Download or read book Low and Negative Thermal Expansion Materials written by David A. Woodcock and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Negative Thermal Expansion Materials written by D.J. Fisher and published by Materials Research Forum LLC. This book was released on 2018-01-15 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: In everyday life, minute thermally-induced elongations are essentially invisible to the naked eye; but even minute expansions can fatally degrade device processing and performance in – for example – the semiconductor industry. Materials which, astonishingly, contract upon heating offer the great advantage of being able to tune the overall thermal expansion of composite materials or to act as thermal-expansion compensators. The development of these negative thermal expansion materials has advanced rapidly during the past fifteen years, and a wide variety of materials of differing types has now been identified, as well as a number of intriguing mechanisms which help to avoid the apparent inviolable tendency of size to increase with temperature. The present work is the most up-to-date summary of the current range of negative thermal expansion materials and of the associated mechanisms. Negative Thermal Expansion Materials, Thermomiotic Behavior, Thermal Stress-Fracture, Thermal Expansion of Composites, Thin-Film Design, Metamaterials
Download or read book Low temperature Routes to Negative Thermal Expansion Materials in the ZrW2O Family written by Julie Colin and published by . This book was released on 2005 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low expansion Materials written by David P. Stinton and published by . This book was released on 1995 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oven-to-freezer dinnerware, space shuttle insulation, and protection tubes in the molten aluminum industry are some of the applications feeding the hunger for materials with a high dimensional stability and/or thermal shock resistance over a wide temperature range. Recent advances in the basic resea
Download or read book Negative Thermal Expansion Materials written by Wayne Miller and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural and High Pressure Studies of Some Low and Negative Thermal Expansion Materials written by Mehmet Çetinkol and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented in this thesis focuses on the structural studies and the high pressure behavior of oxide negative thermal expansion (NTE) materials that can be classified as framework materials. First two chapters were devoted to TaO2F which adopts the ReO3-type cubic structure. Our studies under pressure revealed a rather complicated high pressure behavior for this deceivingly simple compound. The diffraction measurements at variable temperature and high pressure indicated that pressure had a significant effect on the linear coefficient of thermal expansion of TaO2F. In the remainder of the thesis, compounds that belong to the Sc2W3O12 family were examined. High-pressure in-situ powder diffraction studies were conducted on Zr2WO4(PO4)2, Zr2MoO4(PO4)2, Hf2WO4(PO4)2, and Sc2W3O12 in order to investigate the effects of pressure on the coefficients of thermal expansion, existence of phase transitions, phase transition pressures and structural changes occurring upon phase transitions.
Download or read book Low Thermal Expansion Glass Ceramics written by Dieter Krause and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised edition features new sections on glass-ceramic applications and their performance, CDC-grinding, and laser gyroscopes containing Zerodur®., providing an overview of Schott's activities for scientists, engineers, and managers.
Download or read book Synthesis and Characterization of Low and Negative Thermal Expansion Materials written by Mehmet Nuri Kutukcu and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The preparation and thermophysical properties of some In(I), Ga(I) and Ag(I) substituted NZP type materials were explored. Many compositions with the NZP framework show low and negative thermal expansion. Previously reported material, GaZr2(PO4(3, transforms from one NZP related phase into another NZP type phase due to oxidation under air above 300oC. In addition, it exhibits hysteresis under inert atmosphere; the cell parameters are different on heating and cooling cycles for a given temperature. The synthesis, and characterization of a new material, InZr2(PO4)3, is outlined. It crystallizes in space group R -3 c. In addition, as GaZr2(PO4)3, it oxidizes above 300oC under air and exhibits hysteresis under inert atmosphere. Furthermore, the synthesis of AgTixZr2-x(PO4)3 solid solution compositions, their ion exchange characteristics with Ga(I) and their thermophysical properties are described. Thermal expansion anisotropy (the difference between a and c) of the solid solutions decreases as the bigger ion, Zr4+, is substituted by the smaller one, Ti4+. Thermal expansion characteristics of GaZr2(PO4)3, InZr2(PO4)3 and AgZr2(PO4)3 are compared with MZr2(PO4)3 (M = Li, Na, K, Rb, Cs). Ionic radii for Ga(I) and In(I) in a six coordinate oxygen environment were proposed.
