Download or read book Direct Liquid Fuel Cells written by Ramiz Gültekin Akay and published by Academic Press. This book was released on 2020-09-28 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Liquid Fuel Cells is a comprehensive overview of the fundamentals and specificities of the use of methanol, ethanol, glycerol, formic acid and formate, dimethyl ether, borohydride, hydrazine and other promising liquid fuels in fuel cells. Each chapter covers a different liquid fuel-based fuel cell such as: Anode catalysts of direct methanol fuel cells (DMFCs), future system designs and future trends for direct ethanol fuel cells (DEFCs), development of catalysts for direct glycerol fuel cells (DGFCs), the mechanisms of the reactions taking place at the anode and cathode electrodes, and the reported anode catalysts for direct formic acid fuel cell (DFAFC) and direct formate fuel cell (DFFC), characteristics of direct dimethyl ether fuel cell (DDMEFC), including its electrochemical and operating systems and design, the developments in direct borohydride fuel cells, the development of catalysts for direct hydrazine fuel cells (DHFCs), and also the uncommonly used liquids that have a potential for fuel cell applications including 2-propanol, ethylene glycol, ascorbic acid and ascorbate studied in the literature as well as utilization of some blended fuels. In each part, the most recent literature is reviewed and the state of the art is presented. It also includes examples of practical problems with solutions and a summarized comparison of performance, advantages, and limitations of each type of fuel cell discussed. Direct Liquid Fuel Cells is not a typical textbook but rather designed as a reference book of which any level of students (undergraduate or graduate), instructors, field specialists, industry and general audience, who benefit from current and complete understanding of the many aspects involved in the development and operation of these types of fuel cells, could make use of any chapter when necessary. Presents information on different types of direct liquid fuel cells. Explores information under each section, for specific fuel-based fuel cells in more detail in terms of the materials used. Covers three main sections: direct alcohol, organic fuel-based and inorganic fuel-based fuel cells
Download or read book Combustion of Liquid Fuel Sprays written by Alan Williams and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion of Liquid Fuel Sprays outlines the fundamentals of the combustion of sprays in a unified way which may be applied to any technological application. The book begins with a discussion of the general nature of spray combustion, the sources of liquid fuels used in spray combustion, biomass sources of liquid fuels, and the nature and properties of fuel oils. Subsequent chapters focus on the properties of sprays, the atomization of liquid fuels, and the theoretical modeling of the behavior of a spray flame in a combustion chamber. The nature and control of pollutants from spray combustion, the formation of deposits in oil-fired systems, and the combustion of sprays in furnaces and engines are elucidated as well. The text is intended for students undertaking courses or research in fuel, combustion, and energy studies.
Download or read book Modern Engineering for Design of Liquid Propellant Rocket Engines written by Dieter K. Huzel and published by AIAA. This book was released on 1992 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Hydrogen written by Walter Peschka and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the German Edition This book is based on published material, oral presentations and lecture courses, as well as the author's personal research in the specific field of space technology and in the general areas of energy storage and transfer, and cryogenics. The science and technology of liquid hydrogen-once essential prere quisites for the rapid development of space technology-are now also proving to be more and more important for the energy production of the future. Hydrogen as an energy carrier can generally mediate the existing disparity between nuclear energy and regenerative energy, both of which are indispensable for the future. Hydrogen, as a secondary energy carrier, can be produced from these primary energy sources with minimal environmental impact and without the detrimental, long-term pollution effects of current fossil fuel technology. Hydrogen, therefore, represents the ultimate in energy technology. The initial, large-scale application of hydrogen as a secondary energy was as a high-energy rocket propellant. The procedures for its large scale liquefaction, storage and employment were generally developed in the U.S. Currently in Europe similar activities are being conducted only in France. The effort in West Germany involves testing hydrogen-oxygen and hydrogen-fluorine rocket engines, studying also the physical and technical characteristics of slush hydrogen-mixture of the solid and liquid phase-and is concentrating currently on R&D applications of liquid hydrogen as an alternate fuel. Similar activities are also being conducted in Japan and Canada.
Download or read book Liquid Fuel for Mechanical and Industrial Purposes written by Edward Arthur Brayley Hodgetts and published by . This book was released on 1890 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Benefits and Challenges of Producing Liquid Fuel from Coal written by United States. Congress. House. Committee on Science and Technology (2007). Subcommittee on Energy and Environment and published by . This book was released on 2008 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Storage Stability of Fuels written by Krzysztof Biernat and published by BoD – Books on Demand. This book was released on 2015-02-04 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis of the results of studies of motor fuels ageing, conducted in laboratory and model conditions, in terms of building a system operating on-line, allowing continuous assessment of the operational usability of gasoline and diesel fuels, including those containing the addition of ethanol and FAME, respectively. This research was carried out in the framework of the project: "A system for the continuous control of the degree and rate of the liquid fuels ageing process during storage, which received co-funding from the European Regional Development Fund under the Operational Programme "Innovative Economy". The book presents an evaluation of the impact of fuel production processes on its stability and an analysis of changes in normative parameters of fuels during their storage and use. The book presents also the results of tests on the corrosive effects of fuels during storage processes. This project was co-financed by the European Regional Development Fund under the Operational Programme "Innovative Economy".
