Download or read book LISREL 8 written by K. G. Jöreskog and published by Scientific Software International. This book was released on 1996 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Using LISREL for Structural Equation Modeling written by E. Kevin Kelloway and published by SAGE. This book was released on 1998-05-05 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: A highly readable introduction, Using LISREL for Structural Equation Modeling is for researchers and graduate students in the social sciences who want or need to use structural equation modeling techniques to answer substantive research questions. Author E. Kevin Kelloway provides an overview of structural equation modeling including the theory and logic of structural equation models (SEMs), assessing the "fit" of SEMs to the data, and implementation of SEMs in the LISREL environment. Specific applications of SEMs are considered, including confirmatory factor analysis, observed variable path analysis, and latent variable path analysis. A sample application including the source code, printout, and results section is presented for each type of analysis. Tricks of the trade for structural equation modeling are presented, including the use of single-indicator latent variable and reducing the cognitive complexity of models.

Download or read book Interactive LISREL written by Mathilda Du Toit and published by Scientific Software International. This book was released on 2001 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of the interface - Prelis examples - Lisrel examples - Multilevel examples - Firm examples - New statistical features - Syntax.

Download or read book Structural Equation Modeling with LISREL PRELIS and SIMPLIS written by Barbara M. Byrne and published by Psychology Press. This book was released on 1998 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: In short, it serves as companion to the LISREL 8 and PRELIS 2 manuals, and to any statistics textbook dealing with the topic of structural equation modelling.

Download or read book Introducing LISREL written by Adamantios Diamantopoulos and published by SAGE. This book was released on 2000-09-22 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: `If you encounter a research student for whom the very word LISREL induces feelings of fear, quietly recommend that they read this book. They will thank you for it. With increasingly user-friendly versions of LISREL being released and guide books such as this published, LISREL really should be accessible to all' - European Journal of MarketingEmphasizing substantive issues rather than intricate statistical details, this book provides a comprehensive introduction to LISREL for structural equation modeling (SEM) using a non-technical, user-oriented approach that. The emphasis is on:- exposing the reader to the major steps associated with the formulation and testing of a model under the LISREL framework- describing the key decisions associated with each step- highlighting potential problems and limitations associated with LISREL modeling- assisting the interpretation of LISREL input and output files.The overall aim is to provide a critical understanding of what is really involved in LISREL modeling and sensitize the reader against `mechanically' fitting or modifying models.The entire range of decisions associated with the practical application of the LISREL program is covered in a user-friendly fashion. Concrete examples are used throughout to illustrate issues relating to model conceptualization, specification, identification, estimation, evaluation, modification, and cross-validation and illustrated with actual program output.The program is made much more accessible by adopting the more user-friendly SIMPLIS command language for preparing input files. Although primarily aimed at beginning users, readers are directed to further reading together with a comprehensive bibliography for the more advanced user.

Download or read book LISREL 8 written by Karl G. Jöreskog and published by Scientific Software International. This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simple examples - Mullti-sample examples - Path diagrams - Fitting and testing - Lisrel output - Simplis reference - Computer exercises.

Download or read book Structural Equation Modeling with LISREL written by Leslie A. Hayduk and published by JHU Press. This book was released on 1987 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hayduk is equally at ease explaining the simplest and most advanced applications of the program . . . Hayduk has written more than just a solid text for use in advanced graduate courses on statistical modeling. Those with a firm mathematical background who wish to learn about the approach, or those who know a little about the program and want to know more, will find this an excellent reference.

Download or read book LISREL Approaches to Interaction Effects in Multiple Regression written by James Jaccard and published by SAGE. This book was released on 1996-03-21 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: With detailed examples, this book demonstrates the use of the computer program LISREL and how it can be applied to the analysis of interactions in regression frameworks. The authors consider a wide range of applications including: qualitative moderator variables; longitudinal designs; and product term analysis. They describe different types of measurement error and then present a discussion of latent variable representations of measurement error which serves as the foundation for the analyses described in later chapters. Finally they offer a brief introduction to LISREL and show how it can be used to execute the analyses. Readers can use this book without any prior training in LISREL and will find it an excellent introduction to analytic methods that deal with the problem of measurement error in the analysis of interactions.

