Download or read book Logic Synthesis for FSM Based Control Units written by Alexander Barkalov and published by Springer Science & Business Media. This book was released on 2009-11-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the hardware implementation of control algorithms represented by graph-schemes of algorithm. It includes new methods of logic synthesis and optimization for logic circuits of Mealy and Moore FSMs oriented on both ASIC and FPLD.

Download or read book Logic Synthesis for FPGA Based Control Units written by Alexander Barkalov and published by Springer Nature. This book was released on 2020-01-08 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on control units, which are a vital part of modern digital systems, and responsible for the efficiency of controlled systems. The model of a finite state machine (FSM) is often used to represent the behavior of a control unit. As a rule, control units have irregular structures that make it impossible to design their logic circuits using the standard library cells. Design methods depend strongly on such factors as the FSM used, specific features of the logic elements implemented in the FSM logic circuit, and the characteristics of the control algorithm to be interpreted. This book discusses Moore and Mealy FSMs implemented with FPGA chips, including look-up table elements (LUT) and embedded memory blocks (EMB). It is crucial to minimize the number of LUTs and EMBs in an FSM logic circuit, as well as to make the interconnections between the logic elements more regular, and various methods of structural decompositions can be used to solve this problem. These methods are reduced to the presentation of an FSM circuit as a composition of different logic blocks, the majority of which implement systems of intermediate logic functions different (and much simpler) than input memory functions and FSM output functions. The structural decomposition results in multilevel FSM circuits having fewer logic elements than equivalent single-level circuits. The book describes well-known methods of structural decomposition and proposes new ones, examining their impact on the final amount of hardware in an FSM circuit. It is of interest to students and postgraduates in the area of Computer Science, as well as experts involved in designing digital systems with complex control units. The proposed models and design methods open new possibilities for creating logic circuits of control units with an optimal amount of hardware and regular interconnections.

Download or read book Logic Synthesis for Compositional Microprogram Control Units written by Alexander Barkalov and published by Springer Science & Business Media. This book was released on 2008-07-17 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the very important parts of any digital system is the control unit, coordin- ing interplay of other system blocks. As a rule, control units have irregular str- ture, which makes process of their logic circuits design very sophisticated. In case of complex logic controllers, the problem of system design is reduced practically to the design of control units. Actually, we observe a real technical boom connected with achievements in semiconductor technology. One of these is the development of integrated circuit known as the "systems-on-a-programmable- chip" (SoPC), where the number of elements approaches one billion. Because of the extreme complexity of microchips, it is very important to develop effective design methods oriented on particular properties of logical elements. Solution of this problem permits impr- ing functional capabilities of the target digital system inside single SoPC chip. As majority of researches point out, design methods used in case of industrial packages are, in case of complex digital system design, far from optimal. Similar problems concern the design of control units with standard ?eld-programmable logic devices (FPLD), such as PLA, PAL, GAL, CPLD, and FPGA. Let us point out that modern SoPC are based on CPLD or FPGA technology. Thus, the development of eff- tive design methods oriented on FPLD implementation of logic circuits used in the control units still remains the problem of great importance.

Download or read book Logic Synthesis for Finite State Machines Based on Linear Chains of States written by Alexander Barkalov and published by Springer. This book was released on 2017-06-24 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses Moore finite state machines (FSMs) implemented with field programmable gate arrays (FPGAs) including look-up table (LUT) elements and embedded memory blocks (EMBs). To minimize the number of LUTs in FSM logic circuits, the authors propose replacing a state register with a state counter. They also put forward an approach allowing linear chains of states to be created, which simplifies the system of input memory functions and, therefore, decreases the number of LUTs in the resulting FSM circuit. The authors combine this approach with using EMBs to implement the system of output functions (microoperations). This allows a significant decrease in the number of LUTs, as well as eliminating a lot of interconnections in the FSM logic circuit. As a rule, it also reduces the area occupied by the circuit and diminishes the resulting power dissipation. This book is an interesting and valuable resource for students and postgraduates in the area of computer science, as well as for designers of digital systems that included complex control units

Download or read book Logic Synthesis for FPGA Based Finite State Machines written by Alexander Barkalov and published by Springer. This book was released on 2015-10-15 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses control units represented by the model of a finite state machine (FSM). It contains various original methods and takes into account the peculiarities of field-programmable gate arrays (FPGA) chips and a FSM model. It shows that one of the peculiarities of FPGA chips is the existence of embedded memory blocks (EMB). The book is devoted to the solution of problems of logic synthesis and reduction of hardware amount in control units. The book will be interesting and useful for researchers and PhD students in the area of Electrical Engineering and Computer Science, as well as for designers of modern digital systems.

