Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

Download or read book Cone Penetration Testing written by Paul W. Mayne and published by Transportation Research Board. This book was released on 2007 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: NCHRP synthesis 368 explores the current practices of departments of transportation associated with cone penetration testing (CPT). The report examines cone penetrometer equipment options; field testing procedures; CPT data presentation and geostratigraphic profiling; CPT evaluation of soil engineering parameters and properties; CPT for deep foundations, pilings, shallow foundations, and embankments; and CPT use in ground modifications and difficult ground conditions.

Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book Rock socketed Shafts for Highway Structure Foundations written by John P. Turner and published by Transportation Research Board. This book was released on 2006 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.

Download or read book Contemporary Topics in Deep Foundations written by Magued Iskander and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 185 contains 80 papers presented at the International Foundation Congress and Equipment Expo held in Orlando, Florida, March 15-19, 2009.

Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.

Download or read book Design of Highway Bridges written by Richard M. Barker and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of bridge design and analysis revised to reflect the fifth edition of the AASHTO LRFD specifications Design of Highway Bridges, Third Edition offers detailed coverage of engineering basics for the design of short- and medium-span bridges. Revised to conform with the latest fifth edition of the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications, it is an excellent engineering resource for both professionals and students. This updated edition has been reorganized throughout, spreading the material into twenty shorter, more focused chapters that make information even easier to find and navigate. It also features: Expanded coverage of computer modeling, calibration of service limit states, rigid method system analysis, and concrete shear Information on key bridge types, selection principles, and aesthetic issues Dozens of worked problems that allow techniques to be applied to real-world problems and design specifications A new color insert of bridge photographs, including examples of historical and aesthetic significance New coverage of the "green" aspects of recycled steel Selected references for further study From gaining a quick familiarity with the AASHTO LRFD specifications to seeking broader guidance on highway bridge design Design of Highway Bridges is the one-stop, ready reference that puts information at your fingertips, while also serving as an excellent study guide and reference for the U.S. Professional Engineering Examination.

Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.

Download or read book Foundations Earth Structures written by and published by . This book was released on 1986 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundation Engineering in the Face of Uncertainty written by Fred H. Kulhawy and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIDTH: 405pt; BORDER-COLLAPSE: collapse border=0 cellSpacing=0 cellPadding=0 width=540> WIDTH: 405pt; mso-width-source: userset; mso-width-alt: 19748 width=540> HEIGHT: 31.5pt height=42> BORDER-BOTTOM: #f0f0f0; BORDER-LEFT: #f0f0f0; BACKGROUND-COLOR: transparent; WIDTH: 405pt; HEIGHT: 31.5pt; BORDER-TOP: #f0f0f0; BORDER-RIGHT: #f0f0f0 class=xl65 height=42 width=540>GSP 229 contains 54 papers on risk and uncertainty in foundation engineering presented in honor of Fred H. Kulhawy.

Download or read book Shallow Foundations written by Tharwat M. Baban and published by John Wiley & Sons. This book was released on 2016-04-12 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shallow Foundations: Discussions and Problem Solving is written for civil engineers and all civil engineering students taking courses in soil mechanics and geotechnical engineering. It covers the analysis, design and application of shallow foundations, with a primary focus on the interface between the structural elements and underlying soil. Topics such as site investigation, foundation contact pressure and settlement, vertical stresses in soils due to foundation loads, settlements, and bearing capacity are all fully covered, and a chapter is devoted to the structural design of different types of shallow foundations. It provides essential data for the design of shallow foundations under normal circumstances, considering both the American (ACI) and the European (EN) Standard Building Code Requirements, with each chapter being a concise discussion of critical and practical aspects. Applications are highlighted through solving a relatively large number of realistic problems. A total of 180 problems, all with full solutions, consolidate understanding of the fundamental principles and illustrate the design and application of shallow foundations.

Download or read book Pile Design and Construction Practice Fifth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2007-12-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.

Download or read book Model Uncertainties in Foundation Design written by Chong Tang and published by CRC Press. This book was released on 2021-03-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Uncertainties in Foundation Design is unique in the compilation of the largest and the most diverse load test databases to date, covering many foundation types (shallow foundations, spudcans, driven piles, drilled shafts, rock sockets and helical piles) and a wide range of ground conditions (soil to soft rock). All databases with names prefixed by NUS are available upon request. This book presents a comprehensive evaluation of the model factor mean (bias) and coefficient of variation (COV) for ultimate and serviceability limit state based on these databases. These statistics can be used directly for AASHTO LRFD calibration. Besides load test databases, performance databases for other geo-structures and their model factor statistics are provided. Based on this extensive literature survey, a practical three-tier scheme for classifying the model uncertainty of geo-structures according to the model factor mean and COV is proposed. This empirically grounded scheme can underpin the calibration of resistance factors as a function of the degree of understanding – a concept already adopted in the Canadian Highway Bridge Design Code and being considered for the new draft for Eurocode 7 Part 1 (EN 1997-1:202x). The helical pile research in Chapter 7 was recognised by the 2020 ASCE Norman Medal.

Download or read book Earth Retention Systems Handbook written by Alan Macnab and published by McGraw Hill Professional. This book was released on 2002-04-09 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a systematic and comprehensive presentation of temporary excavation shoring and earth retention systems used to construct permanent facilities inside them. These systems are used to construct underground pipelines, tunnels, tank and storage facilities, foundations and structures. Each chapter presents a shoring system type description, how it is constructed, equipment requirements, cost analysis, etc. Safety, inspection and testing codes and methods included throughout.

Download or read book Foundation Analysis and Design written by Joseph E. Bowles and published by . This book was released on 1997 with total page 1175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.