Download or read book Lightweight Materials in the Light duty Passenger Vehicle Market written by and published by . This book was released on 1995 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper summarizes the results of a lightweight materials study. Various lightweight materials are examined and the most cost effective are selected for further analysis. Aluminum and high-performance polymer matrix composites (PMCS) are found to have the highest potential for reducing the weight of automobiles and passenger-oriented light trucks. Weight reduction potential for aluminum and carbon fiber-based PMCs are computed based on a set of component-specific replacement criteria (such as stiffness and strength), and the consequent incremental cost scenarios are developed. The authors assume that a materials R and D program successfully reduces the cost of manufacturing aluminum and carbon fiber PMC-intensive vehicles. A vehicle choice model is used to project market shares for the lightweight vehicles. A vehicle survival and age-related usage model is employed to compute energy consumption over time for the vehicle stock. After a review of projected costs, the following two sets of vehicles are characterized to compete with the conventional materials vehicles: (1) aluminum vehicles with limited replacement providing 19% weight reduction (AIV-Mid), and (2) aluminum vehicles with the maximum replacement providing 31% weight reduction (AIV-Max). Assuming mass-market introduction in 2005, the authors project a national petroleum energy savings of 3% for AIV-Mid and 5% for AIV-Max in 2030.

Download or read book Lightweight Materials written by Flake C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

Download or read book Introducing New Materials in the Automotive Industry written by Fredrik Henriksson and published by Linköping University Electronic Press. This book was released on 2017-11-08 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passenger vehicles are central to Western society, and contribute to a significant part of our greenhouse gas emissions. In order to reduce emissions, the automotive industry as a whole is working to reduce mass in passenger vehicles in order to reduce energy consumption. One way to reduce mass is to introduce lightweight materials in the body of the vehicle. This research aims to explore the relationship between product and production system when introducing new materials. Besides a theoretical review and an industry-centered technological mapping, four case studies have been conducted during the course of this licentiate thesis. Two case studies were conducted with engineering design students working as development teams, one case study with the author as the developer and finally one case study in an industrial environment at a product owning company with in-house production. The goal of the case studies has been to increase the collective knowledge of how product development decisions affect production development decisions, and vice versa, when developing passenger vehicles in new materials. In the following analysis of case study outcomes, a number of factors important for introducing new materials are discussed. The relationship between product and production is investigated, both in terms of how the production system affects the product and how the product affects the production system. The outcome from this analysis is a mapping of important factors for automotive industry companies to understand and identify when looking at introducing new materials in existing production systems. Finally, a suggestion for future research efforts is presented.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Fuel Systems for IC Engines written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-03-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the latest conference in this successful series on fuel injection systems for internal combustion engines. It is vital for the automotive industry to continue to meet the demands of the modern environmental agenda. In order to excel, manufacturers must research and develop fuel systems that guarantee the best engine performance, ensuring minimal emissions and maximum profit. The papers from this unique conference focus on the latest technology for state-of-the-art system design, characterisation, measurement, and modelling, addressing all technological aspects of diesel and gasoline fuel injection systems. Topics range from fundamental fuel spray theory, component design, to effects on engine performance, fuel economy and emissions. Presents the papers from the IMechE conference on fuel injection systems for internal combustion engines Papers focus on the latest technology for state-of-the-art system design, characterisation, measurement and modelling; addressing all technological aspects of diesel and gasoline fuel injection systems Topics range from fundamental fuel spray theory and component design to effects on engine performance, fuel economy and emissions

Download or read book Introducing New Materials in the Automotive Industry written by Fredrik Henriksson and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Passenger vehicles are central to Western society, and contribute to a significant part of our greenhouse gas emissions. In order to reduce emissions, the automotive industry as a whole is working to reduce mass in passenger vehicles in order to reduce energy consumption. One way to reduce mass is to introduce lightweight materials in the body of the vehicle. This research aims to explore the relationship between product and production system when introducing new materials. Besides a theoretical review and an industry-centered technological mapping, four case studies have been conducted during the course of this licentiate thesis. Two case studies were conducted with engineering design students working as development teams, one case study with the author as the developer and finally one case study in an industrial environment at a product owning company with in-house production. The goal of the case studies has been to increase the collective knowledge of how product development decisions affect production development decisions, and vice versa, when developing passenger vehicles in new materials. In the following analysis of case study outcomes, a number of factors important for introducing new materials are discussed. The relationship between product and production is investigated, both in terms of how the production system affects the product and how the product affects the production system. The outcome from this analysis is a mapping of important factors for automotive industry companies to understand and identify when looking at introducing new materials in existing production systems. Finally, a suggestion for future research efforts is presented.

Download or read book The Multi Material Lightweight Vehicle MMLV Project written by David Wagner and published by SAE International. This book was released on 2015-06-05 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desire for greater fuel efficiency and reduced emissions have accelerated a shift from traditional materials to design solutions that more closely match materials and their properties with key applications. The Multi-Material Lightweight Vehicle (MMLV) Project presents cutting edge engineering that meets future challenges in a concept vehicle with weight and life-cycle assessment savings. These results significantly contribute to achieving fuel reduction and to meeting future Corporate Average Fuel Economy (CAFÉ) regulations without compromising vehicle performance or occupant safety. The MMLV Project presents: • Lightweight materials applications. • Body in white design and computer aided engineering • Engine and transmission design and lightweighting. • Full vehicle test results that are specific to the MMLV subsystems including crash, corrosion, durability and Noise Vibration and Harshness (NVH). • The Life Cycle Analysis (LCA) for the MMLV The aluminum-intensive structure, combined with carbon fiber, magnesium, and titanium results in full vehicle mass reduction of a C/D class family sedan to that of a subcompact B-car (two vehicle segments lighter). The MMLV Project presents engineering solutions that frame materials selection and applications for the future.

