Download or read book Lightweight Energy written by Alessandra Zanelli and published by Springer Nature. This book was released on 2022-11-30 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores membrane materials as a means of translating natural and renewable resources into a more flexible, dynamic, and reactive architectural skin. It represents the first time that energy-saving design has been addressed systematically in relation to lightweight building systems and tensile membranes. Understanding of the energetic behavior of membranes and foils used as a building envelope is a fundamental theme, as it is the integration of flexible photovoltaics in membranes, as well as the exploitation of water and wind resources. A theoretical, methodological framework for consciously designing the membrane life cycle is presented. The authors cross-cut and combine exploration of climate-based design methodology and life cycle thinking strategies. Both active and passive systems are investigated, referring to alternative productive resources like sun, wind, and water. Case studies are brought forward in the book’s second half, highlighting energy lightness for an increasingly dematerialized architecture and addressing inherent issues. Four main research and development paths are presented, the first two focusing on advancements in façade materials and Photovoltaic systems applicable to membrane architecture, the third referring to fog and dew harvesting and the fourth dealing with the future frontier of flexible transparency and designs for well-being through a passive solar system.

Download or read book Environmental Assessment of Lightweight Electric Vehicles written by Patricia Egede and published by Springer. This book was released on 2016-07-25 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph adresses the challenge of the environmental assessment of leightweight electric vehicles. It poses the question whether the use of lightweight materials in electric vehicles can reduce the vehicles’ environmental impact and compares the environmental performance of a lightweight electric vehicle (LEV) to other types of vehicles. The topical approach focuses on methods from life cycle assessment (LCA), and the book concludes with a comprehensive concept on the environmental assessment of LEVs. The target audience primarily comprises LCA practitioners from research institutes and industry, but it may also be beneficial for graduate students specializing in the field of environmental assessment.

Download or read book Lightweight Electric Hybrid Vehicle Design written by John Fenton and published by Elsevier. This book was released on 2001-07-04 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight Electric/Hybrid Vehicle Design covers the particular automotive design approach required for hybrid/electrical drive vehicles. There is currently huge investment world-wide in electric vehicle propulsion, driven by concern for pollution control and depleting oil resources. The radically different design demands of these new vehicles requires a completely new approach that is covered comprehensively in this book. The book explores the rather dramatic departures in structural configuration necessary for purpose-designed electric vehicle including weight removal in the mechanical systems. It also provides a comprehensive review of the design process in the electric hybrid drive and energy storage systems. Ideal for automotive engineering students and professionals Lightweight Electric/Hybrid Vehicle Design provides a complete introduction to this important new sector of the industry. Comprehensive coverage of all design aspects of electric/hybrid cars in a single volume Packed with case studies and applications In-depth treatment written in a text book style (rather than a theoretical specialist text style)

Download or read book Lightweight Truss Framed House for Safety and Energy Efficiency written by Roger L. Tuomi and published by . This book was released on 1977 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Empirical Validation of House Energy Rating HER Software for Lightweight Housing in Cool Temperate Climates written by Mark Andrew Dewsbury and published by Springer. This book was released on 2015-02-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the first empirical validation of “AccuRate,” Australia’s national benchmark software tool for house energy ratings. The validation was conducted by the University of Tasmania in collaboration with Forest and Wood Products Australia, the Australian Government, the CSIRO and industry partners. The study presented here describes the results of graphical and statistical analysis of variations observed between the measured and simulated data from three different test buildings in Launceston, Tasmania. It shows that, while the AccuRate software is well suited to modeling energy flows, there are discrepancies between the simulated and measured temperatures of the test buildings. Moreover, it highlights possible connections between the discrepancies in all zones and the outside air temperature, wind speed, global and diffuse solar radiation, and possibly the ground model. Beyond its contribution to further investigations into the ongoing improvement and calibration of the Australian NatHERS-supported AccuRate software, this book also meticulously describes the methodology used in conducting the research, which is expected to pave the way for further studies of this type.

