Download or read book Load Reducing Control for Wind Turbines written by Martin Shan and published by BoD – Books on Demand. This book was released on 2022-09-19 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: In wind turbine engineering, it is a well-known fact that mechanical loading of the structural components, as tower and blades, can be heavily influenced by means of control. This work provides a comprehensive discussion on systematic control design for active load reduction. A review of the established approaches for load reducing pitch control is given. The basic idea is to adjust the blade pitch angles to provide active damping of structural loads or to compensate for periodic load components. A survey on rating and cost of wind turbine structural components is given to sketch the potential impacts of control design on Cost-of-Energy. Special focus in a separate chapter is given to the major trade-off between load reductions and rating of the pitch actuator system. In the main part, a pragmatic approach to systematic control design by use of modern multi-variable control design methods is introduced. Linear models in combination with disturbance spectra are applied to allow for fast and transparent optimization of the controllers. Exemplarily, this hierarchical control design / controller tuning approach is demonstrated for two different types of load reducing pitch controllers.
Download or read book Blade Pitch Control for Wind Turbine Load Reductions written by Wai Hou (Alan) Lio and published by Springer. This book was released on 2018-03-01 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the use of blade-pitch control and real-time wind measurements to reduce the structural loads on the rotors and blades of wind turbines. The first part of the thesis studies the main similarities between the various classes of current blade-pitch control strategies, which have to date remained overlooked by mainstream literature. It also investigates the feasibility of an estimator design that extracts the turbine tower motion signal from the blade load measurements. In turn, the second part of the thesis proposes a novel model predictive control layer in the control architecture that enables an existing controller to incorporate the upcoming wind information and constraint-handling features. This thesis provides essential clarifications of and systematic design guidelines for these topics, which can benefit the design of wind turbines and, it is hoped, inspire the development of more innovative mechanical load-reduction solutions in the field of wind energy.
Download or read book Gain Scheduling Pitch Control for Fatigue Load Reduction for Wind Turbines written by Weiwei Shan and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work investigates several methods for the design of a pitch control system, which actively reduces the fatigue loads on the tower of a wind turbine. As major contribution, this work demonstrates that it is possible to design collective pitch controllers that, additionally to basic rotor speed control and active damping of the first fore-aft tower bending mode, allow to reduce the fore-aft tower bending loads due to 3p harmonic excitation.
Download or read book Modeling and Modern Control of Wind Power written by Qiuwei Wu and published by John Wiley & Sons. This book was released on 2018-02-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential reference to the modeling techniques of wind turbine systems for the application of advanced control methods This book covers the modeling of wind power and application of modern control methods to the wind power control—specifically the models of type 3 and type 4 wind turbines. The modeling aspects will help readers to streamline the wind turbine and wind power plant modeling, and reduce the burden of power system simulations to investigate the impact of wind power on power systems. The use of modern control methods will help technology development, especially from the perspective of manufactures. Chapter coverage includes: status of wind power development, grid code requirements for wind power integration; modeling and control of doubly fed induction generator (DFIG) wind turbine generator (WTG); optimal control strategy for load reduction of full scale converter (FSC) WTG; clustering based WTG model linearization; adaptive control of wind turbines for maximum power point tracking (MPPT); distributed model predictive active power control of wind power plants and energy storage systems; model predictive voltage control of wind power plants; control of wind power plant clusters; and fault ride-through capability enhancement of VSC HVDC connected offshore wind power plants. Modeling and Modern Control of Wind Power also features tables, illustrations, case studies, and an appendix showing a selection of typical test systems and the code of adaptive and distributed model predictive control. Analyzes the developments in control methods for wind turbines (focusing on type 3 and type 4 wind turbines) Provides an overview of the latest changes in grid code requirements for wind power integration Reviews the operation characteristics of the FSC and DFIG WTG Presents production efficiency improvement of WTG under uncertainties and disturbances with adaptive control Deals with model predictive active and reactive power control of wind power plants Describes enhanced control of VSC HVDC connected offshore wind power plants Modeling and Modern Control of Wind Power is ideal for PhD students and researchers studying the field, but is also highly beneficial to engineers and transmission system operators (TSOs), wind turbine manufacturers, and consulting companies.
