Download or read book Long term Performance of Polymer Concrete for Bridge Decks written by David W. Fowler and published by Transportation Research Board. This book was released on 2011 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 423: Long-Term Performance of Polymer Concrete for Bridge Decks addresses a number of topics related to thin polymer overlays (TPOs). Those topics include previous research, specifications, and procedures on TPOs; performance of TPOs based on field applications; the primary factors that influence TPO performance; current construction guidelines for TPOs related to surface preparation, mixing and placement, consolidation, finishing, and curing; repair procedures; factors that influence the performance of overlays, including life-cycle cost, benefits and costs, bridge deck condition, service life extension, and performance; and successes and failures of TPOs, including reasons for both.
Download or read book Rethinking Bridge Deck Longevity and Maintenance with Portland Cement Polymer Concrete written by Andrew P. Agosto and published by . This book was released on 2008 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge deck deterioration in the northern Midwest creates significant costs to state Departments of Transportation (DOT's) in the region. The fundamental cause of the problem is low tensile strength and water permeable reinforced concrete resulting in deck cracking and ultimately reinforcing bar corrosion. Portland Cement Polymer Concrete (PCPC) combined with a design approach tailored to its advantages could virtually eliminate early deck deterioration and the associated costs providing an alternative asset management path for bridge decks. Bridge decks would no longer have to be removed from their substructure every fifteen years and replaced. The results would be higher quality, longer lasting bridge decks with lower life cycle costs. This project will demonstrate the feasibility and methodology of such a strategy. This project will develop a strategy that combines innovative concrete materials, novel design and cost analysis that enhances the longevity and reduces the life cycle cost of highway bridge decks. The project is expected to show significant life-cycle cost advantages to using a high performance bridge deck material.
Download or read book International Congress on Polymers in Concrete ICPIC 2018 written by Mahmoud M. Reda Taha and published by Springer. This book was released on 2018-04-06 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the proceedings from the International Congress of Polymers in Concrete 2018 (ICPIC), held under the theme “Polymers for Resilient and Sustainable Concrete Infrastructure.” ICPIC 2018 provides an opportunity for researchers and specialists working in the fields of polymers to exchange ideas and follow the latest progress in the use of polymers in concrete infrastructure. It also showcases the use of polymers and polymer concrete in sustainable and resilient development, and provides a platform for local and overseas suppliers, developers, manufacturers and contractors using polymers, polymer concrete and polymer composites in concrete structures to develop new business opportunities and follow the latest developments in the field. The International Congress of Polymers in Concrete is an international forum that has taken place every three years for the last 40 years with the objective of following progress in the field of polymers and their use in concrete and construction. Following 15 successful congresses held in London (1975), Austin (1978), Koriyama (1981), Darmstadt (1984), Brighton (1987), Shanghai (1990), Moscow (1992), Oostende (1995), Bologna (1998), Honolulu (2001), Berlin (2004), Chuncheon (2007), Funchal (2010), Shanghai (2013) and Singapore (2015), the 16th ICPIC will take place in Washington, DC, from April 29 to May 1st, 2018.
Download or read book Proceedings of the 1st Conference of the European Association on Quality Control of Bridges and Structures written by Carlo Pellegrino and published by Springer Nature. This book was released on 2021-12-11 with total page 1454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances and innovations in the field of quality control and improvement of bridges and structures, as presented by international researchers and engineers at the 1st Conference of the European Association on Quality Control of Bridges and Structures (EUROSTRUCT 2021), held in Padua, Italy on August 29 – September 1, 2021. Contributions include a wide range of topics such as testing and advanced diagnostic techniques for damage detection; SHM and AI, IoT and machine learning for data analysis of bridges and structures; fiberoptics and smart sensors for long-term SHM; structural reliability, risk, robustness, redundancy and resilience for bridges; corrosion models, fatigue analysis and impact of hazards on infrastructure components; bridge and asset management systems, and decision-making models; Life-Cycle Analysis, retrofit and service-life extension, risk management protocols; quality control plans, sustainability and green materials.
Download or read book Progress in Polymers in Concrete written by Ru Wang and published by Trans Tech Publications Ltd. This book was released on 2013-04-24 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Concrete-polymer composites have attracted peoples attention in many industries for their excellent physical and mechanical properties and durability. The peer reviewed paper in this special volume cover the following topics: materials, mix proportion design and properties of concrete-polymer composites; their characterization methods, their application and other special aspects. In these papers the authors are trying to answer what is essential in concrete-polymer composites, how to make it better for the given project and how to eventually achieve sustainable building materials.