Download or read book Lightweight and Sustainable Composite Materials written by Sanjay Mavinkere Rangappa and published by Elsevier. This book was released on 2023-07-31 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight and Sustainable Composites Materials: Preparation, Properties and Applications focuses on the synthesis, processing and characterization of these materials, their environmental sustainability features, compatibility with composites and their broad range of commercial and industrial application fields. The combination of being both lightweight and sustainable results in unique properties that make them suitable for a broad range of advanced commercial engineering applications. The book will be a valuable reference resource for academic and industrial researchers and material scientists and engineers working in the development of lightweight and sustainable composite materials. As recent studies on these materials reveal that they process excellent mechanical, electrical and thermal properties as well as improving environmental sustainability, this book is a welcomed resource. Discusses recycling and lifecycle assessment Covers different types of lightweight materials, including polymers, metals and natural fibers Covers synthesis and characterization techniques Links production, properties and applications with sustainability behavior Considers future trends and challenges for lightweight and sustainable composite materials

Download or read book Use of Lightweight Materials in 21st Century Army Trucks written by National Research Council and published by National Academies Press. This book was released on 2003-04-02 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve the Army's envisioned Objective Force related to deployability, transportability, and mobility, the Committee on Lightweight Materials for the 21st Century Army Trucks was asked to identify research and technology development opportunities related to the introduction of new lightweight structural materials for light medium and heavy Army trucks.

Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Woodhead Publishing. This book was released on 2022-07-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. Provides a fully updated reference with significant technological advances and developments in the sector Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry

Download or read book Dynamic Response and Failure of Composite Materials and Structures written by Valentina Lopresto and published by Woodhead Publishing. This book was released on 2017-05-17 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Response and Failure of Composite Materials and Structures presents an overview of recent developments in a specialized area of research with original contributions from the authors who have been asked to outline needs for further investigations in their chosen topic area. The result is a presentation of the current state-of-the art in very specialized research areas that cannot be found elsewhere in the literature. For example, Massabò presents a newly developed theory for laminated composite plates that accounts for imperfect bonding between layers with new solutions for problems involving thermal effects. This theory is new and computationally-efficient, and the author describes how it fits in the broader context of composite plate theory. Abrate discusses the design of composite marine propellers and presents a detailed derivation of the equations of motion of a rotating blade, including centrifugal effects and the effects of pre-twisting and other geometric parameters. This book is a major reference resource for academic and industrial researchers and designers working in aerospace, automotives, and the marine engineering industry. Presents recent developments in a research field that has experienced tremendous advances because of improved computational capabilities, new materials, and new testing facilities Includes contributions from leading researchers from Europe and the USA who present the current state-of-the-art, including unique and original research Provides extensive experimental results and numerical solutions Appeals to a broad range of professional researchers working in aerospace, automotive, and marine engineering fields

Download or read book Advanced automotive technology visions of a super efficient family car written by and published by DIANE Publishing. This book was released on with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Materials and Processes in Transportation written by Dirk Lehmhus and published by John Wiley & Sons. This book was released on 2013-08-07 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightness, efficiency, durability and economic as well as ecological viability are key attributes required from materials today. In the transport industry, the performance needs are felt exceptionally strongly. This handbook and ready reference covers the use of structural materials throughout this industry, particularly for the road, air and rail sectors. A strong focus is placed on the latest developments in materials engineering. The authors present new insights and trends, providing firsthand information from the perspective of universities, Fraunhofer and independent research institutes, aerospace and automotive companies and suppliers. Arranged into parts to aid the readers in finding the information relevant to their needs: * Metals * Polymers * Composites * Cellular Materials * Modeling and Simulation * Higher Level Trends

Download or read book Transitions to Alternative Vehicles and Fuels written by National Research Council and published by National Academies Press. This book was released on 2013-04-14 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a century, almost all light-duty vehicles (LDVs) have been powered by internal combustion engines operating on petroleum fuels. Energy security concerns about petroleum imports and the effect of greenhouse gas (GHG) emissions on global climate are driving interest in alternatives. Transitions to Alternative Vehicles and Fuels assesses the potential for reducing petroleum consumption and GHG emissions by 80 percent across the U.S. LDV fleet by 2050, relative to 2005. This report examines the current capability and estimated future performance and costs for each vehicle type and non-petroleum-based fuel technology as options that could significantly contribute to these goals. By analyzing scenarios that combine various fuel and vehicle pathways, the report also identifies barriers to implementation of these technologies and suggests policies to achieve the desired reductions. Several scenarios are promising, but strong, and effective policies such as research and development, subsidies, energy taxes, or regulations will be necessary to overcome barriers, such as cost and consumer choice.