Download or read book Light Induced Release of Nitric Oxide and Carbon Monoxide from Metal Complexes in Polymeric Systems written by Carmen Bohlender and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Light induced Release of Nitric Oxide and Carbon Monoxide from Metal Complexes written by Jingjing Liu and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The present thesis focuses on the light-responsive nitric oxide releasing molecules (NORMs) and carbon monoxide releasing molecules (CORMs) based on transition metal ruthenium (Ru) and manganese (Mn) complexes. A general introduction and brief development of NORMs and CORMs are given in the first chapter. Chapter 2 describes series of photolabile {RuNO}6 nitrosyls containing carboxamido-N and pyridine donors which fluorine substitution at different positions within the molecules thereof. In this section, the synthesis and characterization of metal nitrosyls are introduced as well as the influence of fluoro-substitution on NO-releasing studies are also investigated. In addition, the photo behaviors and mechanism analysis of the fluorinated ruthenium carbonyl complexes with same ligands as {RuNO}6 nitrosyls are represented in chapter 3. Next, the Chapter 4-6 demonstrate water soluble photo-CORMs based on manganese(I) tricarbonyls center which conjugated to a fluorobenzene group, dabsyl chromophoric ligand and nitrobenzodiazole fluorophore group, respectively. A fluorinated manganese-based photo-CORM in chapter 4 combines with 19F spectroscopy, aiming to provide a new strategy for tracking the photolysis of donor molecules through the NMR spectral change. Furthermore, the photo-CORMs presented in chapter 5 and 6 release CO under irradiation with visible light, simultaneously achieving the colorimetric and/or fluorometric response.
Download or read book Luminescent and Photoactive Transition Metal Complexes as Biomolecular Probes and Cellular Reagents written by Kenneth Kam-Wing Lo and published by Springer. This book was released on 2015-06-30 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Structure and Bonding publishes critical reviews on topics of research concerned with chemical structure and bonding. The scope of the series spans the entire Periodic Table and addresses structure and bonding issues associated with all of the elements. It also focuses attention on new and developing areas of modern structural and theoretical chemistry such as nanostructures, molecular electronics, designed molecular solids, surfaces, metal clusters and supramolecular structures. Physical and spectroscopic techniques used to determine, examine and model structures fall within the purview of Structure and Bonding to the extent that the focus is on the scientific results obtained and not on specialist information concerning the techniques themselves. Issues associated with the development of bonding models and generalizations that illuminate the reactivity pathways and rates of chemical processes are also relevant. The individual volumes in the series are thematic. The goal of each volume is to give the reader, whether at a university or in industry, a comprehensive overview of an area where new insights are emerging that are of interest to a larger scientific audience. Thus each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years should be presented using selected examples to illustrate the principles discussed. A description of the physical basis of the experimental techniques that have been used to provide the primary data may also be appropriate, if it has not been covered in detail elsewhere. The coverage need not be exhaustive in data, but should rather be conceptual, concentrating on the new principles being developed that will allow the reader, who is not a specialist in the area covered, to understand the data presented. Discussion of possible future research directions in the area is welcomed. Review articles for the individual volumes are invited by the volume editors. Readership: research scientists at universities or in industry, graduate students Special offer For all customers who have a standing order to the print version of Structure and Bonding, we offer free access to the electronic volumes of the Series published in the current year via SpringerLink.