Download or read book Structural Equation Modeling With Lisrel Prelis and Simplis written by Barbara M. Byrne and published by Psychology Press. This book was released on 2013-05-13 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the ease with which various features of LISREL 8 and PRELIS 2 can be implemented in addressing research questions that lend themselves to SEM. Its purpose is threefold: (a) to present a nonmathmatical introduction to basic concepts associated with SEM, (b) to demonstrate basic applications of SEM using both the DOS and Windows versions of LISREL 8, as well as both the LISREL and SIMPLIS lexicons, and (c) to highlight particular features of the LISREL 8 and PRELIS 2 progams that address important caveats related to SEM analyses. This book is intended neither as a text on the topic of SEM, nor as a comprehensive review of the many statistical funcitons available in the LISREL 8 and PRELIS 2 programs. Rather, the intent is to provide a practical guide to SEM using the LISREL approach. As such, the reader is "walked through" a diversity of SEM applications that include both factor analytic and full latent variable models, as well as a variety of data management procedures.

Download or read book LISREL Issues Debates and Strategies written by Leslie A. Hayduk and published by JHU Press. This book was released on 1996-01-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A more appropriate Monte-Carlo-test model is proposed and a brief review of the recent literature is provided.

Download or read book Basic Principles of Structural Equation Modeling written by Ralph O. Mueller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, structural equation modeling (SEM) has emerged as a powerful multivariate data analysis tool in social science research settings, especially in the fields of sociology, psychology, and education. Although its roots can be traced back to the first half of this century, when Spearman (1904) developed factor analysis and Wright (1934) introduced path analysis, it was not until the 1970s that the works by Karl Joreskog and his associates (e. g. , Joreskog, 1977; Joreskog and Van Thillo, 1973) began to make general SEM techniques accessible to the social and behavioral science research communities. Today, with the development and increasing avail ability of SEM computer programs, SEM has become a well-established and respected data analysis method, incorporating many of the traditional analysis techniques as special cases. State-of-the-art SEM software packages such as LISREL (Joreskog and Sorbom, 1993a,b) and EQS (Bentler, 1993; Bentler and Wu, 1993) handle a variety of ordinary least squares regression designs as well as complex structural equation models involving variables with arbitrary distributions. Unfortunately, many students and researchers hesitate to use SEM methods, perhaps due to the somewhat complex underlying statistical repre sentation and theory. In my opinion, social science students and researchers can benefit greatly from acquiring knowledge and skills in SEM since the methods-applied appropriately-can provide a bridge between the theo retical and empirical aspects of behavioral research.

Download or read book Prelis written by Karl G. Joreskog and published by . This book was released on 1988-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multivariate Analysis with LISREL written by Karl G. Jöreskog and published by Springer. This book was released on 2016-10-17 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book traces the theory and methodology of multivariate statistical analysis and shows how it can be conducted in practice using the LISREL computer program. It presents not only the typical uses of LISREL, such as confirmatory factor analysis and structural equation models, but also several other multivariate analysis topics, including regression (univariate, multivariate, censored, logistic, and probit), generalized linear models, multilevel analysis, and principal component analysis. It provides numerous examples from several disciplines and discusses and interprets the results, illustrated with sections of output from the LISREL program, in the context of the example. The book is intended for masters and PhD students and researchers in the social, behavioral, economic and many other sciences who require a basic understanding of multivariate statistical theory and methods for their analysis of multivariate data. It can also be used as a textbook on various topics of multivariate statistical analysis.