Download or read book Thermal Expansion of Solids written by Cho Yen Ho and published by ASM International. This book was released on 1998-01-01 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a detailed examination of theory and techniques in thermal expansion of solids. Subjects include a generalized theory, estimation techniques and selected effects, temperature measurements in solids, thermal expansion by X-ray diffraction, high sensitivity expansivity measurement techniques,
Download or read book Thermal Expansion 7 written by David C. Larsen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and Characterization of Some Low and Negative Thermal Expansion Materials written by Támas Varga and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The high-pressure behavior of several negative thermal expansion materials was studied by different methods. In-situ high-pressure x-ray and neutron diffraction studies on several compounds of the orthorhombic Sc2W3O12 structure revealed an unusual bulk modulus collapse at the orthorhombic to monoclinic phase transition. In some members of the A2M3O12 family, a second phase transition and/or pressure-induced amorphization were also seen at higher pressure. The mechanism for volume contraction on compression is different from that on heating. A combined in-situ high pressure x-ray diffraction and absorption spectroscopic study has been carried out for the first time. The pressure-induced amorphization in cubic ZrW2O8 and ZrMo2O8 was studied by following the changes in the local coordination environments of the metals. A significant change in the average tungsten coordination was found in ZrW2O8, and a less pronounced change in the molybdenum coordination in ZrMo2O8 on amorphization. A kinetically frustrated phase transition to a high-pressure crystalline phase or a kinetically hindered decomposition, are likely driving forces of the amorphization. A complementary ex-situ study confirmed the greater distortion of the framework tetrahedra in ZrW2O8, and revealed a similar distortion of the octahedra in both compounds. The possibility of stabilizing the low thermal expansion high-temperature structure in AM2O7 compounds to lower temperatures through stuffing of ZrP2O7 was explored. Although the phase transition temperature was suppressed in MIxZr1-xMIIIxP2O7 compositions, the chemical modification employed was not successful in stabilizing the high-temperature structure to around room temperature. An attempt has been made to control the thermal expansion properties in materials of the (MIII0.5MV0.5)P2O7-type through the choice of the metal cations and through manipulating the ordering of the cations by different heat treatment conditions. Although controlled heat treatment resulted in only short-range cation ordering, the choice of the MIII cation had a marked effect on the thermal expansion behavior of the materials. Different grades of fluorinert were examined as pressure-transmitting media for high-pressure diffraction studies. All of the fluorinerts studied became nonhydrostatic at relatively low pressures ( -1 GPa).
Download or read book ASM Ready Reference written by Fran Cverna and published by ASM International. This book was released on 2002-01-01 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quick and easy to use source for qualified thermal properties of metals and alloys. The data tables are arranged by material hierarchy, with summary tables sorted by property value. Values are given for a range of high and low temperatures. Short technical discussions at the beginning of each chapter are designed to refresh the reader's understanding of the properties and units covered in that section
Download or read book Thermal Expansion of Technical Solids at Low Temperatures written by Robert Joseph Corruccini and published by . This book was released on 1961 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Capacity and Thermal Expansion at Low Temperatures written by T.H.K. Barron and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The birth of this monograph is partly due to the persistent efforts of the General Editor, Dr. Klaus Timmerhaus, to persuade the authors that they encapsulate their forty or fifty years of struggle with the thermal properties of materials into a book before they either expired or became totally senile. We recognize his wisdom in wanting a monograph which includes the closely linked properties of heat capacity and thermal expansion, to which we have added a little 'cement' in the form of elastic moduli. There seems to be a dearth of practitioners in these areas, particularly among physics postgraduate students, sometimes temporarily alleviated when a new generation of exciting materials are found, be they heavy fermion compounds, high temperature superconductors, or fullerenes. And yet the needs of the space industry, telecommunications, energy conservation, astronomy, medical imaging, etc. , place demands for more data and understanding of these properties for all classes of materials - metals, polymers, glasses, ceramics, and mixtures thereof. There have been many useful books, including Specific Heats at Low Tempera tures by E. S. Raja Gopal (1966) in this Plenum Cryogenic Monograph Series, but few if any that covered these related topics in one book in a fashion designed to help the cryogenic engineer and cryophysicist. We hope that the introductory chapter will widen the horizons of many without a solid state background but with a general interest in physics and materials.
Download or read book Materials Under Extreme Conditions written by A. K. Tyagi and published by Elsevier. This book was released on 2017-01-13 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Under Extreme Conditions: Recent Trends and Future Prospects analyzes the chemical transformation and decomposition of materials exposed to extreme conditions, such as high temperature, high pressure, hostile chemical environments, high radiation fields, high vacuum, high magnetic and electric fields, wear and abrasion related to chemical bonding, special crystallographic features, and microstructures. The materials covered in this work encompass oxides, non-oxides, alloys and intermetallics, glasses, and carbon-based materials. The book is written for researchers in academia and industry, and technologists in chemical engineering, materials chemistry, chemistry, and condensed matter physics. Describes and analyzes the chemical transformation and decomposition of a wide range of materials exposed to extreme conditions Brings together information currently scattered across the Internet or incoherently dispersed amongst journals and proceedings Presents chapters on phenomena, materials synthesis, and processing, characterization and properties, and applications Written by established researchers in the field
Download or read book New Materials Related to the Negative Thermal Expansion written by Angus P. Wilkinson and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Metamaterials with Negative Parameters written by Teik-Cheng Lim and published by Springer Nature. This book was released on 2020-07-23 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses bulk solids that derive their mechanical properties not from those of their base materials, but from their designed microstructures. Focusing on the negative mechanical properties, it addresses topics that reveal the counter-intuitive nature of solids, specifically the negativity of properties that are commonly positive, such as negative bulk modulus, negative compressibility, negative hygroexpansion, negative thermal expansion, negative stiffness phase, and negative Poisson’s ratio. These topics are significant not only due to the curiosity they have sparked, but also because of the possibility of designing materials and structures that can behave in ways that are not normally expected in conventional solids, and as such, of materials that can outperform solids and structures made from conventional materials. The book includes illustrations to facilitate learning, and, where appropriate, reference tables. The presentation is didactic, starting with simple cases, followed by increasingly complex ones. It provides a solid foundation for graduate students, and a valuable resource for practicing materials engineers seeking to develop novel materials through the judicious design of microstructures and their corresponding mechanisms.