Download or read book Liquid Fuels as Jet Fuels and Propellants written by Mohammad Hossein Keshavarz and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, it has been important for scientists and chemical industries to introduce and develop new liquid fuels as jet fuels and propellants for propulsion purposes. Different aspects should be considered for the selection of a good candidate such as combustion performance, desired physical properties, noncarcinogenic and less toxicity. New synthetic hydrocarbon fuels with favorable combustion performance and physical properties have been considered as desirable jet fuels. They can be used in aircrafts such as military jets because of their higher volumetric energy density. A liquid-propellant rocket uses liquid propellants for propulsion. Liquid propellants should have the desirable properties of high energy density per unit mass, high specific impulse, and short ignition delays. Hypergolic propellants as important classes of liquid propellants are characterized by spontaneous reaction upon fuel and oxidizer mixing and high energy yield. Moreover, they should be relatively ignitable and have a small ignition time delay. This book reviews some efforts that have been done to introduce new candidates to replace conventional hydrazine fuels because they are acutely toxic and suspected carcinogens, costly safety precautions and handling procedures are required. This book reviews the latest advances in liquid fuels, which may be used as jet fuels and liquid propellants. Important properties for assessment of a suitable liquid are demonstrated. This book can be used for graduate students in the field of chemistry and chemical engineering. It may also be useful for scientists and researchers who work on the development of new liquid fuels with high performance as well as those that are noncarcinogenic or have less toxicity.
Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.
Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.
Download or read book Synthetic Liquid Fuel Potential of Utah written by United States Engineers Corps (Army). and published by . This book was released on 1950 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Synthetic Liquid Fuel Potential written by and published by . This book was released on 1951 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass Biopolymer Based Materials and Bioenergy written by Deepak Verma and published by Woodhead Publishing. This book was released on 2019-01-12 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass, Biopolymer-Based Materials and Bioenergy: Construction, Biomedical and Other Industrial Applications covers a broad range of material types, including natural fiber reinforced polymer composites, particulate composites, fiberboard, wood fiber composites, and plywood composite that utilize natural, renewable and biodegradable agricultural biomass. In terms of bioenergy, the authors explore not only the well-known processing methods of biofuels, but also the kinetics of biofuels production pathways, a techno-economic analysis on biomass gasification, and biomass gasification with further upgrading into diesel additives and hybrid renewable energy systems for power generation. Further chapters discuss advanced techniques for the development of biomass-based composites, biopolymer-based composites, biomass gasification, thermal kinetic design and techno-economic analysis of biomass gasification. By introducing these topics, the book highlights a totally new research theme in biopolymer-based composite materials and bioenergy. - Covers a broad range of different research fields, including biopolymer and natural fiber reinforcement used in the development of composites - Demonstrates key research themes in materials science and engineering, including materials processing, polymer science, biofuel processing, and thermal and kinetic studies - Presents valuable information for those working in research and development departments, and for graduate students (Masters and PhDs)
Download or read book Ignition written by John Drury Clark and published by Rutgers University Press. This book was released on 2018-05-23 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly reissued debut book in the Rutgers University Press Classics Imprint is the story of the search for a rocket propellant which could be trusted to take man into space. This search was a hazardous enterprise carried out by rival labs who worked against the known laws of nature, with no guarantee of success or safety. Acclaimed scientist and sci-fi author John Drury Clark writes with irreverent and eyewitness immediacy about the development of the explosive fuels strong enough to negate the relentless restraints of gravity. The resulting volume is as much a memoir as a work of history, sharing a behind-the-scenes view of an enterprise which eventually took men to the moon, missiles to the planets, and satellites to outer space. A classic work in the history of science, and described as “a good book on rocket stuff…that’s a really fun one” by SpaceX founder Elon Musk, readers will want to get their hands on this influential classic, available for the first time in decades.
Download or read book The Bureau of Mines Synthetic Liquid Fuels Program 1944 55 written by United States. Bureau of Mines and published by . This book was released on 1959 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Liquid Fuel Cells written by Ramiz Gültekin Akay and published by Academic Press. This book was released on 2020-09-10 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Liquid Fuel Cells is a comprehensive overview of the fundamentals and specificities of the use of methanol, ethanol, glycerol, formic acid and formate, dimethyl ether, borohydride, hydrazine and other promising liquid fuels in fuel cells. Each chapter covers a different liquid fuel-based fuel cell such as: Anode catalysts of direct methanol fuel cells (DMFCs), future system designs and future trends for direct ethanol fuel cells (DEFCs), development of catalysts for direct glycerol fuel cells (DGFCs), the mechanisms of the reactions taking place at the anode and cathode electrodes, and the reported anode catalysts for direct formic acid fuel cell (DFAFC) and direct formate fuel cell (DFFC), characteristics of direct dimethyl ether fuel cell (DDMEFC), including its electrochemical and operating systems and design, the developments in direct borohydride fuel cells, the development of catalysts for direct hydrazine fuel cells (DHFCs), and also the uncommonly used liquids that have a potential for fuel cell applications including 2-propanol, ethylene glycol, ascorbic acid and ascorbate studied in the literature as well as utilization of some blended fuels. In each part, the most recent literature is reviewed and the state of the art is presented. It also includes examples of practical problems with solutions and a summarized comparison of performance, advantages, and limitations of each type of fuel cell discussed. Direct Liquid Fuel Cells is not a typical textbook but rather designed as a reference book of which any level of students (undergraduate or graduate), instructors, field specialists, industry and general audience, who benefit from current and complete understanding of the many aspects involved in the development and operation of these types of fuel cells, could make use of any chapter when necessary. - Presents information on different types of direct liquid fuel cells. - Explores information under each section, for specific fuel-based fuel cells in more detail in terms of the materials used. - Covers three main sections: direct alcohol, organic fuel-based and inorganic fuel-based fuel cells
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
