Download or read book Semiconductor Lithography written by Wayne M. Moreau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor lithography is one of the key steps in the manufacturing of integrated silicon-based circuits. In fabricating a semiconductor device such as a transistor, a series of hot processes consisting of vacuum film deposition, oxidations, and dopant implantation are all patterned into microscopic circuits by the wet processes of lithography. Lithography, as adopted by the semiconductor industry, is the process of drawing or printing the pattern of an integrated circuit in a resist material. The pattern is formed and overlayed to a previous circuit layer as many as 30 times in the manufacture of logic and memory devices. With the resist pattern acting as a mask, a permanent device structure is formed by subtractive (removal) etching or by additive deposition of metals or insulators. Each process step in lithography uses inorganic or organic materials to physically transform semiconductors of silicon, insulators of oxides, nitrides, and organic polymers, and metals, into useful electronic devices. All forms of electromagnetic radiation are used in the processing. Lithography is a mUltidisciplinary science of materials, processes, and equipment, interacting to produce three-dimensional structures. Many aspects of chemistry, electrical engineering, materials science, and physics are involved. The purpose of this book is to bring together the work of many scientists and engineers over the last 10 years and focus upon the basic resist materials, the lithographic processes, and the fundamental principles behind each lithographic process.
Download or read book Fundamental Principles of Optical Lithography written by Chris Mack and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of an integrated circuit requires a variety of physical and chemical processes to be performed on a semiconductor substrate. In general, these processes fall into three categories: film deposition, patterning, and semiconductor doping. Films of both conductors and insulators are used to connect and isolate transistors and their components. By creating structures of these various components millions of transistors can be built and wired together to form the complex circuitry of modern microelectronic devices. Fundamental to all of these processes is lithography, ie, the formation of three-dimensional relief images on the substrate for subsequent transfer of the pattern to the substrate. This book presents a complete theoretical and practical treatment of the topic of lithography for both students and researchers. It comprises ten detailed chapters plus three appendices with problems provided at the end of each chapter. Additional Information: Visiting http://www.lithoguru.com/textbook/index.html enhances the reader's understanding as the website supplies information on how you can download a free laboratory manual, Optical Lithography Modelling with MATLAB®, to accompany the textbook. You can also contact the author and find help for instructors.
Download or read book Lithography for Semiconductor Manufacturing written by and published by . This book was released on 2001 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microlithography Fundamentals in Semiconductor Devices and Fabrication Technology written by Saburo Nonogaki and published by CRC Press. This book was released on 2018-10-08 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Explores the science and technology of lithographic processes and resist materials and summarizes the most recent innovations in semiconductor manufacturing. Considers future trends in lithography and resist material technology. Reviews the interaction of light, electron beams, and X-rays with resist materials."
Download or read book Field Guide to Optical Lithography written by Chris A. Mack and published by Society of Photo Optical. This book was released on 2006 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Guide distills the material written by Chris Mack over the past 20 years, including notes from his graduate-level lithography course at the University of Texas at Austin. It details the lithography process, image formation, imaging onto a photoresist, photoresist chemistry, and lithography control and optimization. An introduction to next-generation lithographic technologies is also included, as well as an extensive lithography glossary and a summation of salient equations critical to anyone involved in the lithography industry.
Download or read book Computational Lithography written by Xu Ma and published by John Wiley & Sons. This book was released on 2011-01-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Unified Summary of the Models and Optimization Methods Used in Computational Lithography Optical lithography is one of the most challenging areas of current integrated circuit manufacturing technology. The semiconductor industry is relying more on resolution enhancement techniques (RETs), since their implementation does not require significant changes in fabrication infrastructure. Computational Lithography is the first book to address the computational optimization of RETs in optical lithography, providing an in-depth discussion of optimal optical proximity correction (OPC), phase shifting mask (PSM), and off-axis illumination (OAI) RET tools that use model-based mathematical optimization approaches. The book starts with an introduction to optical lithography systems, electric magnetic field principles, and the fundamentals of optimization from a mathematical point of view. It goes on to describe in detail different types of optimization algorithms to implement RETs. Most of the algorithms developed are based on the application of the OPC, PSM, and OAI approaches and their combinations. Algorithms for coherent illumination as well as partially coherent illumination systems are described, and numerous simulations are offered to illustrate the effectiveness of the algorithms. In addition, mathematical derivations of all optimization frameworks are presented. The accompanying MATLAB® software files for all the RET methods described in the book make it easy for readers to run and investigate the codes in order to understand and apply the optimization algorithms, as well as to design a set of optimal lithography masks. The codes may also be used by readers for their research and development activities in their academic or industrial organizations. An accompanying MATLAB® software guide is also included. An accompanying MATLAB® software guide is included, and readers can download the software to use with the guide at ftp://ftp.wiley.com/public/sci_tech_med/computational_lithography. Tailored for both entry-level and experienced readers, Computational Lithography is meant for faculty, graduate students, and researchers, as well as scientists and engineers in industrial organizations whose research or career field is semiconductor IC fabrication, optical lithography, and RETs. Computational lithography draws from the rich theory of inverse problems, optics, optimization, and computational imaging; as such, the book is also directed to researchers and practitioners in these fields.
Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.
Download or read book Introduction to Semiconductor Manufacturing Technology written by Hong Xiao and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Semiconductor Manufacturing Technology, IC Fabrication Technology, and Devices: Conventional Flow. This up-to-date text on semiconductor manufacturing processes takes into consideration the rapid development of the industry's technology. It thoroughly describes the complicated and new IC chip fabrication processes in detail with minimum mathematics, physics, and chemistry. Advanced technologies are covered along with older ones to assist students in understanding the development processes from a historic point of view.
Download or read book Run to Run Control in Semiconductor Manufacturing written by James Moyne and published by CRC Press. This book was released on 2018-10-08 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Run-to-run (R2R) control is cutting-edge technology that allows modification of a product recipe between machine "runs," thereby minimizing process drift, shift, and variability-and with them, costs. Its effectiveness has been demonstrated in a variety of processes, such as vapor phase epitaxy, lithography, and chemical mechanical planarization. The only barrier to the semiconductor industry's widespread adoption of this highly effective process control is a lack of understanding of the technology. Run to Run Control in Semiconductor Manufacturing overcomes that barrier by offering in-depth analyses of R2R control.
Download or read book Lithography for Semiconductor Manufacturing II written by Chris A. Mack and published by Society of Photo Optical. This book was released on 2001 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lithography for Semiconductor Manufacturing written by Chris A. Mack and published by SPIE-International Society for Optical Engineering. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Manufacturing Handbook written by Hwaiyu Geng and published by McGraw Hill Professional. This book was released on 2005-05-18 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: WORLD-CLASS SEMICONDUCTOR MANUFACTURING EXPERTISE AT YOUR FINGERTIPS This is a comprehensive reference to the semiconductor manufacturing process and ancillary facilities -- from raw material preparation to packaging and testing, applying basics to emerging technologies. Readers charged with optimizing the design and performance of manufacturing processes will find all the information necessary to produce the highest quality chips at the lowest price in the shortest time possible. The Semiconductor Manufacturing Handbook provides leading-edge information on semiconductor wafer processes, MEMS, nanotechnology, and FPD, plus the latest manufacturing and automation technologies, including: Yield Management Automated Material Handling System Fab and Cleanroom Design and Operation Gas Abatement and Waste Treatment Management And much more Written by 60 international experts, and peer reviewed by a seasoned advisory board, this handbook covers the fundamentals of relevant technology and its real-life application and operational considerations for planning, implementing, and controlling manufacturing processes. It includes hundreds of detailed illustrations and a list of relevant books, technical papers, and websites for further research. This inclusive, wide-ranging coverage makes the Semiconductor Manufacturing Handbook the most comprehensive single-volume reference ever published in the field. STATE-OF-THE-ART SEMICONDUCTOR TECHNOLOGIES AND MANUFACTURING PROCESSES: SEMICONDUCTOR FUNDAMENTALS How Chips Are Designed and Made * Substrates * Copper and Low-k Dielectrics * Silicide Formation * Plasma * Vacuum * Photomask WAFER PROCESSING TECHNOLOGIES Microlithography * Ion Implantation * Etch * PVD/ALD * CVD * ECD * Epitaxy * CMP * Wet Cleaning FINAL MANUFACTURING Packaging * Grinding, Stress Relief, Dicing * Inspection, Measurement, and Testing NANOTECHNOLOGY, MEMS, AND FPD GAS AND CHEMICALS Specialty Gas System and DCA * Gas Abatement Systems * Chemical and Slurries Delivery System * Ultra Pure Water FAB YIELD, OPERATIONS, AND FACILITIES Yield Management * Automated Materials Handling System * Metrology * Six Sigma * Advanced Process Control * EHS * Fab Design and Construction * Cleanroom * Vibration and Acoustic Control * ESD * Airborne Molecular Control * Particle Monitoring * Wastewater Neutralization Systems