Download or read book Logic Synthesis for VLSI Based Combined Finite State Machines written by Alexander Barkalov and published by Springer Nature. This book was released on 2022-11-24 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to design and optimization of control units represented by combined finite state machines (CFSMs). The CFSMs combine features of both Mealy and Moore FSMs. Having states of Moore FSM, they produce output signals of both Mealy and Moore types. To optimize the circuits of CFSMs, we propose to use optimization methods targeting both Mealy and Moore FSMs. The book contains some original synthesis and optimization methods targeting hardware reduction in VLSI-based CFSM circuits. These methods take into account the peculiarities of both a CFSM model and a VLSI chip in use. The optimization is achieved due to combining classical optimization methods with new methods proposed in this book. These new methods are a mixed encoding of collections of microoperations and a twofold state assignment in CFSMs. All proposed methods target reducing the numbers of arguments in systems of Boolean functions representing CFSM circuits. Also, we propose to use classes of pseudoequivalent states of Moore FSMs to reduce the number of product terms in these systems.The book includes a lot of examples which contributes to a better understanding of the features of the synthesis methods under consideration. This is the first book entirely devoted to the problems associated with synthesis and optimization of VLSI-based CFSMs. We hope that the book will be interesting and useful for students and PhD students in the area of Computer Science, as well as for designers of various digital systems. We think that proposed CFSM models enlarge the class of models applied for implementation of control units with modern VLSI chips.

Download or read book Foundations of Embedded Systems written by Alexander Barkalov and published by Springer. This book was released on 2019-02-04 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to embedded systems (ESs), which can now be found in practically all fields of human activity. Embedded systems are essentially a special class of computing systems designed for monitoring and controlling objects of the physical world. The book begins by discussing the distinctive features of ESs, above all their cybernetic-physical character, and how they can be designed to deliver the required performance with a minimum amount of hardware. In turn, it presents a range of design methodologies. Considerable attention is paid to the hardware implementation of computational algorithms. It is shown that different parts of complex ESs could be implemented using models of finite state machines (FSMs). Also, field-programmable gate arrays (FPGAs) are very often used to implement different hardware accelerators in ESs. The book pays considerable attention to design methods for FPGA-based FSMs, before the closing section turns to programmable logic controllers widely used in industry. This book will be interesting and useful for students and postgraduates in the area of Computer Science, as well as for designers of embedded systems. In addition, it offers a good point of departure for creating embedded systems for various spheres of human activity.

Download or read book Design of Reconfigurable Logic Controllers written by Andrei Karatkevich and published by Springer. This book was released on 2015-12-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the original concepts and modern techniques for specification, synthesis, optimisation and implementation of parallel logical control devices. It deals with essential problems of reconfigurable control systems like dependability, modularity and portability. Reconfigurable systems require a wider variety of design and verification options than the application-specific integrated circuits. The book presents a comprehensive selection of possible design techniques. The diversity of the modelling approaches covers Petri nets, state machines and activity diagrams. The preferences of the presented optimization and synthesis methods are not limited to increasing of the efficiency of resource use. One of the biggest advantages of the presented methods is the platform independence, the FPGA devices and single board computers are some of the examples of possible platforms. These issues and problems are illustrated with practical cases of complete control systems. If you expect a new look at the reconfigurable systems designing process or need ideas for improving the quality of the project, this book is a good choice.g process or need ideas for improving the quality of the project, this book is a good choice.