Download or read book Rethinking Bridge Deck Longevity and Maintenence with Portland Cement Polymer Concrete written by Andrew P. Agosto and published by . This book was released on 2008 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Concrete Overlay Test Program written by Oregon. State Highway Division and published by . This book was released on 1974 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes work done on various combinations of monomers and polymer concrete mixes and identifies the mixes showing the greatest potential for use in bridge deck overlays. Presented are test results showing physical properties of various polymer concrete mixes, such as compressive strength, split tensile strength, modulus of elasticity, thermal coefficient of expansion, and shrinkage coefficient. The effects of polymer content, work time, and temperature on various properties are also discussed. The development of two polymer concrete systems with excellent membrane potential are described along with the details of bonding characteristics of several systems. Finally, a polymer concrete mix with suitable properties for deck and pavement patching is detailed.
Download or read book High Performance Concrete Bridge Decks A Fast Track Implementation Study Volume 2 Materials written by Mateusz Radlinski and published by Purdue University Press. This book was released on 2008-11-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this research was to examine the applicability of ternary binder systems containing ordinary portland cement (OPC), class C fly ash (FA) and silica fume (SF) for bridge deck concrete. This was accomplished in two parts, the laboratory part and a field application part. During the laboratory studies, four ternary mixtures, each containing either 20% or 30% FA and either 5% or 7% SF were subjected to four different curing regimes (air drying, 7 days curing compound application and 3 or 7 days wet burlap curing). In general, all four ternary mixtures exhibited very good water and chloride solution transport-controlling properties (resistance to chloride-ion penetration, chloride diffusivity and rate of water absorption). However, it was concluded that in order to ensure adequate strength, good freezing and thawing resistance, satisfactory resistance to salt scaling, and adequate shrinkage cracking resistance the FA content should not exceed 20%, SF content should not exceed 5% (by total mass of binder) and paste content should be kept below 24% by volume of concrete. Further, wet burlap curing for a minimum of 3 days was required to achieve satisfactory performance and to obtain a reliable assessment of in-situ compressive strength (up to 28 days) using maturity method. The second part of this research examined the performance of ternary concrete containing 20% FA and 5% SF in the pilot HPC bridge deck constructed in northern Indiana. Using maturity method developed for the purpose of this study, it was determined that the unexpectedly high RCP values of concrete placed late in the construction season were mostly attributed to low ambient temperature. Additional applications of the developed maturity method were also demonstrated. These include assessment of risk of scaling and reduction in time to corrosion initiation as a function of construction date, as well as estimation of long-term RCP values of concrete subjected to accelerated curing.
Download or read book Applications of Polymer Concrete written by David W. Fowler and published by . This book was released on 1981 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Bridge Deck Performance written by H. G. Russell and published by Transportation Research Board. This book was released on 2004 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: At head of title: National Cooperative Highway Research Program.
Download or read book Federally Coordinated Program of Highway Research Development and Technology written by and published by . This book was released on 1983 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development and Application of Bituminous Materials for Civil Infrastructures written by Hui Yao and published by Frontiers Media SA. This book was released on 2021-10-22 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federally Coordinated Program of Highway Research Development and Technology Annual Progress Report Fiscal Year 1985 written by and published by . This book was released on 1986 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Infrastructure Health in Civil Engineering Two Volume Set written by Mohammed M. Ettouney and published by CRC Press. This book was released on 2022-01-18 with total page 1320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set discusses the importance of linking the decision making concept to damage identification and structural modeling. It examines the process of addressing and maintaining structural health, including measurements, structural identification, and damage identification and discusses the theoretical and practical issues involved for each aspect. Emphasizing state-of-the-art practice as well as future directions, this text also features numerous practical case studies and covers the latest techniques in sensing and sensor utilization.
Download or read book Polymer Impregnation of New Concrete Bridge Deck Surfaces written by W. Glenn Smoak and published by . This book was released on 1978 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Infrastructure Health in Civil Engineering written by Mohammed M. Ettouney and published by CRC Press. This book was released on 2011-09-27 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continually increasing demands on infrastructures mean that maintenance and renewal require timely, appropriate action that maximizes benefits while minimizing cost. To be as well informed as possible, decision-makers must have an optimal understanding of an infrastructure’s condition—what it is now, and what it is expected to be in the future. Written by two highly respected engineers, the second volume, Infrastructure Health in Civil Engineering: Applications and Management, integrates the decision making concept into theoretical and practical issues. It covers: State-of-the-art practice and future directions Use of probability and statistics in areas including structural modeling Specific practical applications, including retrofitting and rehabilitation in response to earthquake damage, corrosion, fatigue, and bridge security Use of IHCE for management and maintenance of different types of structures using pre-stressed and reinforced concrete, and fiber-reinforced polymers (FRPs) Numerous practical case studies, as well as coverage of the latest techniques in the use of sensors for damage detection and load testing Built to correspond to the ideas presented in its companion volume, Theory and Components, this is an invaluable guide to optimized, cost-saving methods that will help readers meet safety specifications for new projects, as well as the aging infrastructure at great risk of failure.
Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites Puts a specific focus on viscoelastic and viscoplastic modeling Features the time-temperature-age superposition principle for predicting long-term response Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases
