Download or read book Liquids Under Negative Pressure written by A.R. Imre and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is possible to "stretch" a liquid and, when suitably prepared, liquids are capable of sustaining substantial levels of tension, often for significant periods of time. These negative pressure states are metastable but can last for days - long enough for substantial experimental investigation. This volume is a review of recent and current research into the behaviour of liquids under negative pressure. Part I deals with the thermodynamics of stretched liquids. Part II discusses the physical and chemical behaviour of liquids under negative pressure. Part III contains papers on the effect of negative pressure on the solidification of a liquid. Part IV is devoted to stretched helium and Part V discusses cavitation in various stretched liquids. Part VI deals with the effect of foreign substances on cavitation.
Download or read book Handbook of Industrial Toxicology and Hazardous Materials written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 1999-01-12 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing vital safety information on over 1000 commerical chemicals, this work explores up-to-date data on fire and chemical compatibility, response methods for incidents involving chemical spills and fires, and personnel and worksite safety monitoring and sampling. The book includes more than 700 illustrations, structures, equations and tables, and a glossary with over 700 definitions.
Download or read book Mechanics and Physics of Bubbles in Liquids written by Leen van Wijngaarden and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: A IUTAM (International Union of Theoretical and Applied Mechanics) Sympo sium 'Mechanics and Physics of Bubbles in Liquids' was held at Pasadena, Calif., USA from 15 through 19 June 1981. The present volume contains the printed version of nearly all papers read at the Symposium. The study of the behaviour of bubbles in liquids was originally stimu lated by problems in cavitation and in boiling ofliquids. Today research is initiated by problems in many other fields as well. In this respect a growing interest from the side of biomechanics may be mentioned. Ordering of the papers could be done either according to the various mechanical and physical aspects of the subject or according to the fields of application. The presentaton at the Symposium contained a bit of both; there was a session on physico-chemical aspects for example and also a session on biological applications. The subdivision in this volume follows roughly the sessions in the Symposium. Most of them start with a paper of a survey nature, reporting progress made in recent years. Here, as in other fields of engineering science, one notes the important part played by experimental techniques and by numerical analysis.
Download or read book Laser Induced Damage in Optical Materials 1976 written by and published by . This book was released on 1976 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage in Optical Materials written by and published by . This book was released on 1976 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Technology written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2018-01-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The acronym Laser is derived from Light Amplification by Stimulated Emission of Radiation. With the advent of the ruby laser in 1960, there has been tremendous research activity in developing novel, more versatile and more efficient laser sources or devices, as lasers applications are ubiquitous. Today, lasers are used in many areas of human endeavor and are routinely employed in a host of diverse fields: various branches of engineering, microelectronics, biomedical, medicine, dentistry, surgery, surface modification, to name just a few. In this book (containing 10 chapters) we have focused on application of lasers in adhesion and related areas. The topics covered include: Topographical modification of polymers and metals by laser ablation to create superhydrophobic surfaces. Non-ablative laser surface modification. Laser surface modification to enhance adhesion. Laser surface engineering of materials to modulate their wetting behavior. Laser surface modification in dentistry. Laser polymer welding. Laser based adhesion testing technique to measure thin film-substrate interface toughness. Laser surface removal of hard thin ceramic coatings. Laser removal of particles from surfaces. Laser induced thin film debonding for micro-device fabrication applications.
Download or read book The Guiding Helper written by Abu Qanit al-Sharif al-Hasani and published by Lulu.com. This book was released on 2019-07-18 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Guiding Helper is a practical guide to the three aspects of Islam within the Maliki school, namely Iman, Islam and Ihsan. It is an English adaptation of Ibn 'Ashir's famous text al-Murshid al-Mu'in, and has been written uniquely for the modern reader while only using authenticated opinions within the Maliki school. Containing 43 easy-to-memorize songs that are also fun to recite, it is destined to serve as a trusty companion for English-speaking Malikis for many years to come.
Download or read book Liquid Metal Processing written by I.G. Brodova and published by CRC Press. This book was released on 2001-10-04 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The title presents an up-to-date account of the research, development, and applications of metallic alloys, recent research into the structure of charge materials, melt treatment, and casting technologies, and their influence on the properties of melts and ingots. This research has confirmed theoretical concepts about the microheterogenous constitution of metallic melts and has made it possible to manage the quality of castings and ingots of various alloys by their special treatment in the liquid state. The four chapters of the book give theoretical and experimental evidence of the effect of the melt constitution on the structure and properties of the solid metal. Liquid Metal Processing: Applications to Aluminium Alloy Production considers common features of structure formation in aluminium alloys for a wide range of solidification conditions, including ultrasonic and thermal melt treatments and discusses the technological problems of these treatments.
