Download or read book Linux for Makers written by Aaron Newcomb and published by Maker Media, Inc.. This book was released on 2017-04-11 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linux is a powerful open-source operating system that has been around for many years and is widely used for running servers and websites. But most students and Makers encounter it for the first time when they are working on projects with their Raspberry Pi or similar single-board computers (SBCs) such as BeagleBone Black or Intel Galileo. Linux for Makers is the first book that explains the Linux operating system specifically for Makers, as opposed to programmers and administrators. By gaining a deeper understanding of Linux, Makers can add another useful tool to their kit that will help them build their projects more easily. Written with the Maker in mind, this book will focus mostly on Rasbian running on the Raspberry Pi as it is the most prolific in the ecosystem today. However most of the topics covered will apply broadly to other Linux distributions and will be called out when they may differ. Many times users cut and paste from a website tutorial into the Linux command line without understanding what they are actually doing only to be frustrated when they want to modify or tweak something to suit their needs. Also, many Makers shy away from using the Raspberry Pi or similar board because they feel Linux is too foreign and they think using a command line will be more difficult than using a GUI. This book aims to overcome those fears and provide a foundation for further learning and exploration. To that end, this book will focus on the basic principles that a Maker would need to know as opposed to other resources that go into detail that is not particularly relevant to building projects.

Download or read book Getting Started with BeagleBone written by Matt Richardson and published by Maker Media, Inc.. This book was released on 2013-10-04 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people think of Linux as a computer operating system, running on users' desktops and powering servers. But Linux can also be found inside many consumer electronics devices. Whether they're the brains of a cell phone, cable box, or exercise bike, embedded Linux systems blur the distinction between computer and device. Many makers love microcontroller platforms such as Arduino, but as the complexity increases in their projects, they need more power for applications, such as computer vision. The BeagleBone is an embedded Linux board for makers. It's got built-in networking, many inputs and outputs, and a fast processor to handle demanding tasks. This book introduces you to both the original BeagleBone and the new BeagleBone Black and gets you started with projects that take advantage of the board's processing power and its ability to interface with the outside world.

Download or read book The Linux Command Line 2nd Edition written by William Shotts and published by No Starch Press. This book was released on 2019-03-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: You've experienced the shiny, point-and-click surface of your Linux computer--now dive below and explore its depths with the power of the command line. The Linux Command Line takes you from your very first terminal keystrokes to writing full programs in Bash, the most popular Linux shell (or command line). Along the way you'll learn the timeless skills handed down by generations of experienced, mouse-shunning gurus: file navigation, environment configuration, command chaining, pattern matching with regular expressions, and more. In addition to that practical knowledge, author William Shotts reveals the philosophy behind these tools and the rich heritage that your desktop Linux machine has inherited from Unix supercomputers of yore. As you make your way through the book's short, easily-digestible chapters, you'll learn how to: • Create and delete files, directories, and symlinks • Administer your system, including networking, package installation, and process management • Use standard input and output, redirection, and pipelines • Edit files with Vi, the world's most popular text editor • Write shell scripts to automate common or boring tasks • Slice and dice text files with cut, paste, grep, patch, and sed Once you overcome your initial "shell shock," you'll find that the command line is a natural and expressive way to communicate with your computer. Just don't be surprised if your mouse starts to gather dust.

Download or read book Integrating Linux and Windows written by Mike McCune and published by Prentice Hall Professional. This book was released on 2001 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This clearly organized, amiably written guide provides solutions for the interoperability issues that come up when Linux and Windows are used together, including: using Samba and Linux for file and print services, implementing the best connectivity techniques, providing reliable data exchange, providing high performance cross-platform database access via ODBC, making the most of platform-independent, browser-based applications, and managing the two systems at the same workstation with boot managers, partitioning, compressed drives, and file systems. McCune is a consultant in Chicago. Annotation c. Book News, Inc., Portland, OR (booknews.com).