Download or read book From Sand to Silicon An Insider s Guide to Semiconductor Manufacturing written by Charles Nehme and published by Charles Nehme. This book was released on with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illuminating the Realm of Semiconductor Manufacturing In the vast landscape of technological progress, few realms have captured the imagination and propelled humanity forward as profoundly as semiconductor manufacturing. From the humble beginnings of vacuum tubes to the marvels of integrated circuits, the art and science of creating microelectronic wonders have revolutionized countless industries, touching every aspect of our modern lives. This book delves into the intricate world of semiconductor manufacturing, shedding light on the secrets hidden within the microscopic structures that power our digital age. It embarks on a journey through the interplay of physics, chemistry, engineering, and innovation, revealing the complex tapestry of processes that transform raw materials into the backbone of our technological advancement. As we venture further into the digital era, the demand for faster, smaller, and more efficient devices continues to surge. The manufacturing of semiconductor chips has become a delicate dance between precision and scale, pushing the boundaries of what was once thought possible. Understanding the intricacies of this process is vital not only for engineers and scientists but for anyone seeking a deeper appreciation of the technological marvels that surround us. Throughout this book, we aim to demystify the fascinating world of semiconductor manufacturing, guiding readers through the fundamental concepts, the challenges faced, and the remarkable achievements attained. We will explore the various stages of semiconductor fabrication, from crystal growth and wafer preparation to photolithography, etching, and deposition, all the way to packaging and testing. Along the way, we will encounter the heroes of this domain—scientists, engineers, and innovators—who have relentlessly pursued breakthroughs, unlocking the secrets that underpin the magic of the semiconductor industry. While the content within these pages is intended to provide a comprehensive overview, it is important to acknowledge that the field of semiconductor manufacturing is a dynamic and ever-evolving one. With each passing day, new discoveries and advancements push the boundaries even further. Therefore, this book aims to serve as a foundation, providing readers with the knowledge and tools to grasp the core principles, while also inspiring them to explore and contribute to the ongoing advancements in this field. Whether you are a curious student embarking on a journey of discovery, a seasoned professional seeking to expand your knowledge, or an enthusiast eager to comprehend the inner workings of the devices that shape our lives, this book will be your guide. Together, let us embark on an illuminating expedition into the realm of semiconductor manufacturing, where the merging of science and engineering enables us to glimpse the boundless possibilities that lie ahead.
Download or read book Lithography for Semiconductor Manufacturing written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lithography Process Control written by Harry J. Levinson and published by SPIE Press. This book was released on 1999 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers lithography process control at several levels, from fundamental through advanced topics. The book is a self-contained tutorial that works both as an introduction to the technology and as a reference for the experienced lithographer. It reviews the foundations of statistical process control as background for advanced topics such as complex processes and feedback. In addition, it presents control methodologies that may be applied to process development pilot lines.
Download or read book Optical Lithography written by Burn Jeng Lin and published by SPIE-International Society for Optical Engineering. This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written for new and experienced engineers, technology managers, and senior technicians who want to enrich their understanding of the image formation physics of a lithographic system. Readers will gain knowledge of the basic equations and constants that drive optical lithography, learn the basics of exposure systems and image formation, and come away with a full understanding of system components, processing, and optimization. Readers will also get an overview of the outlook of optical lithography and means to enhance semiconductor manufacturing. This second edition blends the author's unique experience in research, teaching, and world-class high-volume manufacturing to add brand new material on proximity printing, as well as updated and expanded material on exposure systems, image formation, E-D methodology, hardware components, processing and optimization, and EUV and immersion lithographies.
Download or read book Using R D Consortia for Commercial Innovation written by Philip Webre and published by . This book was released on 1990 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
