Download or read book Limited Data Rate in Control Systems with Networks written by Hideaki Ishii and published by Springer. This book was released on 2003-07-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book incorporates data rate issues that arise in control design for systems involving communication networks. The general setup is that, given a plant, a communication channel with limited data rate and control objectives, one must find a controller that uses the channel in the feedback loop to achieve the control objectives. The theoretical question of interest is to find the minimum data rate necessary for the channel. This book is motivated by the recent developments in communication technology and aims at engineers and scientists in this field. The use of networks has become common practice in many control applications connecting sensors/actuators to controllers. The book therefore provides the fundamentals of the networks used in control systems, based on hybrid systems theory. The book focuses on the use of networks in distributed systems and on quantization in messages sent over networks.
Download or read book Limited Data Rate in Control Systems with Networks written by Hideaki Ishii and published by Springer Science & Business Media. This book was released on 2002-03-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book incorporates data rate issues that arise in control design for systems involving communication networks. The general setup is that, given a plant, a communication channel with limited data rate and control objectives, one must find a controller that uses the channel in the feedback loop to achieve the control objectives. The theoretical question of interest is to find the minimum data rate necessary for the channel. This book is motivated by the recent developments in communication technology and aims at engineers and scientists in this field. The use of networks has become common practice in many control applications connecting sensors/actuators to controllers. The book therefore provides the fundamentals of the networks used in control systems, based on hybrid systems theory. The book focuses on the use of networks in distributed systems and on quantization in messages sent over networks.
Download or read book Limited Data Rate in Control Systems with Networks microform written by Hideaki Ishii and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 2002 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Networked Control Systems written by Keyou You and published by Springer. This book was released on 2015-01-03 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph focuses on characterizing the stability and performance consequences of inserting limited-capacity communication networks within a control loop. The text shows how integration of the ideas of control and estimation with those of communication and information theory can be used to provide important insights concerning several fundamental problems such as: · minimum data rate for stabilization of linear systems over noisy channels; · minimum network requirement for stabilization of linear systems over fading channels; and · stability of Kalman filtering with intermittent observations. A fundamental link is revealed between the topological entropy of linear dynamical systems and the capacities of communication channels. The design of a logarithmic quantizer for the stabilization of linear systems under various network environments is also extensively discussed and solutions to many problems of Kalman filtering with intermittent observations are demonstrated. Analysis and Design of Networked Control Systems will interest control theorists and engineers working with networked systems and may also be used as a resource for graduate students with backgrounds in applied mathematics, communications or control who are studying such systems.
Download or read book Model Based Control of Networked Systems written by Eloy Garcia and published by Springer. This book was released on 2014-08-08 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph introduces a class of networked control systems (NCS) called model-based networked control systems (MB-NCS) and presents various architectures and control strategies designed to improve the performance of NCS. The overall performance of NCS considers the appropriate use of network resources, particularly network bandwidth, in conjunction with the desired response of the system being controlled. The book begins with a detailed description of the basic MB-NCS architecture that provides stability conditions in terms of state feedback updates. It also covers typical problems in NCS such as network delays, network scheduling, and data quantization, as well as more general control problems such as output feedback control, nonlinear systems stabilization, and tracking control. Key features and topics include: Time-triggered and event-triggered feedback updates Stabilization of uncertain systems subject to time delays, quantization, and extended absence of feedback Optimal control analysis and design of model-based networked systems Parameter identification and adaptive stabilization of systems controlled over networks The MB-NCS approach to decentralized control of distributed systems Model-Based Control of Networked Systems will appeal to researchers, practitioners, and graduate students interested in the control of networked systems, distributed systems, and systems with limited feedback.
Download or read book Packet Based Control for Networked Control Systems written by Yun-Bo Zhao and published by Springer. This book was released on 2017-09-14 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a unique, packet-based co-design control framework for networked control systems. It begins by providing a comprehensive survey of state-of-the-art research on networked control systems, giving readers a general overview of the field. It then verifies the proposed control framework both theoretically and experimentally – the former using multiple control methodologies, and the latter using a unique online test rig for networked control systems. The framework investigates in detail the most common, communication constraints, including network-induced delays, data packet dropout, data packet disorders, and network access constraints, as well as multiple controller design and system analysis tools such as model predictive control, linear matrix inequalities and optimal control. This unique and complete co-design framework greatly benefits researchers, graduate students and engineers in the fields of control theory and engineering.
Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer. This book was released on 2010-10-15 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.
Download or read book Life System Modeling and Intelligent Computing written by Minrui Fei and published by Springer. This book was released on 2010-09-08 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2010 International Conference on Life System Modeling and Simulation (LSMS 2010) and the 2010 International Conference on Intelligent Computing for Sustainable Energy and Environment (ICSEE 2010) were formed to bring together researchers and practitioners in the fields of life system modeling/simulation and intelligent computing applied to worldwide sustainable energy and environmental applications. A life system is a broad concept, covering both micro and macro components ra- ing from cells, tissues and organs across to organisms and ecological niches. To c- prehend and predict the complex behavior of even a simple life system can be - tremely difficult using conventional approaches. To meet this challenge, a variety of new theories and methodologies have emerged in recent years on life system modeling and simulation. Along with improved understanding of the behavior of biological systems, novel intelligent computing paradigms and techniques have emerged to h- dle complicated real-world problems and applications. In particular, intelligent c- puting approaches have been valuable in the design and development of systems and facilities for achieving sustainable energy and a sustainable environment, the two most challenging issues currently facing humanity. The two LSMS 2010 and ICSEE 2010 conferences served as an important platform for synergizing these two research streams.
Download or read book Dynamics And Control Of Hybrid Mechanical Systems written by Gennady A Leonov and published by World Scientific. This book was released on 2010-01-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this edited volume aim to provide a better understanding of the dynamics and control of a large class of hybrid dynamical systems that are described by different models in different state space domains. They not only cover important aspects and tools for hybrid systems analysis and control, but also a number of experimental realizations. Special attention is given to synchronization — a universal phenomenon in nonlinear science that gained tremendous significance since its discovery by Huygens in the 17th century. Possible applications of the results introduced in the book include control of mobile robots, control of CD/DVD players, flexible manufacturing lines, and complex networks of interacting agents.The book is based on the material presented at a similarly entitled minisymposium at the 6th European Nonlinear Dynamics Conference held in St Petersburg in 2008. It is unique in that it contains results of several international and interdisciplinary collaborations in the field, and reflects state-of-the-art technological development in the area of hybrid mechanical systems at the forefront of the 21st century.
Download or read book Advanced Intelligent Computing Theories and Applications With Aspects of Theoretical and Methodological Issues written by De-Shuang Huang and published by Springer. This book was released on 2007-07-31 with total page 1402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, in conjunction with the two volumes CICS 0002 and LNAI 4682, constitutes the refereed proceedings of the Third International Conference on Intelligent Computing held in Qingdao, China, in August 2007. The 139 full papers published here were carefully reviewed and selected from among 2,875 submissions. Collectively, these papers represent some of the most important findings and insights into the field of intelligent computing.
Download or read book Control Strategies and Co Design of Networked Control Systems written by Héctor Benítez-Pérez and published by Springer. This book was released on 2018-07-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Networked Control System (NCS) as a particular kind of a real-time distributed system (RTDS), composed of a set of nodes, interconnected by a network, and able to develop a complete control process. It describes important parts of the control process such as sensor and actuator activities, which rely on a real-time operating system, and a real-time communication network. As the use of common bus network architecture introduces different forms of uncertainties between sensors, actuators, and controllers, several approaches such as reconfigurable systems have been developed to tackle this problem. Moreover, modeling NCS is a challenging procedure, since there are several non-linear situations, like local saturations, uncertain time delays, dead-zones, or local situations, it is necessary to deal with. The book describes a novel strategy for modelling and control based on a fuzzy control approach and codesign strategies.
Download or read book Control Design of Multiagent Discrete Time Systems written by MagdiSadek Mahmoud and published by Springer Nature. This book was released on 2022-03-16 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an effective approach to the cooperative and coordinated control of multivehicle systems. This rigorous analytic approach guarantees the stability of coordinated and cooperating vehicles using distributed protocols and uses low-energy, event-triggered mechanisms for networked vehicle control. The text covers: design of a cooperative protocol to achieve consensus for multivehicle systems, allowing cooperation that is resistant to the effects of packet loss and/or adversarial attack; analysis and synthesis of an event-triggering mechanism for cooperative multivehicle systems over uncertain networks; and the problem of distributed leader-following consensus and methods for compelling multivehicle systems to reach consensus. Throughout the book, cooperation problems are transformed into stability problems. Lyapunov theory is used to guarantee cooperation among agents. The distributed approach is applied to triggering mechanisms, the cooperation process, and the impact of cyber-attacks. Discrete-time analysis shows how the event-based structure can be designed to match the performance of continuous-time counterparts. The book details applications and computer simulation with several practical examples. This book is of interest to a wide audience from the graduate student, through the academic researcher to the industrial practitioner, all of them sharing a common interest in the stability and security of multiagent systems.
