Download or read book Drilled Shaft Design and Construction Guidelines Manual written by Lymon C. Reese and published by . This book was released on 1977 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drilled Shafts written by National Highway Institute (U.S.) and published by . This book was released on 1988 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.
Download or read book Drilled Shaft Manual Construction procedures and design for axial loading written by Lymon C. Reese and published by . This book was released on 1977 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drilled shafts have been used on a limited scale for many years as an alternative to driven piles in a variety of foundation problems. However, uncertainty about the behavior of the drilled shaft has forestalled widespread adoption. The subject package, by Dr. Lymon C. Reese of the University of Texas, is intended for use by bridge engineers, geotechnical engineers, and builders of pile foundations. The manual contains rational procedures and practical guidelines for the design and construction of drilled shaft foundations. Volume I presents a rational design procedure for drilled shafts under axial loading and includes guidelines on construction methods, inspection, load testing, specifications, and cost estimates. Volume II presents alternative methods for computing the response of the shaft to lateral loading and presents the structural design of the shaft for axial and/or lateral loading.
Download or read book Drilled Shaft Design and Construction Guidelines Manual Reese L C and Allen J D Structural analysis and design for lateral loading written by Lymon C. Reese and published by . This book was released on 1977 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drilled Shaft Design and Construction Guidelines Manual Construction procedures and design for axial loading written by Lymon C. Reese and published by . This book was released on 1977 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2023-01-27 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century." This second volume includes sections covering substructure design and seismic design.
Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Shallow and Deep Foundations written by Lymon C. Reese and published by John Wiley & Sons. This book was released on 2005-11-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-of-a-kind coverage on the fundamentals of foundation analysis and design Analysis and Design of Shallow and Deep Foundations is a significant new resource to the engineering principles used in the analysis and design of both shallow and deep, load-bearing foundations for a variety of building and structural types. Its unique presentation focuses on new developments in computer-aided analysis and soil-structure interaction, including foundations as deformable bodies. Written by the world's leading foundation engineers, Analysis and Design of Shallow and Deep Foundations covers everything from soil investigations and loading analysis to major types of foundations and construction methods. It also features: * Coverage on computer-assisted analytical methods, balanced with standard methods such as site visits and the role of engineering geology * Methods for computing the capacity and settlement of both shallow and deep foundations * Field-testing methods and sample case studies, including projects where foundations have failed, supported with analyses of the failure * CD-ROM containing demonstration versions of analytical geotechnical software from Ensoft, Inc. tailored for use by students in the classroom
Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world. This second edition of the bestselling Bridge Engineering Handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format. An abundance of worked-out examples gives readers numerous practical step-by-step design procedures. Special attention is given to rehabilitation, retrofit, and maintenance. Coverage also includes seismic design and building materials. Thoroughly revised and updated, this second edition contains 26 new chapters.
Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: With chapters culled from the acclaimed Bridge Engineering Handbook, Bridge Engineering: Substructure Design focuses on the various components comprising and affecting bridge substructures. These include bearings, piers and columns, towers, abutments and retaining structures, footings and foundations, and bridge hydraulics. For each component, the
Download or read book Deep Foundations on Bored and Auger Piles BAP III written by W. Haegeman and published by CRC Press. This book was released on 2020-09-29 with total page 1063 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents findings from the 3rd International Geotechnical Seminar, held in Ghent, Belgium. Topics include: American experiences with large diameter bored piles; case histories; static, dynamic and pile integrity testing; and installation parameters and capacity of screwed piles.
Download or read book Bridge Engineering Handbook Second Edition written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations and photos. The book covers new, innovative and traditional methods and practices; explores rehabilitation, retrofit, and maintenance; and examines seismic design and building materials. The third book, Substructure Design, contains 11 chapters addressing the various substructure components. What’s New in the Second Edition: • Includes new chapter: Landslide Risk Assessment and Mitigation • Rewrites the Shallow Foundation chapter • Rewrites the Geotechnical Consideration chapter and retitles it as: Ground Investigation • Updates the Abutments and Retaining Structures chapter and divides it into two chapters: Abutments and Earth Retaining Structures This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.
Download or read book An Experimental Investigation Into the Uplift Capacity of Drilled Shaft Foundations in Cohesionless Soils written by James Pirtle Stewart and published by . This book was released on 1981 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behavior of Three Instrumented Drilled Shafts Under Short Term Axial Loading written by Donald E. Engeling and published by . This book was released on 1974 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conduct and Interpretation of Load Tests on Drilled Shaft Foundations Detailed guidelines written by Anwar Hirany and published by . This book was released on 1988 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Drilled Shaft Foundations in Uplift written by Fred H. Kulhawy and published by . This book was released on 1981 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the Geotechnical Engineering Division written by American Society of Civil Engineers. Geotechnical Engineering Division and published by . This book was released on 1979 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