Download or read book The Multi Material Lightweight Vehicle MMLV Project written by David Wagner and published by SAE International. This book was released on 2015-06-05 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desire for greater fuel efficiency and reduced emissions have accelerated a shift from traditional materials to design solutions that more closely match materials and their properties with key applications. The Multi-Material Lightweight Vehicle (MMLV) Project presents cutting edge engineering that meets future challenges in a concept vehicle with weight and life-cycle assessment savings. These results significantly contribute to achieving fuel reduction and to meeting future Corporate Average Fuel Economy (CAFÉ) regulations without compromising vehicle performance or occupant safety. The MMLV Project presents: • Lightweight materials applications. • Body in white design and computer aided engineering • Engine and transmission design and lightweighting. • Full vehicle test results that are specific to the MMLV subsystems including crash, corrosion, durability and Noise Vibration and Harshness (NVH). • The Life Cycle Analysis (LCA) for the MMLV The aluminum-intensive structure, combined with carbon fiber, magnesium, and titanium results in full vehicle mass reduction of a C/D class family sedan to that of a subcompact B-car (two vehicle segments lighter). The MMLV Project presents engineering solutions that frame materials selection and applications for the future.

Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Use of Lightweight Materials in 21st Century Army Trucks written by National Research Council and published by National Academies Press. This book was released on 2003-05-02 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve the Army's envisioned Objective Force related to deployability, transportability, and mobility, the Committee on Lightweight Materials for the 21st Century Army Trucks was asked to identify research and technology development opportunities related to the introduction of new lightweight structural materials for light medium and heavy Army trucks.

Download or read book The Lightweight Fighter Program written by David C. Aronstein and published by AIAA. This book was released on 1996 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This case study outlines the development of the Lightweight Fighter program, including the development, technology, and flight test history of the YF-16 and YF-17. The streamlined and highly successful Lightweight Fighter program effectively used experimental prototypes to introduce a set of new and advanced technologies to fighter aircraft, and serves as an excellent example of technology management, risk reduction in the development process, and acquisition philosophy.

Download or read book Principles of thermal insulation with respect to lightweight concrete written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1978-06-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Uses and Placement Techniques for Lightweight Concrete in Underground Mining written by Eugene H. Skinner and published by . This book was released on 1989 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials for Lightweight Constructions written by S. Thirumalai Kumaran and published by CRC Press. This book was released on 2022-09-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the key concepts and methods involved in the development of a variety of materials for lightweight constructions, including metals, alloys, polymers and composites. It provides case studies and examples to explain strategies adapted for specific applications of the materials and covers traditional to advanced manufacturing concepts of lightweight materials, including 3D printing. It also illustrates the fundamentals and usability of biodegradable materials for achieving a greener environment, as well as possibilities of green manufacturing. Covers the fundamentals of a range of materials used for lightweight constructions Discusses fabrication and testing of materials Addresses relevant concepts of 3D printing and biodegradable materials Explores analysis of the failure mechanism of materials used in various applications Identifies the applicability of materials to a variety of situations Materials for Lightweight Constructions will suit researchers and graduate students in materials science, mechanical engineering, construction and composites.

Download or read book Integration of Alternative Sources of Energy written by Felix A. Farret and published by John Wiley & Sons. This book was released on 2006-04-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique electrical engineering approach to alternative sources ofenergy Unlike other books that deal with alternative sources of energyfrom a mechanical point of view, Integration of Alternative Sourcesof Energy takes an electrical engineering perspective. Moreover,the authors examine the full spectrum of alternative and renewableenergy with the goal of developing viable methods of integratingenergy sources and storage efficiently. Readers become thoroughlyconversant with the principles, possibilities, and limits ofalternative and renewable energy. The book begins with a general introduction and then reviewsprinciples of thermodynamics. Next, the authors explore both commonand up-and-coming alternative energy sources, including hydro,wind, solar, photovoltaic, thermosolar, fuel cells, and biomass.Following that are discussions of microturbines and inductiongenerators, as well as a special chapter dedicated to energystorage systems. After setting forth the fundamentals, the authorsfocus on how to integrate the various energy sources for electricalpower production. Discussions related to system operation,maintenance, and management, as well as standards forinterconnection, are also set forth. Throughout the book, diagrams are provided to demonstrate theelectrical operation of all the systems that are presented. Inaddition, extensive use of examples helps readers better grasp howintegration of alternative energy sources can beaccomplished. The final chapter gives readers the opportunity to learn about theHOMER Micropower Optimization Model. This computer model, developedby the National Renewable Energy Laboratory (NREL), assists in thedesign of micropower systems and facilitates comparisons of powergeneration techniques. Readers can download the software from theNREL Web site. This book is a must-read for engineers, consultants, regulators,and environmentalists involved in energy production and delivery,helping them evaluate alternative energy sources and integrate theminto an efficient energy delivery system. It is also a superiortextbook for upper-level undergraduates and graduate students.