Download or read book Interactive LISREL in Practice written by Armando Luis Vieira and published by Springer. This book was released on 2011-03-27 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Getting Started with a SIMPLIS Approach” is particularly appropriate for those users who are not experts in statistics, but have a basic understanding of multivariate analysis that would allow them to use this handbook as a good first foray into LISREL. Part I introduces the topic, presents the study that serves as the background for the explanation of matters, and provides the basis for Parts II and III, which, in turn, explain the process of estimation of the measurement model and the structural model, respectively. In each section, we also suggest essential literature to support the utilization of the handbook. After having read the book, readers will have acquired a basic knowledge of structural equation modeling, namely using the LISREL program, and will be prepared to continue with the learning process.

Download or read book LISREL 7 written by K. G. Jöreskog and published by S P S S, Incorporated. This book was released on 1989 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Equations with Latent Variables written by Kenneth A. Bollen and published by John Wiley & Sons. This book was released on 2014-08-28 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Ordinal Categorical Data Alan Agresti Statistical Science Now has its first coordinated manual of methods for analyzing ordered categorical data. This book discusses specialized models that, unlike standard methods underlying nominal categorical data, efficiently use the information on ordering. It begins with an introduction to basic descriptive and inferential methods for categorical data, and then gives thorough coverage of the most current developments, such as loglinear and logit models for ordinal data. Special emphasis is placed on interpretation and application of methods and contains an integrated comparison of the available strategies for analyzing ordinal data. This is a case study work with illuminating examples taken from across the wide spectrum of ordinal categorical applications. 1984 (0 471-89055-3) 287 pp. Regression Diagnostics Identifying Influential Data and Sources of Collinearity David A. Belsley, Edwin Kuh and Roy E. Welsch This book provides the practicing statistician and econometrician with new tools for assessing the quality and reliability of regression estimates. Diagnostic techniques are developed that aid in the systematic location of data points that are either unusual or inordinately influential; measure the presence and intensity of collinear relations among the regression data and help to identify the variables involved in each; and pinpoint the estimated coefficients that are potentially most adversely affected. The primary emphasis of these contributions is on diagnostics, but suggestions for remedial action are given and illustrated. 1980 (0 471-05856-4) 292 pp. Applied Regression Analysis Second Edition Norman Draper and Harry Smith Featuring a significant expansion of material reflecting recent advances, here is a complete and up-to-date introduction to the fundamentals of regression analysis, focusing on understanding the latest concepts and applications of these methods. The authors thoroughly explore the fitting and checking of both linear and nonlinear regression models, using small or large data sets and pocket or high-speed computing equipment. Features added to this Second Edition include the practical implications of linear regression; the Durbin-Watson test for serial correlation; families of transformations; inverse, ridge, latent root and robust regression; and nonlinear growth models. Includes many new exercises and worked examples. 1981 (0 471-02995-5) 709 pp.

Download or read book LISREL 8 written by K. G. Jöreskog and published by Psychology Press. This book was released on 1993 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces LISREL 8--all that is required is to name all observed latent (if any) variables and to formulate the model to be estimated. The model can be specified either as paths or as relationships (equations) in the input file or as a path diagram at run time. It is not necessary to be familiar with the LISRELmodel or any of its submodels, nor are any greek or matrix notations required. There are no complicated options to learn and anyone who can formulate the model as a path diagram can use the SIMPLIScommand language immediately. This book is written for students and researchers with limited mathematical and statistical training who need to use structural equation models to analyze their data and learn the LISRELcommand language. It is not a textbook on factor analysis, structural equations or latent variable models, although there are many examples of such in the book. Rather, it is assumed that the reader is already familiar with the basic ideas and principles of these types of analyses and techniques. The main objective is to demonstrate how structural equation modeling can be easily learned without a great deal of the technical jargon. The SIMPLIS language makes it much easier to specify models and to carry out the analysis. The substantive specification and interpretation remain the same as with the LISRELcommand language. The SIMPLISlanguage shifts the focus away from the technical question "how to do it" so that researchers can concentrate on the more substantively interesting question "what does it all mean?"