Download or read book Low data Simulation of Diffractive Optical Elements Based on the Zones Geometry written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and simulation of two-dimensional diffractive optical elements are often limited by the amount of data required to represent the element in the computer's memory. We present a technique based on a geometrical description of the element, which requires fewer data than the traditional pixel description. Moreover, the element is being described more accurately and consequently the pixel-related artefacts are suppressed. This technique can be used for both periodic and non-periodic structures of large dimensions under Fraunhofer or Fresnel approximations. We apply the method to analysis of far-field beam-shaping elements and discuss possible extensions and refinements of the technique.
Download or read book Design and Fabrication of Diffractive Optical Elements with MATLAB written by Shanti Bhattacharya and published by SPIE-International Society for Optical Engineering. This book was released on 2017 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Given the many different applications and uses of diffractive optics, the importance of this field cannot be underestimated. This book supplements the available literature on diffractive optic elements (DOEs) by equipping readers with the skills to begin designing, simulating, and fabricating diffractive optics. The design of DOEs is presented with simple equations and step-by-step procedures for simulation--from the simplest 1D grating to the more complex multifunctional DOEs--and analyzing their diffraction patterns using MATLAB. The fundamentals of fabrication techniques such as photolithography, electron beam lithography, and focused ion beam lithography with basic instructions for the beginner are presented. Basic error analysis and error-correction techniques for a few cases are also discussed. The contents of all the chapters are supported throughout by practical exercises and clearly commented MATLAB® codes (the codes are also on an accompanying CD), making this book useful even to a novice programmer"--
Download or read book Modelling Simulation and Data Analysis in Acoustical Problems written by Claudio Guarnaccia and published by MDPI. This book was released on 2020-06-23 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and simulation in acoustics is currently gaining importance. In fact, with the development and improvement of innovative computational techniques and with the growing need for predictive models, an impressive boost has been observed in several research and application areas, such as noise control, indoor acoustics, and industrial applications. This led us to the proposal of a special issue about “Modelling, Simulation and Data Analysis in Acoustical Problems”, as we believe in the importance of these topics in modern acoustics’ studies. In total, 81 papers were submitted and 33 of them were published, with an acceptance rate of 37.5%. According to the number of papers submitted, it can be affirmed that this is a trending topic in the scientific and academic community and this special issue will try to provide a future reference for the research that will be developed in coming years.
Download or read book Diffractive Optics and Nanophotonics written by Igor Minin and published by Springer. This book was released on 2015-10-29 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors present several examples of techniques used to overcome the Abby diffraction limit using flat and 3D diffractive optical elements, photonic crystal lenses, photonic jets, and surface plasmon diffractive optics. The structures discussed can be used in the microwave and THz range and also as scaled models for optical frequencies. Such nano-optical microlenses can be integrated, for example, into existing semiconductor heterostructure platforms for next-generation optoelectronic applications. Chapter 1 considers flat diffractive lenses and innovative 3D radiating structures including a conical millimeter-wave Fresnel zone plate (FZP) lens proposed for subwavelength focusing. In chapter 2 the subwavelength focusing properties of diffractive photonic crystal lenses are considered and it is shown that at least three different types of photonic crystal lens are possible. With the aim of achieving subwavelength focusing, in chapter 3 an alternative mechanism to produce photonic jets at Terahertz frequencies (terajets) using 3D dielectric particles of arbitrary size (cuboids) is considered. A scheme to create a 2D “teraknife” using dielectric rods is also discussed. In the final chapter the successful adaptation of free-space 3D binary phase-reversal conical FZPs for operation on surface plasmon-polariton (SPP) waves demonstrates that analogues of Fourier diffractive components can be developed for in-plane SPP 3D optics. Review ing theory, modelling and experiment, this book will be a valuable resource for students and researchers working on nanophotonics and sub-wavelength focusing and imaging.
Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book Astronomical Optics written by Daniel J. Schroeder and published by Elsevier. This book was released on 2012-12-02 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a recognized expert in the field, this clearly presented, well-illustrated book provides both advanced level students and professionals with an authoritative, thorough presentation of the characteristics, including advantages and limitations, of telescopes and spectrographic instruments used by astronomers of today. Written by a recognized expert in the field Provides both advanced level students and professionals with an authoritative, thorough presentation of the characteristics, including advantages and limitations, of telescopes and spectrographic instruments used by astronomers of today
Download or read book Surface Plasmon Nanophotonics written by Mark L. Brongersma and published by Springer. This book was released on 2007-09-18 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses a new class of photonic devices, known as surface plasmon nanophotonic structures. The book highlights several exciting new discoveries, while providing a clear discussion of the underlying physics, the nanofabrication issues, and the materials considerations involved in designing plasmonic devices with new functionality. Chapters written by the leaders in the field of plasmonics provide a solid background to each topic.
