfection is an important goal for many applications in nanotechnology. As ALD is one of the important techniques which offers good control over the surface structures created, it is more and more in the focus of scientists. The book is structured in such a way to fi t both the need of the expert reader (due to the systematic presentation of the results at the forefront of the technique and their applications) and the ones of students and newcomers to the fi eld (through the first part detailing the basic aspects of the technique). This book is a must-have for all Materials Scientists, Surface Chemists, Physicists, and Scientists in the Semiconductor Industry.
Download or read book Plasma Deposition Treatment and Etching of Polymers written by Riccardo d'Agostino and published by Elsevier. This book was released on 2012-12-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Deposition, Treatment, and Etching of Polymers takes a broad look at the basic principles, the chemical processes, and the diagnostic procedures in the interaction of plasmas with polymer surfaces. This recent technology has yielded a large class of new materials offering many applications, including their use as coatings for chemical fibers and films. Additional applications include uses for the passivation of metals, the surface hardening of tools, increased biocompatibility of biomedical materials, chemical and physical sensors, and a variety of micro- and optoelectronic devices. - Appeals to a broad range of industries from microelectronics to space technology - Discusses a wide array of new uses for plasma polymers - Provides a tutorial introduction to the field - Surveys various classes of plasma polymers, their chemical and morphological properties, effects of plasma process parameters on the growth and structure of these synthetic materials, and techniques for characterization - Interests scientists, engineers, and students alike
Download or read book Metal Amide Chemistry written by Michael Lappert and published by John Wiley & Sons. This book was released on 2008-12-23 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by internationally recognised leaders in the field, Metal Amide Chemistry is the authoritative survey of this important class of compounds, the first since Lappert and Power’s 1980 book “Metal and Metalloid Amides.” An introduction to the topic is followed by in-depth discussions of the amide compounds of: alkali metals alkaline earth metals zinc, cadmium and mercury the transition metals group 3 and lanthanide metals group 13 metals silicon and the group 14 metals group 15 metals the actinide metals Accompanied by a substantial bibliography, this is an essential guide for researchers and advanced students in academia and research working in synthetic organometallic, organic and inorganic chemistry, materials chemistry and catalysis.
Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.
Download or read book Thin Films on Silicon written by Vijay Narayanan and published by . This book was released on 2016 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume provides a broad overview of the fundamental materials science of thin films that use silicon as an active substrate or passive template, with an emphasis on opportunities and challenges for practical applications in electronics and photonics. It covers three materials classes on silicon: Semiconductors such as undoped and doped Si and SiGe, SiC, GaN, and III-V arsenides and phosphides; dielectrics including silicon nitride and high-k, low-k, and electro-optically active oxides; and metals, in particular silicide alloys. The impact of film growth and integration on physical, electrical, and optical properties, and ultimately device performance, is highlighted."--Publisher's website.
