Download or read book Limits of Flammability of Gases and Vapors written by Hubert Frank Coward and published by . This book was released on 1952 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Limits of Inflammability of Gases and Vapors written by Hubert Frank Coward and published by . This book was released on 1928 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ignitability and Explosibility of Gases and Vapors written by Tingguang Ma and published by Springer. This book was released on 2015-04-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a systematic view on flammability and a collection of solved engineering problems in the fields of dilution and purge, mine gas safety, clean burning safety and gas suppression modeling. For the first time, fundamental principles of energy conservation are used to develop theoretical flammability diagrams and are then explored to understand various safety-related mixing problems. This provides the basis for a fully-analytical solution to any flammability problem. Instead of the traditional view that flammability is a fundamental material property, here flammability is discovered to be a result of the explosibility of air and the ignitability of fuel, or a process property. By exploring the more fundamental concepts of explosibility and ignitability, the safety targets of dilution and purge can be better defined and utilized for guiding safe operations in process safety. This book provides various engineering approaches to mixture flammability, benefiting not only the safety students, but also field operators, as a useful resource for the safe handling of flammable gases and liquids. It will be useful to anyone who worries about the ignition potential of a flammable mixture.

Download or read book Limits of Inflammability of Gases and Vapors written by Hubert Frank Coward and published by . This book was released on 1939 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Explosions and Their Prevention written by George Stanley Scott and published by . This book was released on 1951 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of High Pressures on the Flammability of Natural Gas air nitrogen Mixtures written by George William Jones and published by . This book was released on 1949 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.

Download or read book Low GWP A2L Refrigerant Safety written by Jason Obrzut, CMHE and published by ESCO Institute. This book was released on 2021-02-22 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the HVACR industry continues to move forward and innovate, the refrigerants that were once so commonplace are now being phased out. Replacing them are more energy efficient, environmentally friendlier refrigerants, known as Low GWP refrigerants. Many of these new refrigerants are classified by ASHRAE as A2L, or slightly flammable. The industry is also seeing expanded use of some hydrocarbon (A3) refrigerants, such as propane and isobutane. Students and technicians will require additional training for the safe handling and transportation of these refrigerants. The Low GWP refrigerant program manual covers: Refrigerant safety Introduction to Low GWP refrigerants Refrigerant properties and characteristics The refrigeration cycle Working with refrigerant blends Proper installation and service guidelines Flammable refrigerant considerations Explanation of the associated codes and standards for A2L refrigerants

Download or read book Investigation of Fire and Explosion Accidents in the Chemical Mining and Fuel related Industries written by J. M. Kuchta and published by . This book was released on 1986 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Butterworth-Heinemann. This book was released on 2005-01-10 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world's chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O'Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

Download or read book Matheson Gas Data Book written by Matheson Company, inc and published by . This book was released on 1971 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EPA 744 R written by and published by . This book was released on 1996 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flammability of Trichloroethylene written by George Stanley Scott and published by . This book was released on 1963 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biological Formation of Flammable Atmospheres written by Michael George Zabetakis and published by . This book was released on 1962 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flammability of Mixed Gases written by and published by . This book was released on 1982 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding Explosions written by Daniel A. Crowl and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many different types of explosions, each with its own complex mechanism. Understanding explosions is important in preventing them. This reference provides valuable information on explosions for everyone involved in the operation, design, maintenance, and management of chemical processes, helping enhance understanding of the nature of explosions and the practical methods required to prevent them from occurring. The text includes: Fundamental basis for explosions Explosive and flammable behavior and characteristics of materials Different types of explosions Fire and explosion hazard recognition Practical methods for preventing explosions or minimizing the potential consequences Additional references Understanding Explosions provides a practical understanding of explosion fundamentals, including the different types of explosions, the explosive and flammable behavior of materials, and the hazards related to fires and explosions. It also discusses practical methods to prevent and minimize the probability and consequence of an explosion during routine use of flammable, combustible and/or reactive materials.

Download or read book Advanced Mine Ventilation written by Pramod Thakur and published by Woodhead Publishing. This book was released on 2018-11-23 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Mine Ventilation presents the reader with a unique book providing the theory and applications for designing mine ventilation with computers, controlling respirable coal dust and diesel particulate matter, combustible gas control and, mine fire management. The book summarizes the latest knowledge created in the past 40 years in these areas. Authored by an expert in the field with 50 years' experience, the book is a great combination of theory and applications. The mine ventilation section provides computer programs (both FORTRAN and C++) to calculate not only air quantities and pressure losses but also the concentration of any pollutant in all junctions and branches of the mine network. Small particle mechanics and dust control is covered in the second section of the book. The third section on combustible gas control discusses all aspects of mine gases from origin to control. The last section on mine fire control discusses spontaneous combustion, frictional ignitions, mine explosions, and mine sealing and recovery. The book is not only a very good reference book but also an excellent textbook for two graduate level courses in Mining Engineering. Provides the latest knowledge on the four related topics of mine environment control; that is, ventilation, dust, gas, and fire in a single volume. Computer simulation of mine ventilation in both FORTRAN and C++. State-of-the-art respirable dust control. Mine degasification and methane production from a coal lease. Mine fire management.