Download or read book Challenge of Transport Telematics written by Jerzy Mikulski and published by Springer. This book was released on 2016-11-15 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 16th International Conference on Transport Systems Telematics, TST 2016, held in Katowice-Ustrón, Poland, in March 2016. The 37 full and 5 short papers presented in this volume were carefully reviewed and selected from 110 submissions. They present and organize the knowledge from within the field of intelligent transportation systems, the specific solutions applied in it and their influence on improving efficiency of transport systems.

Download or read book Advanced Engineering for Processes and Technologies written by Azman Ismail and published by Springer. This book was released on 2019-01-14 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various state-of-the-art applications for the development of new materials and technologies, discussing computer-based engineering tools that are widely used in simulations, evaluation of data and design processes. For example, modern joining technologies can be used to fabricate new compound or composite materials, even those composed of dissimilar materials. Such materials are often exposed to harsh environments and must possess specific properties. Technologies in this context are mainly related to the transportation technologies in their wider sense, i.e. automotive and marine technologies, including ships, amphibious vehicles, docks, offshore structures, and robots. This book highlights the importance the finite element and finite volume methods that are typically used in the context of engineering simulations.

Download or read book Alternative Fuels for Transportation written by A S Ramadhas and published by CRC Press. This book was released on 2016-04-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring how to counteract the world's energy insecurity and environmental pollution, this volume covers the production methods, properties, storage, engine tests, system modification, transportation and distribution, economics, safety aspects, applications, and material compatibility of alternative fuels. The esteemed editor highlights the importance of moving toward alternative fuels and the problems and environmental impact of depending on petroleum products. Each self-contained chapter focuses on a particular fuel source, including vegetable oils, biodiesel, methanol, ethanol, dimethyl ether, liquefied petroleum gas, natural gas, hydrogen, electric, fuel cells, and fuel from nonfood crops.

Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.

Download or read book FUNDAMENTALS OF INTERNAL COMBUSTION ENGINES written by H. N. GUPTA and published by PHI Learning Pvt. Ltd.. This book was released on 2012-12-10 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive introduction to the basics of Internal Combustion Engines, this book is suitable for: Undergraduate-level courses in mechanical engineering, aeronautical engineering, and automobile engineering. Postgraduate-level courses (Thermal Engineering) in mechanical engineering. A.M.I.E. (Section B) courses in mechanical engineering. Competitive examinations, such as Civil Services, Engineering Services, GATE, etc. In addition, the book can be used for refresher courses for professionals in auto-mobile industries. Coverage Includes Analysis of processes (thermodynamic, combustion, fluid flow, heat transfer, friction and lubrication) relevant to design, performance, efficiency, fuel and emission requirements of internal combustion engines. Special topics such as reactive systems, unburned and burned mixture charts, fuel-line hydraulics, side thrust on the cylinder walls, etc. Modern developments such as electronic fuel injection systems, electronic ignition systems, electronic indicators, exhaust emission requirements, etc. The Second Edition includes new sections on geometry of reciprocating engine, engine performance parameters, alternative fuels for IC engines, Carnot cycle, Stirling cycle, Ericsson cycle, Lenoir cycle, Miller cycle, crankcase ventilation, supercharger controls and homogeneous charge compression ignition engines. Besides, air-standard cycles, latest advances in fuel-injection system in SI engine and gasoline direct injection are discussed in detail. New problems and examples have been added to several chapters. Key Features Explains basic principles and applications in a clear, concise, and easy-to-read manner Richly illustrated to promote a fuller understanding of the subject SI units are used throughout Example problems illustrate applications of theory End-of-chapter review questions and problems help students reinforce and apply key concepts Provides answers to all numerical problems

Download or read book The Automotive Transmission Book written by Robert Fischer and published by Springer. This book was released on 2015-05-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential information on systems and interactions in automotive transmission technology and outlines the methodologies used to analyze and develop transmission concepts and designs. Functions of and interactions between components and subassemblies of transmissions are introduced, providing a basis for designing transmission systems and for determining their potentials and properties in vehicle-specific applications: passenger cars, trucks, buses, tractors and motorcycles. With these fundamentals the presentation provides universal resources for both state-of-the-art and future transmission technologies, including systems for electric and hybrid electric vehicles.

Download or read book Internal Combustion Engines written by Giancarlo Ferrari and published by Società Editrice Esculapio. This book was released on 2022-07-21 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines are among the most fascinating and ingenious machines which, with their invention and continuous development, have positively influenced the industrial and social history during the last century, especially by virtue of the role played as propulsion technology par excellence used in on-road private and commercial transportation. Nowadays, the growing attention towards the de-carbonization opens up new scenarios, but IC engines will continue to have a primary role in multiple sectors: automotive, marine, offroad machinery, mining, oil & gas and rail, power generation, possibly with an increasing use of non-fossil fuels. The book is organized in monothematic chapters, starting with a presentation of the general and functional characteristics of IC engines, and then dwelling on the details of the fluid exchange processes and the definition of the layout of intake and exhaust systems, obviously including the supercharging mechanisms, and continue with the description of the injection and combustion processes, to conclude with the explanation of the formation, control and reduction of pollutant emissions and radiated noise.

Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Gas Turbine Systems written by Peter Jansohn and published by Elsevier. This book was released on 2013-08-31 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern gas turbine power plants represent one of the most efficient and economic conventional power generation technologies suitable for large-scale and smaller scale applications. Alongside this, gas turbine systems operate with low emissions and are more flexible in their operational characteristics than other large-scale generation units such as steam cycle plants. Gas turbines are unrivalled in their superior power density (power-to-weight) and are thus the prime choice for industrial applications where size and weight matter the most. Developments in the field look to improve on this performance, aiming at higher efficiency generation, lower emission systems and more fuel-flexible operation to utilise lower-grade gases, liquid fuels, and gasified solid fuels/biomass. Modern gas turbine systems provides a comprehensive review of gas turbine science and engineering.The first part of the book provides an overview of gas turbine types, applications and cycles. Part two moves on to explore major components of modern gas turbine systems including compressors, combustors and turbogenerators. Finally, the operation and maintenance of modern gas turbine systems is discussed in part three. The section includes chapters on performance issues and modelling, the maintenance and repair of components and fuel flexibility.Modern gas turbine systems is a technical resource for power plant operators, industrial engineers working with gas turbine power plants and researchers, scientists and students interested in the field. - Provides a comprehensive review of gas turbine systems and fundamentals of a cycle - Examines the major components of modern systems, including compressors, combustors and turbines - Discusses the operation and maintenance of component parts

Download or read book Internal Combustion Engine Fundamentals written by John B. Heywood and published by McGraw-Hill Education. This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.

Download or read book Carbon Management written by National Research Council and published by National Academies Press. This book was released on 2001-09-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable international concerns exist about global climate change and its relationship to the growing use of fossil fuels. Carbon dioxide is released by chemical reactions that are employed to extract energy from fuels, and any regulatory policy limiting the amount of CO2 that could be released from sequestered sources or from energy-generating reactions will require substantial involvement of the chemical sciences and technology R&D community. Much of the public debate has been focused on the question of whether global climate change is occurring and, if so, whether it is anthropogenic, but these questions were outside the scope of the workshop, which instead focused on the question of how to respond to a possible national policy of carbon management. Previous discussion of the latter topic has focused on technological, economic, and ecological aspects and on earth science challenges, but the fundamental science has received little attention. This workshop was designed to gather information that could inform the Chemical Sciences Roundtable in its discussions of possible roles that the chemical sciences community might play in identifying and addressing underlying chemical questions.

Download or read book The Automotive Industry and the Environment written by P Nieuwenhuis and published by Elsevier. This book was released on 2003-07-25 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry currently faces huge challenges. The fundamental technological paradigm it relies on, volume production, has become progressively more unprofitable in the face of increasingly segmented niche markets. At the same time it faces increasing regulatory and social pressures to improve both the sustainability of its products and methods of production. Building on a wealth of research, The automotive industry and the environment addresses those challenges and how they can be met in producing a sustainable and profitable industry for the future.The authors first discuss the development of the automotive industry and the problems it currently faces. They then consider the solutions the industry can adopt. The book reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability. However, these technologies can only be fully exploited if methods of manufacture change. The book also describes models of decentralised production, particularly the micro factory retailing (MFR) model, which provide an alternative to volume production and promise to be both more sustainable and more profitable.The automotive industry and the environment provides both a cogent diagnosis of the environmental and other problems facing the industry and a blueprint for a better future. It will be widely welcomed by the industry, policy makers and all those concerned with sustainable transport. - Addresses the challenges facing the automotive industry, from the increasing unprofitability of volume production to regulatory and social pressures to improve environmental and product sustainability - Examines how the automotive industry can meet the current challenges in producing a sustainable and profitable industry for the future - Reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability

Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NFPA 58 written by and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research Methods in Business Studies written by Pervez N. Ghauri and published by Pearson Education. This book was released on 2005 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Methods in Business Studies A Practical Guide Third edition Pervez Ghauri and Kjell Gronhaug This clearly written introduction is ideal for business students taking a course in research methods, or undertaking their first dissertation or report on a work placement project. Written in a concise and accessible style, it demonstrates the importance of a scientific approach to business research and problem-solving projects. It shows students how to formulate a problem, choose a research method, argue and motivate, and how to collect, analyse and present the data. Key Features: Provides guidelines to formulate a research problem, preparing students to fully understand the questions and objectives before undertaking research. Explains the importance of methods and models to equip students with a systematic approach in thinking, executing and writing. Evaluates different qualitative and quantitative methods and their consequences on data collection and analysis so that students can choose the most appropriate research method for a given situation. Offers clear guidelines about structuring clear, concise and relevant reports. Contains detailed discussion of research theories and their practical application in business. This edition has extended coverage of international and cross-cultural research, more examples from real dissertations and research projects from diverse areas of business such as HRM and accounting, and a new chapter on qualitative research and the software used to analyse data. A concise, clear and comprehensive introduction to research methods, which equips students with a systematic approach to business research. Dr. Pervez Ghauri is Professor of International Business at Manchester Business School, The University of Manchester, UK. Dr Kjell Gronhaug is Professor of Business Studies at the Norwegian School of Economics and Business Administration, Bergen, Norway.

Download or read book Monthly Energy Review written by and published by . This book was released on 1991 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Fundamentals of the Internal Combustion Engine written by Willard W. Pulkrabek and published by Pearson. This book was released on 2013-11-01 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This applied thermoscience text explores the basic principles and applications of various types of internal combustion engines, with a major emphasis on reciprocating engines.