Download or read book Living Probabilistic Safety Assessment for Nuclear Power Plant Management written by OECD Nuclear Energy Agency. Committee on the Safety of Nuclear Installations and published by Paris Nuclear Energy Agency, Organisation for Economic Co-operation and Development. This book was released on 1992 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Safety Assessment for Optimum Nuclear Power Plant Life Management PLiM written by Gennadij V Arkadov and published by Elsevier. This book was released on 2012-09-27 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probabilistic safety assessment methods are used to calculate nuclear power plant durability and resource lifetime. Successful calculation of the reliability and ageing of components is critical for forecasting safety and directing preventative maintenance, and Probabilistic safety assessment for optimum nuclear power plant life management provides a comprehensive review of the theory and application of these methods. Part one reviews probabilistic methods for predicting the reliability of equipment. Following an introduction to key terminology, concepts and definitions, formal-statistical and various physico–statistical approaches are discussed. Approaches based on the use of defect-free models are considered, along with those using binomial distribution and models based on the residual defectiveness of structural materials. The practical applications of probabilistic methods for strength reliability are subsequently explored in part two. Probabilistic methods for increasing the reliability and safety of nuclear power plant components are investigated, as are the use of such methods for optimising non-destructive tests, hydraulic tests, technical certification and planned-preventative maintenance. Finally, the book concludes with information on the use of probabilistic methods in ensuring leak tightness of nuclear power plant steam generator heat exchanger pipes. With its distinguished authors, Probabilistic safety assessment for optimum nuclear power plant life management is a valuable reference for all nuclear plant designers, operators, nuclear safety engineers and managers, as well as academics and researchers in this field. Discusses the theory and application of probabilistic safety assessment methods used to calculate nuclear power plant (NPP) durability and lifetime Reviews probabilistic methods in their application to NPP components and ageing pipelines for the forecasting of NPP resource lifetime and safety Addresses the key areas of probabilistic safety analysis, optimization of the operations through in-service inspection (ISI) utilising non-destructive testing, and maintenance, service and repair approaches
Download or read book Living Probabilistic Safety Assessment for Nuclear Power Plant Management written by Nuclear Energy Agency and published by . This book was released on 1991 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Living Probabilistic Safety Assessment for Nuclear Power Plant Safety Management written by M. V. Bonaca and published by . This book was released on 1991 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Topics in Probabilistic Safety Assessment written by Dan Serbanescu and published by Springer Nature. This book was released on 2020-02-19 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probabilistic Safety Assessment (PSA) is a structured, comprehensive, and logical analysis method aimed at identifying and assessing risks in complex technological systems, such as the nuclear power plants. It is also known as probabilistic risk assessment – PRA. This book presents the theoretical basis to understand the numerous and complex aspects that are covered by PSA and it will help the reader to better understand and to effectively manage risks. The book provides PSA methods and techniques and it includes recommended procedures that are based on the experience of the authors and applicable to different levels and types of PSA that are used for nuclear power plants applications. It can be used as extra reading for PSA courses for practitioners and it provides quantitative risk methodology documentation for PSA.
Download or read book Living Probabilistic Safety Assessment for Nuclear Power Plant Management written by M. V. Bonaca and published by Organization for Economic. This book was released on 1992 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Safety Assessment and Management written by Cornelia Spitzer and published by Springer. This book was released on 2014-01-04 with total page 3803 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers presented at the PSAM 7 – ESREL ’04 conference in June 2004, reflecting a wide variety of disciplines, such as principles and theory of reliability and risk analysis, systems modelling and simulation, consequence assessment, human and organisational factors, structural reliability methods, software reliability and safety, insights and lessons from risk studies and management/decision making. This volume covers both well-established practices and open issues in these fields, identifying areas where maturity has been reached and those where more development is needed.
Download or read book Probabilistic Safety Assessment of WWER440 Reactors written by Zoltan Kovacs and published by Springer. This book was released on 2014-10-08 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to summarize probabilistic safety assessment (PSA) of nuclear power plants with WWER440 reactors and demonstrate that the plants are safe enough for producing energy even in light of the Fukushima accident. The book examines level 1 and 2 full power, low power and shutdown PSA, and summarizes the author’s experience gained during the last 35 years in this area. It provides useful examples taken from PSA training courses the author has lectured and organized by the International Atomic Energy Agency. Such training courses were organised in Argonne National Laboratory (Chicago, IL, USA), Abdus Salaam International Centre for Theoretical Physics (Trieste, Italy), Malaysia, Vietnam and Jordan to support experts from developing countries. The role of PSA for the plants is an estimation of the risks in absolute terms and in comparison with other risks of the technical and the natural world. Plant-specific PSAs are being prepared for the plants and being applied for detection of weaknesses, design improvement and backfitting, incident analysis, accident management, emergency preparedness, prioritization of research and development and to support the regulatory activities. There are three levels of PSA, being performed for full power and low power operation and shutdown operating modes of the plants: level 1, 2 and 3 PSA. The nuclear regulatory authorities do not require the level 3 PSA for the plants in the member countries of the European Union. This means that only a limited number of NPPs in Europe have the level 3 PSA available. However, in the light of the Fukushima accident the performance of such analyses is strongly recommended in the future. This book is intended for professionals working in the nuclear industry, researchers and students interested in safety of operational plants.