Download or read book Prototyping of Concurrent Control Systems Implemented in FPGA Devices written by Remigiusz Wiśniewski and published by Springer. This book was released on 2016-09-30 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on prototyping aspects of concurrent control systems and their further implementation and partial reconfiguration in programmable devices. Further, it lays out a full prototyping flow for concurrent control systems. Based on a given primary specification, a system is described with an interpreted Petri net, which naturally reflects the concurrent and sequential relationships of the design. The book shows that, apart from the traditional option of static configuration of the entire system, the latest programmable devices (especially FPGAs) offer far more sophistication. Partial reconfiguration allows selected parts of the system to be replaced without having to reprogram the entire structure of the device. Approaches to dynamic and static partial reconfiguration of concurrent control systems are presented and described in detail.“/p> The theoretical work is illustrated by examples drawn from various applications, with a milling machine and a traffic-light controller highlighted as representative interpreted Petri nets. Given the ubiquity of concurrent control systems in a huge variety of technological areas including transportation, medicine, artificial intelligence, manufacturing, security and safety and planetary exploration, the innovative software and hardware design methods described here will be of considerable interest to control engineers and systems and circuits researchers in many areas of industry and academia.

Download or read book Innovative Technologies in Management and Science written by Ryszard Klempous and published by Springer. This book was released on 2014-12-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This carefully edited book presents recent research in Innovative Technologies in Management and Science, representing a widely spread interdisciplinary research area with many applications in various disciplines including engineering, medicine, technology, or environment, among others. It consists of eleven invited and scholarly edited chapters written by respectable researchers and experts in the fields that integrate ideas and novel concepts in Intelligent Systems and Informatics. Most of the chapters were selected from the initial contributions to the World of Innovation Conference held on April 3, 2012 in Wroclaw, Poland. The contributions are focusing on research and development of the latest IT technologies, in the field of Cloud Computing, IT modeling, as well as optimization problems. The chapters presented can be grouped into three categories: Innovation supported by Clouds Technology, Innovation proposals in management area, and Theoretical refinement for innovative solutions.

Download or read book Synthesis and Optimization of FPGA Based Systems written by Valery Sklyarov and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is composed of two parts. The first part introduces the concepts of the design of digital systems using contemporary field-programmable gate arrays (FPGAs). Various design techniques are discussed and illustrated by examples. The operation and effectiveness of these techniques is demonstrated through experiments that use relatively cheap prototyping boards that are widely available. The book begins with easily understandable introductory sections, continues with commonly used digital circuits, and then gradually extends to more advanced topics. The advanced topics include novel techniques where parallelism is applied extensively. These techniques involve not only core reconfigurable logical elements, but also use embedded blocks such as memories and digital signal processing slices and interactions with general-purpose and application-specific computing systems. Fully synthesizable specifications are provided in a hardware-description language (VHDL) and are ready to be tested and incorporated in engineering designs. A number of practical applications are discussed from areas such as data processing and vector-based computations (e.g. Hamming weight counters/comparators). The second part of the book covers the more theoretical aspects of finite state machine synthesis with the main objective of reducing basic FPGA resources, minimizing delays and achieving greater optimization of circuits and systems.

Download or read book Multimedia and Ubiquitous Engineering written by James J. (Jong Hyuk) Park and published by Springer Science & Business. This book was released on 2014-04-16 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aims of these proceedings are to provide a complete coverage of the areas outlined, and to bring together researchers from academic and industry to share ideas, challenges, and solutions relating to the multifaceted aspects of this field. New multimedia standards (for example, MPEG-21) facilitate the seamless integration of multiple modalities into interoperable multimedia frameworks, transforming the way people work and interact with multimedia data. These key technologies and multimedia solutions interact and collaborate with each other in increasingly effective ways, contributing to the multimedia revolution and having a significant impact across a wide spectrum of consumer, business, healthcare, education, and governmental domains.

Download or read book Proceedings of Sixth International Congress on Information and Communication Technology written by Xin-She Yang and published by Springer Nature. This book was released on 2021-10-26 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected high-quality research papers presented at the Sixth International Congress on Information and Communication Technology, held at Brunel University, London, on February 25–26, 2021. It discusses emerging topics pertaining to information and communication technology (ICT) for managerial applications, e-governance, e-agriculture, e-education and computing technologies, the Internet of Things (IoT) and e-mining. Written by respected experts and researchers working on ICT, the book offers a valuable asset for young researchers involved in advanced studies. The book is presented in four volumes.