Download or read book Water and Society written by Darrell W. Pepper and published by WIT Press. This book was released on 2012 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at a conference co-organized by the University of Nevada-Las Vegas and the Wessex Institute of Technology to facilitate trans-disciplinary communication on issues related to the nature of water, and its use and exploitation by society. With adequate water supply becoming a critical issue in more and more area, \there is a great and urgent need to bridge the gap between the broad spectrum of social sciences and humanistic disciplines and the specialists in physical and natural sciences, biology, environmental sciences, and health. Many issues are also trans-national in nature and relate to rights of states and hence it is essential to discuss these at international level to arrive at equitable and binding solutions that will ensure the rights of society to quality water supplies. The book discusses The nature of water; Water as a human right; Water as the source of life; Water in a changing climate; Future water demands and adaptation strategies; Water resources contamination; Surface and sub-surface water resources; Irrigation and desertification; Water, sanitation and health; Transnational water rights; Legislation and controls; Water through the ages; Lessons to be learnt; and Water and disaster management.
Download or read book Handbook of Liquids Assisted Laser Processing written by Arvi Kruusing and published by Elsevier. This book was released on 2010-07-07 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser processing of solid materials has been commonly performed in gas ambient. Having the workpiece immersed into liquid, having a liquid film on it, or soaking the material with liquid gives several advantages such as removal of the debris, lowering the heat load on the workpiece, and confining the vapour and plasma, resulting in higher shock pressure on the surface. Introduced in the 1980s, neutral liquids assisted laser processing (LALP) has proved to be advantageous in the cutting of heat-sensitive materials, shock peening of machine parts, cleaning of surfaces, fabrication of micro-optical components, and for generation of nanoparticles in liquids. The liquids used range from water through organic solvents to cryoliquids. The primary aim of Handbook of Liquids-Assisted Laser Processing is to present the essentials of previous research (tabulated data of experimental conditions and results), and help researchers develop new processing and diagnostics techniques (presenting data of liquids and a review of physical phenomena associated with LALP). Engineers can use the research results and technological innovation information to plan their materials processing tasks. Laser processing in liquids has been applied to a number of different tasks in various fields such as mechanical engineering, microengineering, chemistry, optics, and bioscience. A comprehensive glossary with definitions of the terms and explanations has been added. The book covers the use of chemically inert liquids under normal conditions. Laser chemical processing examples are presented for comparison only. - First book in this rapidly growing field impacting mechanical and micro/nano-engineering - Covers different kinds of liquid-assisted laser processing of a large variety of materials - Covers lasers emitting from UV to IR with pulse lengths down to femtoseconds - Reviews over 500 scientific articles and 300 inventions and tabulates their main features - Gives a qualitative and quantitative description of the physical phenomena associated with LALP - Tabulates 61 parameters for 100 liquids - Glossary of over 200 terms and abbreviations
Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Albuquerque Convention Center was the venue for the 1993 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. Walter F. Stewart, of Los Alamos National Laboratory, was conference chairman. Albuquerque is near Los Alamos National Laboratory which has been a significant contributor to the cryogenics community since the early days of the Manhattan Project. Albuquerque is also the home of the Air Force's Phillips Laboratory which has a lead role in developing cryocoolers. The program consisted of 322 CEC papers, more than a 30% increase from CEC-91 and 20% more than CEC-89. This was the largest number of papers ever submitted to the CEC. Of these, 249 papers are published here, in Volume 39 of Advances in Cryogenic Engineering. Once again the volume is published in two books. This volume includes a cumulative index for the CEC volumes from 1975-1993 (volumes 21,23,25,27,29,31,33,35,37, and 39 of Advances in Cryogenic Engineering). The first 20 volumes are indexed in Volume 20. A companion cumulative index for the ICMC volumes (volumes 22 through 40) appears in Volume 40. This is my first volume as editor. I would not have been able to have done it without the assistance of the many reviewers. Especially appreciated was the instruction manual left me by the previous editor, Ron Fast.
Download or read book Recent Advances In Spray Combustion written by Kenneth K. Kuo and published by AIAA. This book was released on 1996 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic Cavitation Thresholds in Water written by W. Connolly and published by . This book was released on 1954 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 2000 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Register written by and published by . This book was released on 2013-06 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin written by and published by . This book was released on 1996 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SEC Docket written by United States. Securities and Exchange Commission and published by . This book was released on 2013 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