Download or read book Metallosurfactants written by Surinder K. Mehta and published by John Wiley & Sons. This book was released on 2022-05-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallosurfactants Provides up-to-date coverage of the synthesis, properties, and applications of metallosurfactants Metallosurfactants: From Fundamentals to Catalytic and Biomedical Applications is a thorough introduction to amphiphilic compounds that allow to incorporate metal ions in the surfactant system. This comprehensive reference and guide describes the fundamentals of metal surfactant complexes, highlights recent advances in the field, and explores current and future applications and research areas. Gradually progressing from basic to advanced topics, the authors first explain the classification and characterization of metallosurfactants before delving into more complex concepts and various catalytic, sensing, and biomedical applications. The book begins with coverage of the synthesis of metallosurfactants and their surface, interfacial, and aggregation behavior. Subsequent chapters discuss applications of metallosurfactants in areas such as drug delivery, molecular machines, transfection, nanoparticle synthesis, and carbon monoxide-releasing molecules (CORMs). Other topics include the use of metallosurfactants as catalysts in organic reactions, and as anticancer and antimicrobial agents in drug delivery and formulation. This unique reference Provides an overview of the structure-function relationship, synthesis methods, and characterization of metallosurfactants Reviews current trends in metallosurfactant development and research Examines the use of metallosurfactants in a wide range of reactions, including esterolytic reactions and hydrogen generation Discusses advanced applications of metallosurfactants, e.g. as nanoreactors for nanoparticle synthesis, non-viral transfection vectors, and sensors Metallosurfactants: From Fundamentals to Catalytic and Biomedical Applications is an excellent introduction to the growing field of metallosurfactant chemistry as well as a concise, highly useful reference for researchers and scientists in both academia and industry.
Download or read book Bioinorganic Photochemistry written by Grazyna Stochel and published by John Wiley & Sons. This book was released on 2009-06-10 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioinorganic photochemistry is a rapidly evolving field integrating inorganic photochemistry with biological, medical and environmental sciences. The interactions of light with inorganic species in natural systems, and the applications in artificial systems of medical or environmental importance, form the basis of this challenging inter-disciplinary research area. Bioinorganic Photochemistry provides a comprehensive overview of the concepts and reactions fundamental to the field, illustrating important applications in biological, medical and environmental sciences. Topics covered include: Cosmic and environmental photochemistry Photochemistry of biologically relevant nanoassemblies Molecular aspects of photosynthesis Photoinduced electron transfer in biosystems Modern therapeutic strategies in photomedicine The book concludes with an outlook for the future of environmental protection, discussing emerging techniques in the field of pollution abatement, and the potential for bioinorganic photochemistry as a pathway to developing cheap, environmentally friendly sources of energy. Written as an authoritative guide for researchers involved in the development of bioinorganic photochemical processes, Bioinorganic Photochemistry is also accessible to scientists new to the field, and will be a key reference source for advanced courses in inorganic, and bioinorganic chemistry.
Download or read book Polymers for Biomedical Applications written by Anil Mahapatro and published by American Chemical Society. This book was released on 2008-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on applications of polymers for biomedical applications has increased dramatically to find improved medical plastics for this rapidly evolving field. This book brings together various aspects of recent research and developments within academia and industry related to polymers for biomedical applications.
Download or read book Inorganic Photochemistry written by and published by Academic Press. This book was released on 2011-07-14 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advances in Inorganic Chemistry series present timely and informative summaries of the current progress in a variety of subject areas within inorganic chemistry, ranging from bio-inorganic to solid state studies. This acclaimed serial features reviews written by experts in the field and serves as an indispensable reference to advanced researchers. Each volume contains an index, and each chapter is fully referenced. - Features comprehensive reviews on the latest developments - Includes contributions from leading experts in the field - Serves as an indispensable reference to advanced researchers
Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.
Download or read book Self Healing Polymers written by Wolfgang H. Binder and published by John Wiley & Sons. This book was released on 2013-03-29 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-healing is a well-known phenomenon in nature: a broken bone merges after some time and if skin is damaged, the wound will stop bleeding and heals again. This concept can be mimicked in order to create polymeric materials with the ability to regenerate after they have suffered degradation or wear. Already realized applications are used in aerospace engineering, and current research in this fascinating field shows how different self-healing mechanisms proven successful by nature can be adapted to produce even more versatile materials. The book combines the knowledge of an international panel of experts in the field and provides the reader with chemical and physical concepts for self-healing polymers, including aspects of biomimetic processes of healing in nature. It shows how to design self-healing polymers and explains the dynamics in these systems. Different self-healing concepts such as encapsulated systems and supramolecular systems are detailed. Chapters on analysis and friction detection in self-healing polymers and on applications round off the book.