Download or read book Open Sources written by Chris DiBona and published by "O'Reilly Media, Inc.". This book was released on 1999-01-03 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Freely available source code, with contributions from thousands of programmers around the world: this is the spirit of the software revolution known as Open Source. Open Source has grabbed the computer industry's attention. Netscape has opened the source code to Mozilla; IBM supports Apache; major database vendors haved ported their products to Linux. As enterprises realize the power of the open-source development model, Open Source is becoming a viable mainstream alternative to commercial software.Now in Open Sources, leaders of Open Source come together for the first time to discuss the new vision of the software industry they have created. The essays in this volume offer insight into how the Open Source movement works, why it succeeds, and where it is going.For programmers who have labored on open-source projects, Open Sources is the new gospel: a powerful vision from the movement's spiritual leaders. For businesses integrating open-source software into their enterprise, Open Sources reveals the mysteries of how open development builds better software, and how businesses can leverage freely available software for a competitive business advantage.The contributors here have been the leaders in the open-source arena: Brian Behlendorf (Apache) Kirk McKusick (Berkeley Unix) Tim O'Reilly (Publisher, O'Reilly & Associates) Bruce Perens (Debian Project, Open Source Initiative) Tom Paquin and Jim Hamerly (mozilla.org, Netscape) Eric Raymond (Open Source Initiative) Richard Stallman (GNU, Free Software Foundation, Emacs) Michael Tiemann (Cygnus Solutions) Linus Torvalds (Linux) Paul Vixie (Bind) Larry Wall (Perl) This book explains why the majority of the Internet's servers use open- source technologies for everything from the operating system to Web serving and email. Key technology products developed with open-source software have overtaken and surpassed the commercial efforts of billion dollar companies like Microsoft and IBM to dominate software markets. Learn the inside story of what led Netscape to decide to release its source code using the open-source mode. Learn how Cygnus Solutions builds the world's best compilers by sharing the source code. Learn why venture capitalists are eagerly watching Red Hat Software, a company that gives its key product -- Linux -- away.For the first time in print, this book presents the story of the open- source phenomenon told by the people who created this movement.Open Sources will bring you into the world of free software and show you the revolution.

Download or read book Zero to Maker written by David Lang and published by Maker Media, Inc.. This book was released on 2017-09-27 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zero to Maker is part memoir and part how-to guidebook for anyone who is having thoughts like these: I feel like all I can do is write emails. I wish I had more hands-on skills even though I don't know what I would build... I have this one idea I've always wanted to make, but I don't know how to build it... I keep hearing about the "maker movement" but I'm not sure what that means or how I can join in... The book follows author David Lang's headfirst dive into the maker world and shows how he grew from an unskilled beginner to be a successful entrepreneur. You'll discover how to navigate this new community of makers, and find the best resources for learning the tools and skills you need to be a dynamic maker in your own right. The way we make things has changed. A new generation of tinkerers have emerged through online communities and powerful digital fabrication tools, and their creations are changing the world. This book follows the author's personal journey of transformation into a maker-entrepreneur. It is everyone's guide to combining inspiration and resources to effectively navigate this exciting new world. Lang reveals how he became a maker pro after losing his job and how the experience helped him start OpenROV, a DIY community and product line focused on underwater robotics. It all happened once he became an active member of the maker movement. Ready to take the plunge into the next Industrial Revolution? This guide provides a clear and inspiring roadmap. Take an eye-opening journey from unskilled observer to engaged maker Learn how to join this community, get access to tools and experts, and pick up new skills Use a template for building a maker-based entrepreneurial lifestyle and prepare yourself for the careers of the future This book is for everyone who dreams of becoming a successful maker-entrepreneur. It not only satisfies the aspirational aspect but shows newcomers to the maker movement exactly how to join in. First published in 2013, this new edition features full-color photos and shares David's latest insights and experiences as he continues to grow as a maker entrepreneur and citizen scientist.

Download or read book Makerspaces written by Caitlin A. Bagley and published by American Library Association. This book was released on 2014-02-06 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spaces that have been designed to allow users to create, build, and learn new projects and technologies, makerspaces employ a variety of tools such as 3-D printers, AutoCAD design software, and even open-source hardware like Arduino Kits. Developing a community around shared use of space and equipment, a tenet of the makerspace movement, fits squarely into libraries’ mission. Bagley examines nine makerspaces in public, academic, and school libraries, describing their design and technical decisions in depth and showing how each is doing something unique and different, under a wide range of budgets and project offerings. Enabling readers to quickly gather information about these trailblazing projects, Bagley’s guide Defines the makerspace, and describes why it fits perfectly into the library’s role as community center Answers common questions about implementing a makerspace project, detailing how libraries are addressing issues such as registration, usage policy, noise, software programs in digital workspaces, adapting spaces, funding, and promotion Illustrates approaches libraries are taking to staffing makerspaces, from Anchorage Public Library’s Maker in Residence and Mesa Public Library's THINKspot coordinator, to the library school students involved with University of Michigan and University of Illinois makerspace projects Covers the demographics of makerspace users, from children and teens to hobbyists and job seekers, offering guidance for targeting, marketing, and programming A sourcebook of ideas that readers can apply at their own institutions, this resource also demonstrates how makerspaces can be gathering places for people to learn how to create and build together as a community.