Download or read book Development and Application of Level 1 Probabilistic Safety Assessment for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide recommendations for meeting the IAEA safety requirements in performing or managing a level 1 probabilistic safety assessment (PSA) project for a nuclear power plant. These recommendations promote technical consistency among level 1 PSA studies and support applications of PSA and risk informed decision making. The Safety Guide's scope encompasses all operational conditions of the plant and potential initiating events and hazards.
Download or read book Probabilistic Safety Assessment in the Chemical and Nuclear Industries written by Ralph Fullwood and published by Butterworth-Heinemann. This book was released on 2000 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to presenting methodology, it shows how to identify accident vulnerability in the two industries. It reviews the causes of the two major nuclear accidents and many fatal accidents in the chemical industry, including Bhopal. Many examples of applications of PSA to both industries are presented."--BOOK JACKET. "Problems are included at the end of many chapters with answers at the back of the book."--Jacket.
Download or read book Reliability and Probabilistic Safety Assessment in Multi Unit Nuclear Power Plants written by Senthil C. Kumar and published by Academic Press. This book was released on 2023-02-09 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Probabilistic Safety Assessment in Multi-Unit Nuclear Power Plants presents the risk contributions from single and multi-unit Nuclear Power Plants to help aggregate the risks that may arise due to applicable hazards and operating states. The book combines the key features of multi-unit risk assessment in one resource, reviewing the practices adopted in various countries around the globe to exemplify the dependencies between units on a site. These dependencies include multi-unit interactions, environmental stresses, the sharing of systems, and the sharing of human resource in a control room, factors which can all introduce an increase potential for heightened accident conditions. This book helps readers systematically identify events and evaluate techniques of possible accident outcomes within multi-units. It serves as a ready reference for PSA analysts in identifying a suitable site and the sharing of resources, while carrying out multi-unit risk assessments to ensure the safety of the public and the environment. It will also be valuable for nuclear researchers, designers and regulators of nuclear power plants, nuclear regulatory agencies, PSA engineers and practicing safety professionals. Provides a framework for nuclear and PSA researchers and professionals on the design and operation of multi-unit risk assessments Reviews practices adopted in various regions around the globe to analyze dependencies between units Includes modeling techniques of inter-connections and shared resources, as well as risk aggregation
Download or read book Development and Application of Level 2 Probabilistic Safety Assessment for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide recommendations for meeting the IAEA safety requirements in performing or managing a level 2 probabilistic safety assessment (PSA) project for a nuclear power plant; thus it complements the Safety Guide on level 1 PSA. One of the aims of this Safety Guide is to promote a standard framework, standard terms and a standard set of documents for level 2 PSAs to facilitate regulatory and external peer review of their results. It describes all elements of the level 2 PSA that need to be carried out if the starting point is a fully comprehensive level 1 PSA. Contents: 1. Introduction; 2. PSA project management and organization; 3. Identification of design aspects important to severe accidents and acquisition of information; 4. Interface with level 1 PSA: Grouping of sequences; 5. Accident progression and containment analysis; 6. Source terms for severe accidents; 7. Documentation of the analysis: Presentation and interpretation of results; 8. Use and applications of the PSA; References; Annex I: Example of a typical schedule for a level 2 PSA; Annex II: Computer codes for simulation of severe accidents; Annex III: Sample outline of documentation for a level 2 PSA study.
Download or read book The Role of Probabilistic Safety Assessment and Probabilistic Safety Criteria in Nuclear Power Plant Safety written by International Atomic Energy Agency and published by . This book was released on 1992 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This safety report establishes guidelines on the role that probabilistic safety assessment can play as part of an overall safety assurance programme in nuclear power plants. It also describes a framework for probabilistic safety criteria (PSC) and provides guidance for the establishment of PSC values.
Download or read book Human Reliability Analysis in Probabilistic Safety Assessment for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1995 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a practical approach for incorporating human reliability analysis (HRA) into probabilistic safety assessment (PSA). This document describes the steps needed and the documentation that should be provided both to support the PSA itself and to ensure effective communication of important information arising from the studies.
Download or read book Multi unit Probabilistic Safety Assessment written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-10-19 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accident at the Fukushima Daiichi Nuclear Power Plant underlined the need to assess the nuclear safety of multi-unit sites considering the accident sequences involving more than one reactor units on site. The objective of this Safety Report is to provide a methodology for the development of a Multi-unit Probabilistic Safety Assessment (MUPSA). It provides practical examples and an overview of the actual state of practice in this area. The publication provides a detailed description of Level 1 MUPSA methodology, the principles of development of Level 2 MUPSA models and the path forward for multi-unit consequence analysis (Level 3 MUPSA). In addition, it summarizes the experience available in Member States in the area of MUPSA. The scope of this Safety Report includes consideration of various hazards and plant operational states normally considered in PSA development in the multi-unit context.
Download or read book Report on the use of probabilistic safety assessment for nuclear power plant safety management utilities reply to a questionnaire written by and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probabilistic Safety Assessment in Nuclear Power Plant Management written by OECD Nuclear Energy Agency. Committee on the Safety of Nuclear Installations and published by Nuclear Energy Agency, Organisation for Economic Co-operation and Development ; Washington, D.C. : OECD Publication and Information Centre. This book was released on 1989 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dated June 1989