Download or read book Offshore Wind Energy Technology written by Olimpo Anaya-Lara and published by John Wiley & Sons. This book was released on 2018-05-11 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: A COMPREHENSIVE REFERENCE TO THE MOST RECENT ADVANCEMENTS IN OFFSHORE WIND TECHNOLOGY Offshore Wind Energy Technology offers a reference based on the research material developed by the acclaimed Norwegian Research Centre for Offshore Wind Technology (NOWITECH) and material developed by the expert authors over the last 20 years. This comprehensive text covers critical topics such as wind energy conversion systems technology, control systems, grid connection and system integration, and novel structures including bottom-fixed and floating. The text also reviews the most current operation and maintenance strategies as well as technologies and design tools for novel offshore wind energy concepts. The text contains a wealth of mathematical derivations, tables, graphs, worked examples, and illustrative case studies. Authoritative and accessible, Offshore Wind Energy Technology: Contains coverage of electricity markets for offshore wind energy and then discusses the challenges posed by the cost and limited opportunities Discusses novel offshore wind turbine structures and floaters Features an analysis of the stochastic dynamics of offshore/marine structures Describes the logistics of planning, designing, building, and connecting an offshore wind farm Written for students and professionals in the field, Offshore Wind Energy Technology is a definitive resource that reviews all facets of offshore wind energy technology and grid connection.
Download or read book Assessment of Research Needs for Wind Turbine Rotor Materials Technology written by Committee on Assessment of Research Needs for Wind Turbine Rotor Materials Technology and published by National Academies Press. This book was released on 1991-01-15 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind-driven power systems represent a renewable energy technology. Arrays of interconnected wind turbines can convert power carried by the wind into electricity. This book defines a research and development agenda for the U.S. Department of Energy's wind energy program in hopes of improving the performance of this emerging technology.
Download or read book UpWind Design limits and solutions for very large turbines written by and published by EWEA. This book was released on with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Turbine Control Systems written by Fernando D. Bianchi and published by Springer Science & Business Media. This book was released on 2006-09-07 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the application of Linear Parameter Varying (LPV) gain scheduling techniques to the control of wind energy conversion systems. This reformulation of the classical problem of gain scheduling allows straightforward design procedure and simple controller implementation. From an overview of basic wind energy conversion, to analysis of common control strategies, to design details for LPV gain-scheduled controllers for both fixed- and variable-pitch, this is a thorough and informative monograph.
Download or read book Wind Energy Generation Modelling and Control written by Olimpo Anaya-Lara and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIND ENERGY GENERATION WIND ENERGY GENERATION MODELLING AND CONTROL With increasing concern over climate change and the security of energy supplies, wind power is emerging as an important source of electrical energy throughout the world. Modern wind turbines use advanced power electronics to provide efficient generator control and to ensure compatible operation with the power system. Wind Energy Generation describes the fundamental principles and modelling of the electrical generator and power electronic systems used in large wind turbines. It also discusses how they interact with the power system and the influence of wind turbines on power system operation and stability. Key features: Includes a comprehensive account of power electronic equipment used in wind turbines and for their grid connection. Describes enabling technologies which facilitate the connection of large-scale onshore and offshore wind farms. Provides detailed modelling and control of wind turbine systems. Shows a number of simulations and case studies which explain the dynamic interaction between wind power and conventional generation.
Download or read book Wind Turbines written by Abdel Ghani Aissaoui and published by BoD – Books on Demand. This book was released on 2016-07-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energies constitute excellent solutions to both the increase of energy consumption and environment problems. Among these energies, wind energy is very interesting. Wind energy is the subject of advanced research. In the development of wind turbine, the design of its different structures is very important. It will ensure: the robustness of the system, the energy efficiency, the optimal cost and the high reliability. The use of advanced control technology and new technology products allows bringing the wind energy conversion system in its optimal operating mode. Different strategies of control can be applied on generators, systems relating to blades, etc. in order to extract maximal power from the wind. The goal of this book is to present recent works on design, control and applications in wind energy conversion systems.
