Download or read book Lightweight Castings and Aluminum Alloys for Advanced Automotive Applications written by and published by . This book was released on 2005 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Lightweight Aluminum Alloys for Automotive Applications written by James M Boileau and published by SAE International. This book was released on 2006-02-03 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lightweight materials in automotive application has greatly increased in the past two decades. A need to meet customer demands for vehicle safety, performance and fuel efficiency has accelerated the development, evaluation and employment of new lightweight materials and processes. The 50 SAE Technical papers contained in this publication document the processes, guidelines, and physical and mechanical properties that can be applied to the selection and design of lightweight components for automotive applications. The book starts off with an introduction section containing two 1920 papers that examine the use of aluminum in automobiles.
Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials
Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Woodhead Publishing. This book was released on 2020-09-26 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Design and Manufacturing for Lightweight Vehicles, Second Edition, features the requirements for processing each material type, explains the manufacture of different categories of components, and analyzes different component joining techniques. The properties of all materials, metals, polymers and composites currently used are included along with how each one influences structural design. The new edition also contains refinements to manufacturing processes in particular hot stamping of boron steel and aluminum alloy, and new chapters on designing lightweight automotive structures & lightweight materials for powertrains and electric vehicles. With its distinguished editor and renowned team of contributors, this is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Fully updated including emphasis on optimized production methods for steels, aluminum alloys, polymers and polymer composite Covers aspects related to the production of environmentally acceptable leading-edge automobiles Explores the manufacturing process for light alloys including metal forming processes for automotive applications as well as new developments in steel technology that are making advanced high strength steels more attractive for lightweight vehicles
Download or read book Casting Aluminum Alloys written by Michael V Glazoff and published by Butterworth-Heinemann. This book was released on 2018-09-03 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casting Aluminum Alloys, Second Edition, the follow up to the fall 2007 work on the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing, discusses findings from the past decade, including sections on new casting alloys, novel casting technologies, and new methods of alloys design. The book also includes other hot topics, such as the implementation of computational technologies for the calculation of phase equilibria and thermodynamic properties of alloys, the development of software for calculation of diffusion processes in aluminum alloys, computational modeling of solidification microstructure and texture evolution of multi-component aluminum materials. In addition to changes in computational predictive abilities, there is a review of novel casting aluminum alloy compositions and properties, as well as descriptions of new casting technologies and updates to coverage on the mechanical properties of aluminum casting alloys. Presents a discussion of thermodynamic calculations used for assessing non-equilibrium solidifications of casting aluminum alloys Expands coverage of mathematical models for alloy mechanical properties, helping facilitate the selection of the best prospective candidate for new alloy development Contains a new section that describes the self-consistent evaluation of phase equilibria and thermodynamic properties of aluminum alloys
Download or read book Advances in Lightweight Automotive Castings and Wrought Aluminum Alloys written by and published by SAE International. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance Explores the manufacturing process for light alloys including metal forming processes for automotive applications
Download or read book Lightweight Materials for Automotive Applications written by and published by . This book was released on 1997 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: The replacement of cast iron by aluminum alloys in automotive engine blocks and heads represents a significant weight reduction in automobiles. The primary hurdle to the widespread use of aluminum alloy engine blocks in the North American automobile industry was high cost. The lack of wear resistance in most aluminum alloys added to manufacturing cost, since expensive procedures such as the incorporation of cast iron liners or special coatings were needed to achieve the required wear properties. The project targeted the development of a wear resistant aluminum alloy, as well as tools and the knowledge-base required to design the casting process, to allow it to be cast economically into engine blocks without the use of a cast iron liner or special coating, thereby providing benefits to both the material and manufacturing aspects of the process. The project combined the alloy development, wear and microstructural characterization, and casting modeling capabilities of the laboratory with the partners extensive alloy and casting process development and manufacturing experience to develop a suitable wear resistant aluminum alloy and casting process.
Download or read book Al Si Alloys written by Francisco C. Robles Hernandez and published by Springer. This book was released on 2017-07-02 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details aluminum alloys with special focus on the aluminum silicon (Al‐Si) systems – that are the most abundant alloys second only to steel. The authors include a description of the manufacturing principles, thermodynamics, and other main characteristics of Al‐Si alloys. Principles of processing, testing, and in particular applications in the Automotive, Aeronautical and Aerospace fields are addressed.
