Download or read book Light Weight Alloys written by Maurizio Vedani and published by MDPI. This book was released on 2020-05-22 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is growing interest in light metallic alloys for a wide number of applications owing to their processing efficiency, processability, long service life, and environmental sustainability. Aluminum, magnesium, and titanium alloys are addressed in this Special Issue, however, the predominant role played by aluminum. The collection of papers published here covers a wide range of topics that generally characterize the performance of the alloys after manufacturing by conventional and innovative processing routes.

Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Light Metal Alloys Applications written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2014-06-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest of all metals and the sixth most abundant metal on earth. Magnesium is ductile and the most machinable of all metals. Many of these light weight alloys have appropriately high strength to warrant their use for structural purposes, and as a result of their use, the total weight of transportation equipment has been considerably decreased.

Download or read book Lightweight Alloys for Aerospace Applications written by Kumar Jata and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume from the 2001 TMS Annual Meeting & Exhibition covers advances made in the area of scientific understanding of technological application of lightweight alloys. Papers focus on fundamental science as well as application and concentrate on scientific advances in aluminum, magnesium, titanium, and beryllium alloys and their composites. Processing, structure-property relationship, failure mechanisms, and advanced joining themes are also discussed.

Download or read book Light Alloys written by I. J. Polmear and published by . This book was released on 1981 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lightweight Materials written by Flake C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lightweight Alloys for Aerospace Applications written by Kumar Jata and published by Wiley-TMS. This book was released on 2001-02 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume from the 2001 TMS Annual Meeting & Exhibition covers advances made in the area of scientific understanding of technological application of lightweight alloys. Papers focus on fundamental science as well as application and concentrate on scientific advances in aluminum, magnesium, titanium, and beryllium alloys and their composites. Processing, structure-property relationship, failure mechanisms, and advanced joining themes are also discussed.

Download or read book Advanced Light Alloys and Composites written by R. Ciach and published by Springer Science & Business Media. This book was released on 1998-09-30 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert exposition of the structural and mechanical properties of light alloys and composites, bridging the gap between scientists and industrial engineers in its consideration of advanced light materials, their structure, properties, technology and application. Includes basic problems of alloy constitution and phase transformations. The aluminium alloys are the main topic of the book, consideration being given to their properties, casting technology, thermomechanical treatment and structure. Attention is also given to the magnesium alloys, particularly those having rare earth metal constituents. Both commercial titanium alloys and intermetallic compounds are discussed, as are metallic composites. The latest engineering techniques are discussed in both theoretical and practical terms.

Download or read book Lightweight Alloys for Aerospace Applications written by K. V. Jata and published by . This book was released on 2001 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machining of Light Alloys written by Diego Carou and published by CRC Press. This book was released on 2018-08-06 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium, magnesium and titanium are alloys of special interest for engineering applications in a wide range of sectors such as aeronautics, automotive and medical. Their low density, along with sufficient mechanical properties, makes them especially adequate for sectors such as transportation allowing diminishing weight less fuel consumption and emissions to the atmosphere. Nowadays, machining is still one the most important manufacturing processes, not only for metal parts, but also for specially designed hybrid parts for more demanding new applications. A wide range of valuable research has been done on the machining of conventional engineering materials. However, when dealing with light alloys and hybrid materials containing them, they need to face new challenges. Particularly, it is important to analyse the suitability of the machining of these alloys in the current context of Industry 4.0, focusing on the development of cost-effective and sustainable processes. This book is a comprehensive source on the machining of light alloys, presenting a collection of both experimental and review studies. The work is arranged in eight chapters, presented by a group of international scholars, which analyse the main problems related to the machining of these alloys from different perspectives. Key Features A comprehensive state-of-the-art reference source on machining of light alloys Provides research on conventional and non-conventional machining process Offers current research topics on sustainable machining Presents research on the machining of hybrid materials using light alloys Includes applications for Industry 4.0 environments Machining of Light Alloys: Aluminum, Titanium, and Magnesium The aim of the book is to serve as a tool for helping researchers and practitioners to face machining challenges and facilitating the development of new industrial applications for light alloys.

Download or read book Opportunities in Protection Materials Science and Technology for Future Army Applications written by National Research Council and published by National Academies Press. This book was released on 2011-08-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Armor plays a significant role in the protection of warriors. During the course of history, the introduction of new materials and improvements in the materials already used to construct armor has led to better protection and a reduction in the weight of the armor. But even with such advances in materials, the weight of the armor required to manage threats of ever-increasing destructive capability presents a huge challenge. Opportunities in Protection Materials Science and Technology for Future Army Applications explores the current theoretical and experimental understanding of the key issues surrounding protection materials, identifies the major challenges and technical gaps for developing the future generation of lightweight protection materials, and recommends a path forward for their development. It examines multiscale shockwave energy transfer mechanisms and experimental approaches for their characterization over short timescales, as well as multiscale modeling techniques to predict mechanisms for dissipating energy. The report also considers exemplary threats and design philosophy for the three key applications of armor systems: (1) personnel protection, including body armor and helmets, (2) vehicle armor, and (3) transparent armor. Opportunities in Protection Materials Science and Technology for Future Army Applications recommends that the Department of Defense (DoD) establish a defense initiative for protection materials by design (PMD), with associated funding lines for basic and applied research. The PMD initiative should include a combination of computational, experimental, and materials testing, characterization, and processing research conducted by government, industry, and academia.

Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers

Download or read book Aerospace Alloys written by Stefano Gialanella and published by Springer Nature. This book was released on 2019-10-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an up-to-date overview on the main classes of metallic materials currently used in aeronautical structures and propulsion engines and discusses other materials of potential interest for structural aerospace applications. The coverage encompasses light alloys such as aluminum-, magnesium-, and titanium-based alloys, including titanium aluminides; steels; superalloys; oxide dispersion strengthened alloys; refractory alloys; and related systems such as laminate composites. In each chapter, materials properties and relevant technological aspects, including processing, are presented. Individual chapters focus on coatings for gas turbine engines and hot corrosion of alloys and coatings. Readers will also find consideration of applications in aerospace-related fields. The book takes full account of the impact of energy saving and environmental issues on materials development, reflecting the major shifts that have occurred in the motivations guiding research efforts into the development of new materials systems. Aerospace Alloys will be a valuable reference for graduate students on materials science and engineering courses and will also provide useful information for engineers working in the aerospace, metallurgical, and energy production industries.

Download or read book Corrosion Resistance of Aluminum and Magnesium Alloys written by Edward Ghali and published by John Wiley & Sons. This book was released on 2010-05-05 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable information on corrosion fundamentals and applications of aluminum and magnesium Aluminum and magnesium alloys are receiving increased attention due to their light weight, abundance, and resistance to corrosion. In particular, when used in automobile manufacturing, these alloys promise reduced car weights, lower fuel consumption, and resulting environmental benefits. Meeting the need for a single source on this subject, Corrosion Resistance of Aluminum and Magnesium Alloys gives scientists, engineers, and students a one-stop reference for understanding both the corrosion fundamentals and applications relevant to these important light metals. Written by a world leader in the field, the text considers corrosion phenomena for the two metals in a systematic and parallel fashion. The coverage includes: The essentials of corrosion for aqueous, high temperature corrosion, and active-passive behavior of aluminum and magnesium alloys The performance and corrosion forms of aluminum alloys The performance and corrosion forms of magnesium alloys Corrosion prevention methods such as coatings for aluminum and magnesium Electrochemical methods of corrosion investigation and their application to aluminum and magnesium alloys Offering case studies and detailed references, Corrosion Resistance of Aluminum and Magnesium Alloys provides an essential, up-to-date resource for graduate-level study, as well as a working reference for professionals using aluminum, magnesium, and their alloys.

Download or read book Material and Process Design for Lightweight Structures written by Talal Al-Samman and published by MDPI. This book was released on 2019-05-27 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lightweight structures across several industries has become inevitable in today’s world given the ever-rising demand for improved fuel economy and resource efficiency. In the automotive industry, composites, reinforced plastics, and lightweight materials, such as aluminum and magnesium are being adopted by many OEMs at increasing rates to reduce vehicle mass and develop efficient new lightweight designs. Automotive weight reduction with high-strength steel is also witnessing major ongoing efforts to design novel damage-controlled forming processes for a new generation of efficient, lightweight steel components. Although great progress has been made over the past decades in understanding the thermomechanical behavior of these materials, their extensive use as lightweight solutions is still limited due to numerous challenges that play a key role in cost competitiveness. Hence, significant research efforts are still required to fully understand the anisotropic material behavior, failure mechanisms, and, most importantly, the interplay between industrial processing, microstructure development, and the resulting properties. This Special Issue reprint book features concise reports on the current status in the field. The topics discussed herein include areas of manufacturing and processing technologies of materials for lightweight applications, innovative microstructure and process design concepts, and advanced characterization techniques combined with modeling of material’s behavior.

Download or read book Automotive Alloys written by S. K. Das and published by Minerals, Metals, & Materials Society. This book was released on 1997 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings explore the metallurgical and manufacturing issues in the alloy design, processing, and applications of aluminum and magnesium alloys in the automotive market. The focus is on the research and development efforts to design these alloys, selection, testing, recycling, and commercial applications.

Download or read book Unconventional Techniques for the Production of Light Alloys and Composites written by Jose Martin Herrera Ramirez and published by Springer Nature. This book was released on 2020-06-22 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses methods used in the synthesis of light alloys and composites for industrial applications. It begins with a broad introduction to virtually all aspects of the technology of light alloys and composite materials for aircraft and aerospace applications. The basic theory of fiber and particle reinforcements; light metallic material characteristics and composite systems; components forms, and manufacturing techniques and processes are discussed. The book then progresses to describe the production of alloys and composites by unconventional techniques, such as powder metallurgy, sandwich technique, severe plastic deformation, additive manufacturing, and thermal spray, making it appropriate for researchers in both academia and industry. It will be of special interest to aerospace engineers. Provides a broad introduction to the technology used in manufacturing light alloys and composite materials; Describes the current technologies employed in synthesizing light alloys made from advanced materials; Focuses on unconventional techniques used to produce light alloys and composites in aerospace applications.