Download or read book Computer Information Systems and Industrial Management written by Khalid Saeed and published by Springer. This book was released on 2017-05-16 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 16th IFIP TC8 International Conference on Computer Information Systems and Industrial Management, CISIM 2017, held in Bialystok, Poland, in June 2017. The 60 regular papers presented together with 5 keynotes were carefully reviewed and Selected from 85 submissions. They are organized in the following topical sections: algorithms; biometrics and pattern recognition applications; data analysis and information retrieval; engineering of enterprise software products; industrial management and other applications; modelling and optimization; various aspects of computer security.

Download or read book Advanced Techniques for Embedded Systems Design and Test written by Juan C. López and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: As electronic technology reaches the point where complex systems can be integrated on a single chip, and higher degrees of performance can be achieved at lower costs, designers must devise new ways to undertake the laborious task of coping with the numerous, and non-trivial, problems that arise during the conception of such systems. On the other hand, shorter design cycles (so that electronic products can fit into shrinking market windows) put companies, and consequently designers, under pressure in a race to obtain reliable products in the minimum period of time. New methodologies, supported by automation and abstraction, have appeared which have been crucial in making it possible for system designers to take over the traditional electronic design process and embedded systems is one of the fields that these methodologies are mainly targeting. The inherent complexity of these systems, with hardware and software components that usually execute concurrently, and the very tight cost and performance constraints, make them specially suitable to introduce higher levels of abstraction and automation, so as to allow the designer to better tackle the many problems that appear during their design. Advanced Techniques for Embedded Systems Design and Test is a comprehensive book presenting recent developments in methodologies and tools for the specification, synthesis, verification, and test of embedded systems, characterized by the use of high-level languages as a road to productivity. Each specific part of the design process, from specification through to test, is looked at with a constant emphasis on behavioral methodologies. Advanced Techniques for Embedded Systems Design and Test is essential reading for all researchers in the design and test communities as well as system designers and CAD tools developers.

Download or read book FSM based Digital Design using Verilog HDL written by Peter Minns and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: As digital circuit elements decrease in physical size, resulting in increasingly complex systems, a basic logic model that can be used in the control and design of a range of semiconductor devices is vital. Finite State Machines (FSM) have numerous advantages; they can be applied to many areas (including motor control, and signal and serial data identification to name a few) and they use less logic than their alternatives, leading to the development of faster digital hardware systems. This clear and logical book presents a range of novel techniques for the rapid and reliable design of digital systems using FSMs, detailing exactly how and where they can be implemented. With a practical approach, it covers synchronous and asynchronous FSMs in the design of both simple and complex systems, and Petri-Net design techniques for sequential/parallel control systems. Chapters on Hardware Description Language cover the widely-used and powerful Verilog HDL in sufficient detail to facilitate the description and verification of FSMs, and FSM based systems, at both the gate and behavioural levels. Throughout, the text incorporates many real-world examples that demonstrate designs such as data acquisition, a memory tester, and passive serial data monitoring and detection, among others. A useful accompanying CD offers working Verilog software tools for the capture and simulation of design solutions. With a linear programmed learning format, this book works as a concise guide for the practising digital designer. This book will also be of importance to senior students and postgraduates of electronic engineering, who require design skills for the embedded systems market.

Download or read book Embedded Microprocessor Systems written by Christian Müller-Schloer and published by IOS Press. This book was released on 1996 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded microprocessor systems are affecting our daily lives at a fast pace, mostly unrecognised by the general public. Most of us are aware of the part they are playing in increasing business efficiency through office applications such as personal computers, printers and copiers. Only a few people, however, fully appreciate the growing role of embedded systems in telecommunications and industrial environments, or even in everyday products like cars and home appliances. The challenge to engineers and managers is not only highlighted by the sheer size of the market, ' 1.5 billion microcontrollers and microprocessors are produced every year ' but also by the accelerating innovation in embedded systems towards higher complexity in hardware, software and tools as well as towards higher performance and lower consumption. To maintain competitiveness in this demanding environment, an optimum mix of innovation, time to market and system cost is required. Choosing the right options and strategies for products and companies is crucial and rarely obvious. In this book the editors have, therefore, skilfully brought together more than fifty contributions from some of the leading authorities in embedded systems. The papers are conveniently grouped in four sections.