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Woodhead Publishing. This book was released on 2018-05-22 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Aluminium Metallurgy: Recent Advances updates the very successful book Fundamentals of Aluminium Metallurgy. As the technologies related to casting and forming of aluminum components are rapidly improving, with new technologies generating alternative manufacturing methods that improve competitiveness, this book is a timely resource. Sections provide an overview of recent research breakthroughs, methods and techniques of advanced manufacture, including additive manufacturing and 3D printing, a comprehensive discussion of the status of metalcasting technologies, including sand casting, permanent mold casting, pressure diecastings and investment casting, and recent information on advanced wrought alloy development, including automotive bodysheet materials, amorphous glassy materials, and more. Target readership for the book includes PhD students and academics, the casting industry, and those interested in new industrial opportunities and advanced products. Includes detailed and specific information on the processing of aluminum alloys, including additive manufacturing and advanced casting techniques Written for a broad ranging readership, from academics, to those in the industry who need to know about the latest techniques for working with aluminum Comprehensive, up-to-date coverage, with the most recent advances in the industry
Download or read book Powder Metallurgy Aluminum Light Alloys for Automotive Applications Conference written by William F. Jandeska and published by . This book was released on 1998 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Multi Material Lightweight Vehicle MMLV Project written by David Wagner and published by SAE International. This book was released on 2015-06-05 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desire for greater fuel efficiency and reduced emissions have accelerated a shift from traditional materials to design solutions that more closely match materials and their properties with key applications. The Multi-Material Lightweight Vehicle (MMLV) Project presents cutting edge engineering that meets future challenges in a concept vehicle with weight and life-cycle assessment savings. These results significantly contribute to achieving fuel reduction and to meeting future Corporate Average Fuel Economy (CAFÉ) regulations without compromising vehicle performance or occupant safety. The MMLV Project presents: • Lightweight materials applications. • Body in white design and computer aided engineering • Engine and transmission design and lightweighting. • Full vehicle test results that are specific to the MMLV subsystems including crash, corrosion, durability and Noise Vibration and Harshness (NVH). • The Life Cycle Analysis (LCA) for the MMLV The aluminum-intensive structure, combined with carbon fiber, magnesium, and titanium results in full vehicle mass reduction of a C/D class family sedan to that of a subcompact B-car (two vehicle segments lighter). The MMLV Project presents engineering solutions that frame materials selection and applications for the future.
Download or read book Material and Process Design for Lightweight Structures written by Talal Al-Samman and published by MDPI. This book was released on 2019-05-27 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lightweight structures across several industries has become inevitable in today’s world given the ever-rising demand for improved fuel economy and resource efficiency. In the automotive industry, composites, reinforced plastics, and lightweight materials, such as aluminum and magnesium are being adopted by many OEMs at increasing rates to reduce vehicle mass and develop efficient new lightweight designs. Automotive weight reduction with high-strength steel is also witnessing major ongoing efforts to design novel damage-controlled forming processes for a new generation of efficient, lightweight steel components. Although great progress has been made over the past decades in understanding the thermomechanical behavior of these materials, their extensive use as lightweight solutions is still limited due to numerous challenges that play a key role in cost competitiveness. Hence, significant research efforts are still required to fully understand the anisotropic material behavior, failure mechanisms, and, most importantly, the interplay between industrial processing, microstructure development, and the resulting properties. This Special Issue reprint book features concise reports on the current status in the field. The topics discussed herein include areas of manufacturing and processing technologies of materials for lightweight applications, innovative microstructure and process design concepts, and advanced characterization techniques combined with modeling of material’s behavior.
Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Woodhead Publishing. This book was released on 2022-07-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. Provides a fully updated reference with significant technological advances and developments in the sector Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry
Download or read book Advanced Automotive Technologies Annual Report to Congress Fiscal Year 1996 written by and published by . This book was released on 1998 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Lightweight Constructions written by S. Thirumalai Kumaran and published by CRC Press. This book was released on 2022-09-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the key concepts and methods involved in the development of a variety of materials for lightweight constructions, including metals, alloys, polymers and composites. It provides case studies and examples to explain strategies adapted for specific applications of the materials and covers traditional to advanced manufacturing concepts of lightweight materials, including 3D printing. It also illustrates the fundamentals and usability of biodegradable materials for achieving a greener environment, as well as possibilities of green manufacturing. Covers the fundamentals of a range of materials used for lightweight constructions Discusses fabrication and testing of materials Addresses relevant concepts of 3D printing and biodegradable materials Explores analysis of the failure mechanism of materials used in various applications Identifies the applicability of materials to a variety of situations Materials for Lightweight Constructions will suit researchers and graduate students in materials science, mechanical engineering, construction and composites.
Download or read book Advanced Aluminium Composites and Alloys written by Leszek A. Dobrzański and published by BoD – Books on Demand. This book was released on 2021-10-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an engineering material of strategic importance in the current stage of Industry 4.0. This book discusses advanced composites based on aluminium alloys. It also describes pressure infiltration of gas with liquid aluminium, the mechanical synthesis of aluminium alloy powder and halloysite nanotubes (HNTs) or multi-wall carbon nanotubes (MWCNTs) consolidated by plastic deformation, selected optimization and prediction models, casting aluminium alloys containing zirconium, aluminium alloys subjected to high-speed extrusion of shapes, corrosion resistance of alloys containing lithium, machining conditions of alloys with copper and zinc additions, and more.
