Download or read book Frontiers in Bioenergy and Biofuels written by Eduardo Jacob-Lopes and published by BoD – Books on Demand. This book was released on 2017-01-25 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Bioenergy and Biofuels presents an authoritative and comprehensive overview of the possibilities for production and use of bioenergy, biofuels, and coproducts. Issues related to environment, food, and energy present serious challenges to the success and stability of nations. The challenge to provide energy to a rapidly increasing global population has made it imperative to find new technological routes to increase production of energy while also considering the biosphere's ability to regenerate resources. The bioenergy and biofuels are resources that may provide solutions to these critical challenges. Divided into 25 discreet parts, the book covers topics on characterization, production, and uses of bioenergy, biofuels, and coproducts. Frontiers in Bioenergy and Biofuels provides an insight into future developments in each field and extensive bibliography. It will be an essential resource for researchers and academic and industry professionals in the energy field.
Download or read book Energy Resources and Systems written by Tushar K. Ghosh and published by Springer Science & Business Media. This book was released on 2009-06-04 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the lifetimes of the authors, the world and especially the United States have received three significant “wake-up calls” on energy production and consumption. The first of these occurred on October 15, 1973 when the Yom Kippur War began with an attack by Syria and Egypt on Israel. The United States and many western countries supported Israel. Because of the western support of Israel, several Arab oil exporting nations imposed an oil embargo on the west. These nations withheld five million barrels of oil per day. Other countries made up about one million barrels of oil per day but the net loss of four million barrels of oil production per day extended through March of 1974. This represented 7% of the free world’s (i. e. , excluding the USSR) oil production. In 1972 the price of crude oil was about $3. 00 per barrel and by the end of 1974 the price of oil had risen by a factor of 4 to over $12. 00. This resulted in one of the worst recessions in the post World War II era. As a result, there was a movement in the United States to become energy independent. At that time the United States imported about one third of its oil (about five million barrels per day). After the embargo was lifted, the world chose to ignore the “wake-up call” and went on with business as usual.
Download or read book Standard Methods for Analysis and Testing of Petroleum and Related Products and British Standard 2000 Parts written by Institute of Petroleum (Great Britain) and published by . This book was released on 1998 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a directory of standardized methods for the testing and analysis of petroleum-based products, published annually in two volumes. As particular technical advances are made, faster and more accurate procedures present themselves and have to be assessed. The methods of analysis contained in this publication are constantly reviewed and revised. Information on the new developments within the industry are also included. New methods have ISO classifications.
Download or read book Products and Services Catalogue written by and published by . This book was released on 2001 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standards Catalogue written by and published by . This book was released on 1998 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by R. A. Nadkarni and published by Astm International. This book was released on 2000 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the essential elements of all analytical tests used to characterize petroleum products. The 350 plus entries are alphabetically arranged by chemical and physical properties, such as apparent viscosity, density, metal analysis, sulfur determination, vapor pressure, and water. Each entry co
Download or read book Methods of Test for Petroleum and Its Products Liquid Petroleum Products Unleaded Petrol Determination of Organic Oxygenate Compounds and Total Organically Bound Oxygen Content by Gas Chromatography Using Column Switching written by British Standards Institute Staff and published by . This book was released on 2000-08-15 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unleaded gasoline, Gasoline, Petroleum, Petroleum products, Automotive fuels, Liquid fuels, Chemical analysis and testing, Determination of content, Organic chemistry, Oxygen, Gas chromatography, Column chromatography
Download or read book Motor Gasolines written by and published by . This book was released on 1975 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Toxicological Profile for Benzene written by Oak Ridge National Laboratory and published by . This book was released on 1989 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion in Systems for Storage and Transportation of Petroleum Products and Biofuels written by Alec Groysman and published by Springer Science & Business Media. This book was released on 2014-02-17 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats corrosion as it occurs and affects processes in real-world situations, and thus points the way to practical solutions. Topics described include the conditions in which petroleum products are corrosive to metals; corrosion mechanisms of petroleum products; which parts of storage tanks containing crude oils and petroleum products undergo corrosion; dependence of corrosion in tanks on type of petroleum products; aggressiveness of petroleum products to polymeric material; how microorganisms take part in corrosion of tanks and pipes containing petroleum products; which corrosion monitoring methods are used in systems for storage and transportation of petroleum products; what corrosion control measures should be chosen; how to choose coatings for inner and outer surfaces of tanks containing petroleum products; and how different additives (oxygenates, aromatic solvents) to petroleum products and biofuels influence metallic and polymeric materials. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians.