Download or read book Optical Holography written by Pierre-Alexandre Blanche and published by Elsevier. This book was released on 2019-10-23 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Holography: Materials, Theory and Applications provides researchers the fundamentals of holography through diffraction optics and an overview of the most relevant materials and applications, ranging from computer holograms to holographic data storage. Dr. Pierre Blanche leads a team of thought leaders in academia and industry in this practical reference for researchers and engineers in the field of holography. This book presents all the information readers need in order to understand how holographic techniques can be applied to a variety of applications, the benefits of those techniques, and the materials that enable these technologies. Researchers and engineers will gain comprehensive knowledge on how to select the best holographic techniques for their needs. Covers current applications of holographic techniques in areas such as 3D television, solar concentration, non-destructive testing and data storage Describes holographic recording materials and their most relevant applications Provides the fundamentals of holography and diffraction optics
Download or read book Nanoscale Photonic Imaging written by Tim Salditt and published by Springer Nature. This book was released on 2020-06-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book, edited and authored by a team of world-leading researchers, provides a broad overview of advanced photonic methods for nanoscale visualization, as well as describing a range of fascinating in-depth studies. Introductory chapters cover the most relevant physics and basic methods that young researchers need to master in order to work effectively in the field of nanoscale photonic imaging, from physical first principles, to instrumentation, to mathematical foundations of imaging and data analysis. Subsequent chapters demonstrate how these cutting edge methods are applied to a variety of systems, including complex fluids and biomolecular systems, for visualizing their structure and dynamics, in space and on timescales extending over many orders of magnitude down to the femtosecond range. Progress in nanoscale photonic imaging in Göttingen has been the sum total of more than a decade of work by a wide range of scientists and mathematicians across disciplines, working together in a vibrant collaboration of a kind rarely matched. This volume presents the highlights of their research achievements and serves as a record of the unique and remarkable constellation of contributors, as well as looking ahead at the future prospects in this field. It will serve not only as a useful reference for experienced researchers but also as a valuable point of entry for newcomers.
Download or read book Introduction to Micro and Nanooptics written by Jürgen Jahns and published by John Wiley & Sons. This book was released on 2012-07-10 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses erste Lehrbuch, das Mikro- und Nanooptik unter einem Dach behandelt, führt Sie in Physik, Technologie und Schlüsselanwendungen gleichermaßen gründlich ein. Zunächst geht es um die Physik des Lichts, ergänzt durch Kapitel zu brechenden und beugenden optischen Elementen. Die erfahrenen Autoren erläutern lithographische und andere Herstellungsverfahren für mikro- und nanooptische Bauelemente vor. Im zweiten Teil werden detail- und kenntnisreich optische Mikrosysteme und Wellenleiter sowie optischen Nanostrukturen wie photonische Kristalle und Metamaterialien behandelt. Jedes Kapitel enthält Fragen und Aufgaben. Das Lehrbuch ist geeignet für Vorlesungen in Physik und angewandter Optik.
Download or read book Gratings Theory and Numeric Applications written by and published by Popov, Institut Fresnel. This book was released on with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Digital Optics written by Bernard C. Kress and published by John Wiley & Sons. This book was released on 2009-11-04 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miniaturization and mass replications have begun to lead the optical industry in the transition from traditional analog to novel digital optics. As digital optics enter the realm of mainstream technology through the worldwide sale of consumer electronic devices, this timely book aims to present the topic of digital optics in a unified way. Ranging from micro-optics to nanophotonics, and design to fabrication through to integration in final products, it reviews the various physical implementations of digital optics in either micro-refractives, waveguide (planar lightwave chips), diffractive and hybrid optics or sub-wavelength structures (resonant gratings, surface plasmons, photonic crystals and metamaterials). Finally, it presents a comprehensive list of industrial and commercial applications that are taking advantage of the unique properties of digital optics. Applied Digital Optics is aimed primarily at optical engineers and product development and technical marketing managers; it is also of interest to graduate-level photonics students and micro-optic foundries. Helps optical engineers review and choose the appropriate software tools to design, model and generate fabrication files. Gives product managers access to an exhaustive list of applications available in today’s market for integrating such digital optics, as well as where the next potential application of digital optics might be. Provides a broad view for technical marketing managers in all aspects of digital optics, and how such optics can be classified. Explains the numerical implementation of optical design and modelling techniques. Enables micro-optics foundries to integrate the latest fabrication and replication techniques, and accordingly fine tune their own fabrication processes.