Download or read book Linux Device Drivers written by Jonathan Corbet and published by "O'Reilly Media, Inc.". This book was released on 2005-02-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Device drivers literally drive everything you're interested in--disks, monitors, keyboards, modems--everything outside the computer chip and memory. And writing device drivers is one of the few areas of programming for the Linux operating system that calls for unique, Linux-specific knowledge. For years now, programmers have relied on the classic Linux Device Drivers from O'Reilly to master this critical subject. Now in its third edition, this bestselling guide provides all the information you'll need to write drivers for a wide range of devices.Over the years the book has helped countless programmers learn: how to support computer peripherals under the Linux operating system how to develop and write software for new hardware under Linux the basics of Linux operation even if they are not expecting to write a driver The new edition of Linux Device Drivers is better than ever. The book covers all the significant changes to Version 2.6 of the Linux kernel, which simplifies many activities, and contains subtle new features that can make a driver both more efficient and more flexible. Readers will find new chapters on important types of drivers not covered previously, such as consoles, USB drivers, and more.Best of all, you don't have to be a kernel hacker to understand and enjoy this book. All you need is an understanding of the C programming language and some background in Unix system calls. And for maximum ease-of-use, the book uses full-featured examples that you can compile and run without special hardware.Today Linux holds fast as the most rapidly growing segment of the computer market and continues to win over enthusiastic adherents in many application areas. With this increasing support, Linux is now absolutely mainstream, and viewed as a solid platform for embedded systems. If you're writing device drivers, you'll want this book. In fact, you'll wonder how drivers are ever written without it.

Download or read book Getting Started with Raspberry Pi written by Matt Richardson and published by "O'Reilly Media, Inc.". This book was released on 2012-12-10 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: What can you do with the Raspberry Pi, a $35 computer the size of a credit card? All sorts of things! If you’re learning how to program, or looking to build new electronic projects, this hands-on guide will show you just how valuable this flexible little platform can be. This book takes you step-by-step through many fun and educational possibilities. Take advantage of several preloaded programming languages. Use the Raspberry Pi with Arduino. Create Internet-connected projects. Play with multimedia. With Raspberry Pi, you can do all of this and more. Get acquainted with hardware features on the Pi’s board Learn enough Linux to move around the operating system Pick up the basics of Python and Scratch—and start programming Draw graphics, play sounds, and handle mouse events with the Pygame framework Use the Pi’s input and output pins to do some hardware hacking Discover how Arduino and the Raspberry Pi complement each other Integrate USB webcams and other peripherals into your projects Create your own Pi-based web server with Python

Download or read book Linux For Dummies written by Richard Blum and published by John Wiley & Sons. This book was released on 2009-07-17 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fastest ways to learn Linux is with this perennial favorite Eight previous top-selling editions of Linux For Dummies can't be wrong. If you've been wanting to migrate to Linux, this book is the best way to get there. Written in easy-to-follow, everyday terms, Linux For Dummies 9th Edition gets you started by concentrating on two distributions of Linux that beginners love: the Ubuntu LiveCD distribution and the gOS Linux distribution, which comes pre-installed on Everex computers. The book also covers the full Fedora distribution. Linux is an open-source operating system and a low-cost or free alternative to Microsoft Windows; of numerous distributions of Linux, this book covers Ubuntu Linux, Fedora Core Linux, and gOS Linux, and includes them on the DVD. Install new open source software via Synaptic or RPM package managers Use free software to browse the Web, listen to music, read e-mail, edit photos, and even run Windows in a virtualized environment Get acquainted with the Linux command line If you want to get a solid foundation in Linux, this popular, accessible book is for you. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

Download or read book Free for All written by Peter Wayner and published by Createspace Independent Publishing Platform. This book was released on 2016-08-23 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Read this story of how a loose-knit group of programmers, dreamers, philosophers, geniuses and fools discovered the fact that that they could write better software in less time by just giving it all away. Follow the ecstasy, the triumphs, the battles, the failures, the treachery, the cooperation, the wrong turns, the teamwork, the struggles, and the backbiting on the road to triumph and total global domination. Show Excerpt Blue Screen of Death" that appears on Windows users' monitors when something goes irretrievably wrong is the butt of many jokes. Linux users also bragged about the quality of their desktop interface. Most of the uninitiated thought of Linux as a hacker's system built for nerds. Yet recently two very good operating shells called GNOME and KDE had taken hold. Both offered the user an environment that looked just like Windows but was better. Linux hackers started bragging that they were able to equip their girlfriends, mothers, and friends with Linux boxes without grief. Some people with little computer experience were adopting Linux with little trouble. Building websites and supercomputers is not an easy task, and it is often done in back rooms out of the sight of most people. When people began realizing that the free software hippies had slowly managed to take over a large chunk of the web server and supercomputing world, they realized that perhaps Microsoft's claim was viable. Web servers and su