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Handbook of Alternative Fuel Technologies Second Edition written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels—including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation—fossil fuel resources are limited and may soon be on the verge of depletion in the near future. Measuring the correlation between quality of life, energy consumption, and the efficient utilization of energy, the Handbook of Alternative Fuel Technologies, Second Edition thoroughly examines the science and technology of alternative fuels and their processing technologies. It focuses specifically on environmental, technoeconomic, and socioeconomic issues associated with the use of alternative energy sources, such as sustainability, applicable technologies, modes of utilization, and impacts on society. Written with research and development scientists and engineers in mind, the material in this handbook provides a detailed description and an assessment of available and feasible technologies, environmental health and safety issues, governmental regulations, and issues and agendas for R&D. It also includes alternative energy networks for production, distribution, and consumption. What’s New in This Edition: Contains several new chapters of emerging interest and updates various chapters throughout Includes coverage of coal gasification and liquefaction, hydrogen technology and safety, shale fuel by hydraulic fracturing, ethanol from lignocellulosics, biodiesel, algae fuels, and energy from waste products Covers statistics, current concerns, and future trends A single-volume complete reference, the Handbook of Alternative Fuel Technologies, Second Edition contains relevant information on chemistry, technology, and novel approaches, as well as scientific foundations for further enhancements and breakthroughs. In addition to its purposes as a handbook for practicing scientists and engineers, it can also be used as a textbook or as a reference book on fuel science and engineering, energy and environment, chemical process design, and energy and environmental policy.
Download or read book Making Choices about Hydrogen written by Lynn Krieger Mytelka and published by IDRC. This book was released on 2008 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the mid-1990s, the emergence of a hydrogen economy and the speed with which it will arrive have been vigorously debated. As a disruptive technology, dominant designs for the production, storage and distribution of hydrogen have not yet been established. Neither have performance characteristics been achieved to compete with the existing combustion engine, though the efficiency and durability of hydrogen fuel cells are improving. This publication highlights the uncertainties involved in making choices about hydrogen and fuel cells in planning the development policies on national energy, environment and transport sector.--Publisher's description.
Download or read book Handbook of Biofuels Production written by Rafael Luque and published by Woodhead Publishing. This book was released on 2016-05-19 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Biofuels Production, Second Edition, discusses advanced chemical, biochemical, and thermochemical biofuels production routes that are fast being developed to address the global increase in energy usage. Research and development in this field is aimed at improving the quality and environmental impact of biofuels production, as well as the overall efficiency and output of biofuels production plants. The book provides a comprehensive and systematic reference on the range of biomass conversion processes and technology. Key changes for this second edition include increased coverage of emerging feedstocks, including microalgae, more emphasis on by-product valorization for biofuels' production, additional chapters on emerging biofuel production methods, and discussion of the emissions associated with biofuel use in engines. The editorial team is strengthened by the addition of two extra members, and a number of new contributors have been invited to work with authors from the first edition to revise existing chapters, thus offering fresh perspectives. - Provides systematic and detailed coverage of the processes and technologies being used for biofuel production - Discusses advanced chemical, biochemical, and thermochemical biofuels production routes that are fast being developed to address the global increase in energy usage - Reviews the production of both first and second generation biofuels - Addresses integrated biofuel production in biorefineries and the use of waste materials as feedstocks
Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.
Download or read book Fuel Oxygenates written by Damià Barceló and published by Springer. This book was released on 2007-09-03 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals mainly with the problems associated with the contamination of groundwater by MTBE and TBA, but ETBE is also considered. The book, written by recognized specialists in the field, is organized in sections covering state-of-the-art analytical methods, including specific isotopic analysis, occurrence in the environment, transport and degradation processes, treatment technologies and human health risks.
Download or read book Applications of Environmental Aquatic Chemistry written by Eugene R. Weiner and published by CRC Press. This book was released on 2012-12-07 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals and students who come from disciplines other than chemistry need a concise yet reliable guide that explains key concepts in environmental chemistry, from the fundamental science to the necessary calculations for applying them. Updated and reorganized, Applications of Environmental Aquatic Chemistry: A Practical Guide, Third Edition provides the essential background for understanding and solving the most frequent environmental chemistry problems. Diverse and self-contained chapters offer a centralized and easily navigable framework for finding useful data tables that are ordinarily scattered throughout the literature. Worked examples provide step-by-step details for frequently used calculations, drawing on case histories from real-world environmental applications. Chapters also offer tools for calculating quick estimates of important quantities and practice problems that apply the principles to different conditions. This practical guide provides an ideal basis for self-study, as well as short courses involving the movement and fate of contaminants in the environment. In addition to extensive reorganization and updating, the Third Edition includes a new chapter, Nutrients and Odors: Nitrogen, Phosphorus, and Sulfur, two new appendices, Solubility of Slightly Soluble Metal Salts and Glossary of Acronyms and Abbreviations Used in this Book, and new material and case studies on remediation, stormwater management, algae growth and treatment, odor control, and radioisotopes.