Download or read book Wireless Networking Based Control written by Sudip K. Mazumder and published by Springer Science & Business Media. This book was released on 2010-11-25 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will have a broad appeal in the area of Wireless Networking-Based Control. Various engineering disciplines, control and communication science organizations will be interested in purchasing the book with a new, emerging, and important theme. Also, industry such as Honeywell and those (e.g. power industry, automotive industry, aerospace industry) interested in implementing wireless network control to express interest in purchasing this book.
Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.
Download or read book Fault Detection Supervision and Safety of Technical Processes 2006 written by Hong-Yue Zhang and published by Elsevier. This book was released on 2007-03-01 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable operation of technical systems is of great significance for the protection of human life and health, the environment, and of the vested economic value. The correct functioning of those systems has a profound impact also on production cost and product quality. The early detection of faults is critical in avoiding performance degradation and damage to the machinery or human life. Accurate diagnosis then helps to make the right decisions on emergency actions and repairs. Fault detection and diagnosis (FDD) has developed into a major area of research, at the intersection of systems and control engineering, artificial intelligence, applied mathematics and statistics, and such application fields as chemical, electrical, mechanical and aerospace engineering. IFAC has recognized the significance of FDD by launching a triennial symposium series dedicated to the subject. The SAFEPROCESS Symposium is organized every three years since the first symposium held in Baden-Baden in 1991. SAFEPROCESS 2006, the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes was held in Beijing, PR China. The program included three plenary papers, two semi-plenary papers, two industrial talks by internationally recognized experts and 258 regular papers, which have been selected out of a total of 387 regular and invited papers submitted. * Discusses the developments and future challenges in all aspects of fault diagnosis and fault tolerant control * 8 invited and 36 contributed sessions included with a special session on the demonstration of process monitoring and diagnostic software tools
Download or read book Control and Estimation Methods over Communication Networks written by Magdi S Mahmoud and published by Springer. This book was released on 2014-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous framework in which to study problems in the analysis, stability and design of networked control systems. Four dominant sources of difficulty are considered: packet dropouts, communication bandwidth constraints, parametric uncertainty, and time delays. Past methods and results are reviewed from a contemporary perspective, present trends are examined, and future possibilities proposed. Emphasis is placed on robust and reliable design methods. New control strategies for improving the efficiency of sensor data processing and reducing associated time delay are presented. The coverage provided features: · an overall assessment of recent and current fault-tolerant control algorithms; · treatment of several issues arising at the junction of control and communications; · key concepts followed by their proofs and efficient computational methods for their implementation; and · simulation examples (including TrueTime simulations) to provide hands-on experience. In addition to the theoretical coverage, the author describes a number of applications that demonstrate the real-world relevance of this material, and these include: · a servo system; · a triple inverted pendulum; · power system control; · wireless control of a cart with inverted pendulum and wireless servo application with emphasis on controller area networks; and · switched ethernet and wireless area networks. Researchers and graduate students working in networked and distributed control will find this text a useful guide in avoiding and ameliorating common and serious problems with these systems. The increasing prevalence of networks in many fields of engineering will make Control and Estimation Methods over Communication Networks of interest to practitioners with backgrounds in communications, process engineering, robotics, power, automotive and other areas.
Download or read book Analysis and Synthesis of Networked Control Systems written by Yuanqing Xia and published by Springer Science & Business Media. This book was released on 2011-03-14 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Synthesis of Networked Control Systems focuses on essential aspects of this field, including quantization over networks, data fusion over networks, predictive control over networks and fault detection over networks. The networked control systems have led to a complete new range of real-world applications. In recent years, the techniques of Internet of Things are developed rapidly, the research of networked control systems plays a key role in Internet of Things. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. It will be of significant interest to scientists and engineers engaged in the field of Networked Control Systems. Dr. Yuanqing Xia, a professor at Beijing Institute of Technology, has been working on control theory and its applications for over ten years.