Download or read book Stability Control and Reliable Performance of Wind Turbines written by Kenneth Eloghene Okedu and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for academics and engineers working in universities, research institutes, and industry sectors wishing to acquire new information and enhance their knowledge of the current trends in wind turbine technology. Readers will gain new ideas and special experience with in-depth information about modeling, stability control, assessment, reliability, and future prospects of wind turbines. This book contains a number of problems and solutions that can be integrated into larger research findings and projects. The book enhances studies concerning the state of the art of wind turbines, modeling and intelligent control of wind turbines, power quality of wind turbines, robust controllers for wind turbines in cold weather, etc. The book also looks at recent developments in wind turbine supporting structures, noise reduction estimation methods, reliability and prospects of wind turbines, etc. As I enjoyed preparing this book, I am sure that it will be valuable for a large sector of readers.
Download or read book Fundamentals of Materials for Energy and Environmental Sustainability written by David S. Ginley and published by Cambridge University Press. This book was released on 2011-11-30 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: How will we meet rising energy demands? What are our options? Are there viable long-term solutions for the future? Learn the fundamental physical, chemical and materials science at the heart of renewable/non-renewable energy sources, future transportation systems, energy efficiency and energy storage. Whether you are a student taking an energy course or a newcomer to the field, this textbook will help you understand critical relationships between the environment, energy and sustainability. Leading experts provide comprehensive coverage of each topic, bringing together diverse subject matter by integrating theory with engaging insights. Each chapter includes helpful features to aid understanding, including a historical overview to provide context, suggested further reading and questions for discussion. Every subject is beautifully illustrated and brought to life with full color images and color-coded sections for easy browsing, making this a complete educational package. Fundamentals of Materials for Energy and Environmental Sustainability will enable today's scientists and educate future generations.
Download or read book Aerodynamics of Wind Turbines 2nd edition written by Martin O. L. Hansen and published by Routledge. This book was released on 2013-05-13 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics of Wind Turbines is the established essential text for the fundamental solutions to efficient wind turbine design. Now in its second edition, it has been entirely updated and substantially extended to reflect advances in technology, research into rotor aerodynamics and the structural response of the wind turbine structure. Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element Momentum method is also covered, as are eigenmodes and the dynamic behaviour of a turbine. The new material includes a description of the effects of the dynamics and how this can be modelled in an ?aeroelastic code?, which is widely used in the design and verification of modern wind turbines. Further, the description of how to calculate the vibration of the whole construction, as well as the time varying loads, has been substantially updated.
Download or read book Structural Control and Fault Detection of Wind Turbine Systems written by Hamid Reza Karimi and published by . This book was released on 2018 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid growth of wind energy worldwide, challenges in the operation and control of wind turbine systems are becoming increasingly important. These affect all parts of the system, and require an integrated approach to optimize safety, cost, integrity and survivability of the system, while retaining the desired performance quality. This book conveys up to date theoretical and practical techniques applicable to the control of wind turbine systems. Topics covered include wave loads on monopole-supported offshore wind turbines; numerical and experimental tools for small wind turbine load analysis; structural control concepts for load reduction of offshore wind turbines; towards farm-level health management of wind turbine systems; data-based approaches to the monitoring of wind turbines; fault diagnostics for electrically operated pitch systems in offshore wind turbines; an emulator prototype design for vibration control of magnetic bearings for wind turbine power generator shafts; condition monitoring and diagnostics of wind turbine power trains; and robust fuzzy fault tolerant control wind energy systems subject to actuator and sensor faults.
Download or read book Wind Turbine Technology written by Muyiwa Adaramola and published by CRC Press. This book was released on 2014-02-24 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title includes a number of Open Access chapters. This important book presents a selection of new research on wind turbine technology, including aerodynamics, generators and gear systems, towers and foundations, control systems, and environmental issues. This informative book: • Introduces the principles of wind turbine design • Presents methods for analysis of wind turbine performance • Discusses approaches for wind turbine improvement and optimization • Covers fault detection in wind turbines • Describes mediating the adverse effects of wind turbine use and installation
Download or read book Wind Turbine Systems written by David A. Rivkin and published by Jones & Bartlett Publishers. This book was released on 2013 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides readers with in-depth information on the mechanical systems that make wind-turbine subsystems. Readers will learn about the rotor system, drive train, nacelle, electrical system, control system, and operating sequence control, along with issues related to wind-turbine location.
Download or read book Robust and Adaptive Control written by Eugene Lavretsky and published by Springer Nature. This book was released on with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
