Download or read book Flip Chip Hybrid Bonding Fan In and Fan Out Technology written by John H. Lau and published by Springer Nature. This book was released on with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multichip Module Technologies and Alternatives The Basics written by Daryl Ann Doane and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Far from being the passive containers for semiconductor devices of the past, the packages in today's high performance computers pose numerous challenges in interconnecting, powering, cooling and protecting devices. While semiconductor circuit performance measured in picoseconds continues to improve, computer performance is expected to be in nanoseconds for the rest of this century -a factor of 1000 difference between on-chip and off-chip performance which is attributable to losses associated with the package. Thus the package, which interconnects all the chips to form a particular function such as a central processor, is likely to set the limits on how far computers can evolve. Multichip packaging, which can relax these limits and also improve the reliability and cost at the systems level, is expected to be the basis of all advanced computers in the future. In addition, since this technology allows chips to be spaced more closely, in less space and with less weight, it has the added advantage of being useful in portable consumer electronics as well as in medical, aerospace, automotive and telecommunications products. The multichip technologies with which these applications can be addressed are many. They range from ceramics to polymer-metal thin films to printed wiring boards for interconnections; flip chip, TAB or wire bond for chip-to-substrate connections; and air or water cooling for the removal of heat.

Download or read book Low Cost Flip Chip Technologies written by John H. Lau and published by McGraw Hill Professional. This book was released on 2000 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the Standard NuBGA Packages -- Thinner Substrate and Nonuniform Heat Spreader NuBGA -- Thermal Performance of the New NuBGA Package -- Temperature Distribution -- Thermal Resistance -- Cooling Power -- Wind Tunnel Experimental Analysis -- Solder Joint Reliability of the New NuBGA Package -- Electrical Performance of the New NuBGA Package -- Capacitance -- Inductance -- Summary of the New NuBGA Package -- Solder-Bumped Flip Chip in PBGA Packages -- Intel's OLGA Package Technology -- OLGA Package Design -- OLGA Wafer Bumping -- OLGA Substrate Technology -- OLGA Package Assembly -- OLGA Package Reliability -- Mitsubishi's FC-BGA Package -- Wafer Bumping -- Mitsubishi's SBU Substrate -- PC-BGA Assembly Process -- Thermal Management -- Electrical Performance -- Qualification Tests and Results -- IBM's FC-PBGA Package -- CFD Analysis for Thermal Boundary Conditions -- Nonlinear Finite Element Stress Analysis -- Simulation Results -- Solder Joint Thermal Fatigue Life Prediction -- Motorola's FC-PBGA Packages -- Thermal Management of FC-PBGA Assemblies with E3 Bumps -- Solder Joint Reliability of FC-PBGA Assemblies with C4 Bumps -- Failure Analysis of Flip Chip on Low-Cost Substrates -- Failure Analysis of FCOB with Imperfect Underfills -- Test Chip -- Test Board -- Flip Chip Assembly -- Preconditions, Reflows, and Qualification Tests -- Failure Modes and Discussions -- Die Cracking -- Interfacial Shear Strength -- Interfacial Shear Strength Between Solder Mask and Underfill.

Download or read book Dielectric Material Integration for Microelectronics written by William D. Brown and published by The Electrochemical Society. This book was released on 1998 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Packaging written by and published by . This book was released on 2008-04 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Packaging serves the semiconductor packaging, assembly and test industry. Strategically focused on emerging and leading-edge methods for manufacturing and use of advanced packages.

Download or read book Microelectronics Technology and Devices SBMicro 2010 written by Marcelo Antonio Pavanello and published by The Electrochemical Society. This book was released on 2010-09 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held in Sao Paulo, Brazil, from September 6 - September 9, 2010, the mission of the 25th Symposium on Microelectronics Technology and Devices ¿ SBMicro2010 was to share ideas and to point to new directions for future research and development. SBMicro offers researchers and practitioners a unique opportunity to share their perspectives with those interested in the various aspects of microelectronics. This issue of ECS Transactions continues the SBMicro tradition of being a premier forum for the presentation of leading edge research on process, devices, sensors and integrated circuit technology.

Download or read book Hardware Security written by Mark Tehranipoor and published by Springer Nature. This book was released on with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solder Joint Reliability Assessment written by Mohd N. Tamin and published by Springer Science & Business. This book was released on 2014-04-26 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept of damage is introduced along with deliberation of cohesive zone model and continuum damage model for simulation of solder/IMC interface and bulk solder joint failure, respectively. Applications of the deliberated methodology to selected problems in assessing reliability of solder joints are demonstrated. These industry-defined research-based problems include solder reflow cooling, temperature cycling and mechanical fatigue of a BGA package, JEDEC board-level drop test and mechanisms of solder joint fatigue. Emphasis is placed on accurate quantitative assessment of solder joint reliability through basic understanding of the mechanics of materials as interpreted from results of FE simulations. The FE simulation methodology is readily applicable to numerous other problems in mechanics of materials and structures.