Download or read book Lightweight and Sustainable Composite Materials written by Sanjay Mavinkere Rangappa and published by Elsevier. This book was released on 2023-07-31 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight and Sustainable Composites Materials: Preparation, Properties and Applications focuses on the synthesis, processing and characterization of these materials, their environmental sustainability features, compatibility with composites and their broad range of commercial and industrial application fields. The combination of being both lightweight and sustainable results in unique properties that make them suitable for a broad range of advanced commercial engineering applications. The book will be a valuable reference resource for academic and industrial researchers and material scientists and engineers working in the development of lightweight and sustainable composite materials. As recent studies on these materials reveal that they process excellent mechanical, electrical and thermal properties as well as improving environmental sustainability, this book is a welcomed resource. Discusses recycling and lifecycle assessment Covers different types of lightweight materials, including polymers, metals and natural fibers Covers synthesis and characterization techniques Links production, properties and applications with sustainability behavior Considers future trends and challenges for lightweight and sustainable composite materials

Download or read book Inventory of Current Energy Research and Development written by Oak Ridge National Laboratory and published by . This book was released on 1974 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerogels for Energy Saving and Storage written by Meldin Mathew and published by John Wiley & Sons. This book was released on 2024-07-02 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the energy storage applications of a wide variety of aerogels made from different materials In Aerogels for Energy Saving and Storage, an expert team of researchers delivers a one-stop resource covering the state-of-the-art in aerogels for energy applications. The book covers their morphology, properties, and processability and serves as a valuable resource for researchers and professionals working in materials science and environmentally friendly energy and power technology. The authors offer a comprehensive review of highly efficient energy applications of aerogels that bridges the gap between engineering, science, and chemistry and advances the field of materials development. They provide a Life Cycle Assessment of aerogels in energy systems, as well as discussions of their impact on the environment. Aerogel synthesis, characterization, fabrication, morphology, properties, energy-related applications, and simulations are all explored, and likely future research directions are provided. Readers will also find: A thorough introduction to aerogels in energy, including state-of-the-art advancements and challenges newly encountered Comprehensive explorations of chitin-based and cellulose-derived aerogels, as well as lignin-, clay-, and carbon nanotube-based aerogels Practical discussions of organic, natural, and inorganic aerogels, with further analyses of the lifecycle of aerogels In-depth examinations of the theory, modeling, and simulation of aerogels Perfect for chemical and environmental engineers, Aerogels for Energy Saving and Storage will also earn a place in the libraries of chemistry and materials science researchers in academia and industry.

Download or read book Advances in Processing of Lightweight Metal Alloys and Composites written by R. Vaira Vignesh and published by Springer Nature. This book was released on 2022-11-18 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important aspects of lightweight metal alloys including history, physical metallurgy, overview of production technologies, alloy development, compositing, post-processing (heat treatment, surface engineering, bulk-deformation), and joining methodologies. It discusses the microstructural evolution, fractography, morphology of corroded and worn surface to enable easy understanding of the mechanism. The topics covered in this book include lightweight metallic materials, instrumental characterization of light weight metal alloys and composites, severe plastic deformation processing of aluminum alloys, solid-state welding of aluminum alloys, aluminum metal matrix composite for automotive and aircraft applications, and heat treatment of aluminum metal matrix composites. The book is highly useful for students, researchers, academicians, scientists, and engineers working on lightweight materials.