Download or read book Makers written by Bob Parks and published by "O'Reilly Media, Inc.". This book was released on 2006-01-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make magazine, launched in February 2005 as the first magazine devoted to Tech DIY projects, hardware hacks, and DIY inspiration, has been hailed as "a how-to guide for the opposable thumb set" and "Popular Mechanics for the modern age." Itching to build a cockroach-controlled robot, a portable satellite radio or your very own backyard monorail? Hankering to hack a game boy or your circadian rhythms? Rather read about people who fashion laptop bags from recycled wetsuits and build shopping cart go-karts? Make is required reading. Now, following on the heels of Make's wildly popular inaugural issues, O'Reilly offers Makers, a beautiful hardbound book celebrating creativity, resourcefulness and the DIY spirit. Author Bob Parks profiles 100 people and their homebrew projects-people who make ingenious things in their backyards, basements and garages with a lot of imagination and a little applied skill. Makers features technologies old and new used in service of the serious and the amusing, the practical and the outrageous. The makers profiled are driven by a combination of curiosity, passion and plain old stick-to-itiveness to create the unique and astonishing. Most are simply hobbyists who'll never gain notoriety for their work, but that's not what motivates them to tinker. The collection explores both the projects and the characters behind them, and includes full-color photographs and instructions to inspire weekend hackers. Parks is just the man to track the quirky and outlandish in their natural maker habitats. A well-known journalist and author who covers the personalities behind the latest technologies, Parks' articles on innovations of all kinds have appeared in Wired, Outside, Business 2.0 and Make. He has contributed essays to "All Things Considered" on public radio and discussed trends in technology devices with Regis Philbin and Russ Mitchell on television. As a Wired editor, Parks directed coverage of new consumer technologies and contributed feature articles. All those who love to tinker or who fancy themselves kindred DIY spirits will appreciate Parks' eclectic and intriguing collection of independent thinkers and makers.

Download or read book Linux Bible written by Christopher Negus and published by John Wiley & Sons. This book was released on 2007-06-05 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get ready to master the basics and beyond with this in-depth guide to Linux. You’ll discover how Linux is productive enough to use as your only desktop system and powerful enough to run entire corporate enterprise installations. Plus, you’ll walk through 16 different Linux distributions, find step-by-step instructions, be introduced to new programming tools, and tap into the world of free software, all aimed at helping you succeed with Linux. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

Download or read book Exploring Raspberry Pi written by Derek Molloy and published by John Wiley & Sons. This book was released on 2016-06-09 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expand Raspberry Pi capabilities with fundamental engineering principles Exploring Raspberry Pi is the innovators guide to bringing Raspberry Pi to life. This book favors engineering principles over a 'recipe' approach to give you the skills you need to design and build your own projects. You'll understand the fundamental principles in a way that transfers to any type of electronics, electronic modules, or external peripherals, using a "learning by doing" approach that caters to both beginners and experts. The book begins with basic Linux and programming skills, and helps you stock your inventory with common parts and supplies. Next, you'll learn how to make parts work together to achieve the goals of your project, no matter what type of components you use. The companion website provides a full repository that structures all of the code and scripts, along with links to video tutorials and supplementary content that takes you deeper into your project. The Raspberry Pi's most famous feature is its adaptability. It can be used for thousands of electronic applications, and using the Linux OS expands the functionality even more. This book helps you get the most from your Raspberry Pi, but it also gives you the fundamental engineering skills you need to incorporate any electronics into any project. Develop the Linux and programming skills you need to build basic applications Build your inventory of parts so you can always "make it work" Understand interfacing, controlling, and communicating with almost any component Explore advanced applications with video, audio, real-world interactions, and more Be free to adapt and create with Exploring Raspberry Pi.

Download or read book Network World written by and published by . This book was released on 2000-09-04 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 20 years, Network World has been the premier provider of information, intelligence and insight for network and IT executives responsible for the digital nervous systems of large organizations. Readers are responsible for designing, implementing and managing the voice, data and video systems their companies use to support everything from business critical applications to employee collaboration and electronic commerce.

Download or read book EDN written by and published by . This book was released on 2006 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Getting Started with Sensors written by Kimmo Karvinen and published by Maker Media, Inc.. This book was released on 2014-08-14 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: To build electronic projects that can sense the physical world, you need to build circuits based around sensors: electronic components that react to physical phenomena by sending an electrical signal. Even with only basic electronic components, you can build useful and educational sensor projects. But if you incorporate Arduino or Raspberry Pi into your project, you can build much more sophisticated projects that can react in interesting ways and even connect to the Internet. This book starts by teaching you the basic electronic circuits to read and react to a sensor. It then goes on to show how to use Arduino to develop sensor systems, and wraps up by teaching you how to build sensor projects with the Linux-powered Raspberry Pi.