Download or read book Semiconductor Advanced Packaging written by John H. Lau and published by Springer Nature. This book was released on 2021-05-17 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the design, materials, process, fabrication, and reliability of advanced semiconductor packaging components and systems. Both principles and engineering practice have been addressed, with more weight placed on engineering practice. This is achieved by providing in-depth study on a number of major topics such as system-in-package, fan-in wafer/panel-level chip-scale packages, fan-out wafer/panel-level packaging, 2D, 2.1D, 2.3D, 2.5D, and 3D IC integration, chiplets packaging, chip-to-wafer bonding, wafer-to-wafer bonding, hybrid bonding, and dielectric materials for high speed and frequency. The book can benefit researchers, engineers, and graduate students in fields of electrical engineering, mechanical engineering, materials sciences, and industry engineering, etc.

Download or read book Microelectronic Packaging written by M. Datta and published by CRC Press. This book was released on 2004-12-20 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronic Packaging analyzes the massive impact of electrochemical technologies on various levels of microelectronic packaging. Traditionally, interconnections within a chip were considered outside the realm of packaging technologies, but this book emphasizes the importance of chip wiring as a key aspect of microelectronic packaging, and focuses on electrochemical processing as an enabler of advanced chip metallization. Divided into five parts, the book begins by outlining the basics of electrochemical processing, defining the microelectronic packaging hierarchy, and emphasizing the impact of electrochemical technology on packaging. The second part discusses chip metallization topics including the development of robust barrier layers and alternative metallization materials. Part III explores key aspects of chip-package interconnect technologies, followed by Part IV's analysis of packages, boards, and connectors which covers materials development, technology trends in ceramic packages and multi-chip modules, and electroplated contact materials. Illustrating the importance of processing tools in enabling technology development, the book concludes with chapters on chemical mechanical planarization, electroplating, and wet etching/cleaning tools. Experts from industry, universities, and national laboratories submitted reviews on each of these subjects, capturing the technological advances made in each area. A detailed examination of how packaging responds to the challenges of Moore's law, this book serves as a timely and valuable reference for microelectronic packaging and processing professionals and other industrial technologists.

Download or read book Advanced Information Processing written by Heinz Schwärtzel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last few years, computers have evolved from pure number crunching machines to "intelligent" problem solving tools. Increasing effort has been spent on the investigation of new approaches and the application of solutions to real world problems. In this way, exciting new techniques have evolved providing support for an increasing number of technical and economical aspects. Applications range from the design and development of ultra highly integrated circuits to totally new man-machine interfaces, from software engineering tools to fault diagnosis systems, from decision support to even the analysis of unemployment. Following a first joint workshop on Advanced Information Processing held in July 1988 at the Institute for Problems of Informatics of the USSR Academy of Sciences (IPIAN) at Moscow, this was the second time that scientists and researchers from the USSR Academy of Sciences and Siemens AG, Corporate Research and Development, exchanged results and discussed recent advances in the field of applied computer sciences. Initiated by Prof. Dr. I. Mizin, Corresponding Member of the USSR Academy of Sciences and Director of IPIAN, and Prof. Dr. H. Schwartzel, Vice President of the Siemens AG and Head of the Applied Computer Science & Software Department, a joint symposium was arranged at the USSR Academy of Sciences in Moscow on June 5th and 6th 1990. The meetings on Information Processing and Software and Systems Design Automation provided a basis both for presentations of ongoing research and for discussions about specific problems.

Download or read book Advanced Flip Chip Packaging written by Ho-Ming Tong and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Flip Chip Packaging presents past, present and future advances and trends in areas such as substrate technology, material development, and assembly processes. Flip chip packaging is now in widespread use in computing, communications, consumer and automotive electronics, and the demand for flip chip technology is continuing to grow in order to meet the need for products that offer better performance, are smaller, and are environmentally sustainable.