Download or read book Quantum Information Processing with Diamond written by Steven Prawer and published by Elsevier. This book was released on 2014-05-12 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond nitrogen vacancy (NV) color centers can transform quantum information science into practical quantum information technology, including fast, safe computing. Quantum Information Processing with Diamond looks at the principles of quantum information science, diamond materials, and their applications. Part one provides an introduction to quantum information processing using diamond, as well as its principles and fabrication techniques. Part two outlines experimental demonstrations of quantum information processing using diamond, and the emerging applications of diamond for quantum information science. It contains chapters on quantum key distribution, quantum microscopy, the hybridization of quantum systems, and building quantum optical devices. Part three outlines promising directions and future trends in diamond technologies for quantum information processing and sensing. Quantum Information Processing with Diamond is a key reference for R&D managers in industrial sectors such as conventional electronics, communication engineering, computer science, biotechnology, quantum optics, quantum mechanics, quantum computing, quantum cryptology, and nanotechnology, as well as academics in physics, chemistry, biology, and engineering. Brings together the topics of diamond and quantum information processing Looks at applications such as quantum computing, neural circuits, and in vivo monitoring of processes at the molecular scale
Download or read book Nanocomposites as Next Generation Optical Materials written by Daniel Werdehausen and published by Springer Nature. This book was released on 2021-06-11 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at advanced nanocomposites, introducing long-awaited concepts towards bridging the gap between nanostructured optical materials and next-generation imaging systems. It investigates nanocomposites as bulk optical materials and highlights the immense potential they hold for real-world optical elements and systems, such as smartphone cameras. It covers the full spectrum of nanocomposite optical materials from their fundamental properties to analytical modeling and detailed application examples. This book also provides an in-depth discussion of the role these new materials play in the development of broadband flat optics – diffractive optical elements used for enhancing high-end broadband imaging systems. Written by an industry expert, this book seamlessly connects fundamental research and real-world applications. It is the ideal guide both for optical engineers working towards integrating new technologies, and researchers involved with fundamental research on optical materials.
Download or read book Introduction to the Finite Difference Time Domain FDTD Method for Electromagnetics written by Stephen Gedney and published by Springer Nature. This book was released on 2022-05-31 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Finite-Difference Time-Domain (FDTD) Method for Electromagnetics provides a comprehensive tutorial of the most widely used method for solving Maxwell's equations -- the Finite Difference Time-Domain Method. This book is an essential guide for students, researchers, and professional engineers who want to gain a fundamental knowledge of the FDTD method. It can accompany an undergraduate or entry-level graduate course or be used for self-study. The book provides all the background required to either research or apply the FDTD method for the solution of Maxwell's equations to practical problems in engineering and science. Introduction to the Finite-Difference Time-Domain (FDTD) Method for Electromagnetics guides the reader through the foundational theory of the FDTD method starting with the one-dimensional transmission-line problem and then progressing to the solution of Maxwell's equations in three dimensions. It also provides step by step guides to modeling physical sources, lumped-circuit components, absorbing boundary conditions, perfectly matched layer absorbers, and sub-cell structures. Post processing methods such as network parameter extraction and far-field transformations are also detailed. Efficient implementations of the FDTD method in a high level language are also provided. Table of Contents: Introduction / 1D FDTD Modeling of the Transmission Line Equations / Yee Algorithm for Maxwell's Equations / Source Excitations / Absorbing Boundary Conditions / The Perfectly Matched Layer (PML) Absorbing Medium / Subcell Modeling / Post Processing
Download or read book Fourier Methods in Imaging written by Roger L. Easton Jr. and published by John Wiley & Sons. This book was released on 2010-11-18 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourier Methods in Imaging introduces the mathematical tools for modeling linear imaging systems to predict the action of the system or for solving for the input. The chapters are grouped into five sections, the first introduces the imaging “tasks” (direct, inverse, and system analysis), the basic concepts of linear algebra for vectors and functions, including complex-valued vectors, and inner products of vectors and functions. The second section defines "special" functions, mathematical operations, and transformations that are useful for describing imaging systems. Among these are the Fourier transforms of 1-D and 2-D function, and the Hankel and Radon transforms. This section also considers approximations of the Fourier transform. The third and fourth sections examine the discrete Fourier transform and the description of imaging systems as linear "filters", including the inverse, matched, Wiener and Wiener-Helstrom filters. The final section examines applications of linear system models to optical imaging systems, including holography. Provides a unified mathematical description of imaging systems. Develops a consistent mathematical formalism for characterizing imaging systems. Helps the reader develop an intuitive grasp of the most common mathematical methods, useful for describing the action of general linear systems on signals of one or more spatial dimensions. Offers parallel descriptions of continuous and discrete cases. Includes many graphical and pictorial examples to illustrate the concepts. This book helps students develop an understanding of mathematical tools for describing general one- and two-dimensional linear imaging systems, and will also serve as a reference for engineers and scientists
Download or read book Micro Optics written by H. P. Herzig and published by CRC Press. This book was released on 1997-04-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the technology behind the plethora of modern industrial and domestic technologies which incorporate micro-optics eg. CDs, cameras, automated manufacturing systems, mobile communications etc. It includes a simple but comprehensive introduction to micro-optical developments design, and an overview of fabrication and replication tec