Download or read book Integrated Circuit Hybrid and Multichip Module Package Design Guidelines written by Michael Pecht and published by John Wiley & Sons. This book was released on 1994-03-31 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit designers, packaging engineers, printed board fabricators, and procurement personnel will find this book's microelectronic package design-for-reliability guidelines and approaches essential for achieving their life-cycle, cost-effectiveness, and on-time delivery goals. Its uniquely organized, time-phased approach to design, development, qualification, manufacture, and in-service management shows you step-by-step how to: * Define realistic system requirements in terms of mission profile, operating life, performance expectations, size, weight, and cost * Define the system usage environment so that all operating, shipping, and storage conditions, including electrical, thermal, radiation, and mechanical loads, are assessed using realistic data * Identify potential failure modes, sites, mechanisms, and architecture-stress interactions--PLUS appropriate measures you can take to reduce, eliminate, or accommodate expected failures * Characterize materials and processes by the key controllable factors, such as types and levels of defects, variations in material properties and dimensions, and the manufacturing and assembly processes involved * Use experiment, step-stress, and accelerated methods to ensure optimum design before production begins Detailed design guidelines for substrate...wire and wire, tape automated, and flip-chip bonding...element attachment and case, lead, lead and lid seals--incorporating dimensional and geometric configurations of package elements, manufacturing and assembly conditions, materials selection, and loading conditions--round out this guide's comprehensive coverage. Detailed guidelines for substrate...wire and wire, tape automated, and flip-chip bonding...element attachment and case, lead, lead and lid seals--incorporating dimensional and geometric configurations of package elements, manufacturing and assembly conditions, materials selection, and loading conditions--round out this guide's comprehensive coverage. of related interest... PHYSICAL ARCHITECTURE OF VLSI SYSTEMS --Allan D. Kraus, Robert Hannemann and Michael Pecht For the professional engineer involved in the design and manufacture of products containing electronic components, here is a comprehensive handbook to the theory and methods surrounding the assembly of microelectronic and electronic components. The book focuses on computers and consumer electronic products with internal subsystems that reflect mechanical design constraints, cost limitations, and aesthetic and ergonomic concerns. Taking a total system approach to packaging, the book systematically examines: basic chip and computer architecture; design and layout; interassembly and interconnections; cooling scheme; materials selection, including ceramics, glasses, and metals; stress, vibration, and acoustics; and manufacturing and assembly technology. 1994 (0-471-53299-1) pp. SOLDERING PROCESSES AND EQUIPMENT --Michael G. Pecht This comprehensive, fundamentals first handbook outlines the soldering methods and techniques used in the manufacture of microelectronic chips and electronic circuit boards. In a clear, easy-to-access format, the book discusses: soldering processes and classification; the material dynamics of heat soldering when assembling differing materials; wave and reflow soldering; controlling contamination during manufacturing cleanings; techniques for assuring reliability and quality control during manufacturing; rework, repair, and manual assembly; the modern assembly / repair station; and more. The book also provides clear guidelines on assembly techniques as well as an appendix of various solder equipment manufacturers. 1993 (0-471-59167-X) 312 pp.

Download or read book Introduction to Microsystem Packaging Technology written by Yufeng Jin and published by CRC Press. This book was released on 2017-12-19 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The multi-billion-dollar microsystem packaging business continues to play an increasingly important technical role in today’s information industry. The packaging process—including design and manufacturing technologies—is the technical foundation upon which function chips are updated for use in application systems, and it is an important guarantee of the continued growth of technical content and value of information systems. Introduction to Microsystem Packaging Technology details the latest advances in this vital area, which involves microelectronics, optoelectronics, RF and wireless, MEMS, and related packaging and assembling technologies. It is purposefully written so that each chapter is relatively independent and the book systematically presents the widest possible overview of packaging knowledge. Elucidates the evolving world of packaging technologies for manufacturing The authors begin by introducing the fundamentals, history, and technical challenges of microsystems. Addressing an array of design techniques for packaging and integration, they cover substrate and interconnection technologies, examples of device- and system-level packaging, and various MEMS packaging techniques. The book also discusses module assembly and optoelectronic packaging, reliability methodologies and analysis, and prospects for the evolution and future applications of microsystems packaging and associated environmental protection. With its research examples and targeted reference questions and answers to reinforce understanding, this text is ideal for researchers, engineers, and students involved in microelectronics and MEMS. It is also useful to those who are not directly engaged in packaging but require a solid understanding of the field and its associated technologies.

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2000-08-09 with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Semiconductor Manufacturing Technology describes the individual processes and manufacturing control, support, and infrastructure technologies of silicon-based integrated-circuit manufacturing, many of which are also applicable for building devices on other semiconductor substrates. Discussing ion implantation, rapid thermal processing, photomask fabrication, chip testing, and plasma etching, the editors explore current and anticipated equipment, devices, materials, and practices of silicon-based manufacturing. The book includes a foreword by Jack S. Kilby, cowinner of the Nobel Prize in Physics 2000 "for his part in the invention of the integrated circuit."

Download or read book Low Power Design Methodologies written by Jan M. Rabaey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Power Design Methodologies presents the first in-depth coverage of all the layers of the design hierarchy, ranging from the technology, circuit, logic and architectural levels, up to the system layer. The book gives insight into the mechanisms of power dissipation in digital circuits and presents state of the art approaches to power reduction. Finally, it introduces a global view of low power design methodologies and how these are being captured in the latest design automation environments. The individual chapters are written by the leading researchers in the area, drawn from both industry and academia. Extensive references are included at the end of each chapter. Audience: A broad introduction for anyone interested in low power design. Can also be used as a text book for an advanced graduate class. A starting point for any aspiring researcher.

Download or read book Electrically Conductive Adhesives written by Rajesh Gomatam and published by BRILL. This book was released on 2008-12-23 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on two Special Issues of the Journal of Adhesion Science and Technology (JAST vol. 22, no. 8-9 and vol. 22, no. 14) dedicated to the logic of electrically conductive adhesives. The contains a total of 21 papers (reflecting overviews and original research).