Download or read book Radicals for Life written by Ernst van Faassen and published by Elsevier. This book was released on 2011-10-13 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radicals for Life: the Various Forms of Nitric Oxide provides an up-to-date overview of the role of nitrosocompounds and nitrosyl-iron complexes in physiology. Nitrosocompounds can be considered as stabilised forms of nitric oxide, one of the most important regulatory molecules in physiology today. Many nitrosocompounds share some of the physiological functions of nitric oxide, and may be formed inside living organisms. This is the first book to be published that is dedicated to the role of such nitrosocompounds in physiology, with particular emphasis on the nitrosocompounds that are endogenously formed in higher organisms and humans. Points of discussion include: physical and chemical properties of the compounds, the main chemical pathways in vivo, as well as the physiological effects that have been recognised to date. Each of the nineteen chapters is written by distinguished specialists in the field, well known for their original and important contributions to the subject. Also included are results from a wide range of studies in vitro, in cell cultures, animal models and human volunteers. Examples of alternative forms of nitric oxide, with special emphasis on their protective role against widespread human diseases like atherosclerosis, Alzheimer's disease, diabetes, sexual dysfunction, and renal insufficiency to stroke and ischemia are also included. - First monograph to consider and provide an overview of endogenous nitrosocompounds and nitrosyl-iron complexes - Extensive bibliographic references, written by specialists of human physiology - Providing high scientific quality with a focus on implications for human diseases
Download or read book Handbook of Photochemistry written by Marco Montalti and published by CRC Press. This book was released on 2006-02-21 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the second edition of this handbook in 1993, the field of photochemical sciences has continued to expand across several disciplines including organic, inorganic, physical, analytical, and biological chemistries, and, most recently, nanosciences. Emphasizing the important role light-induced processes play in all of these fie
Download or read book Semiconductor Gas Sensors written by Raivo Jaaniso and published by Woodhead Publishing. This book was released on 2019-09-24 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Gas Sensors, Second Edition, summarizes recent research on basic principles, new materials and emerging technologies in this essential field. Chapters cover the foundation of the underlying principles and sensing mechanisms of gas sensors, include expanded content on gas sensing characteristics, such as response, sensitivity and cross-sensitivity, present an overview of the nanomaterials utilized for gas sensing, and review the latest applications for semiconductor gas sensors, including environmental monitoring, indoor monitoring, medical applications, CMOS integration and chemical warfare agents. This second edition has been completely updated, thus ensuring it reflects current literature and the latest materials systems and applications. - Includes an overview of key applications, with new chapters on indoor monitoring and medical applications - Reviews developments in gas sensors and sensing methods, including an expanded section on gas sensor theory - Discusses the use of nanomaterials in gas sensing, with new chapters on single-layer graphene sensors, graphene oxide sensors, printed sensors, and much more
Download or read book Advances in Metallodrugs written by Shahid Ul-Islam and published by John Wiley & Sons. This book was released on 2020-07-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is organized into 12 important chapters that focus on the progress made by metal-based drugs as anticancer, antibacterial, antiviral, anti-inflammatory, and anti-neurodegenerative agents, as well as highlights the application areas of newly discovered metallodrugs. It can prove beneficial for researchers, investigators and scientists whose work involves inorganic and coordination chemistry, medical science, pharmacy, biotechnology and biomedical engineering.
Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemosensors written by Binghe Wang and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough, accessible, and general overview of chemosensors Providing a comprehensive overview of chemosensors organic molecules designed to bind and sense small molecules or metal ions and their applications, Chemosensors: Principles, Strategies, and Applications is an accessible one-stop resource for analysts, clinicians, and graduate students studying advanced chemistry and chemosensing. Chemosensors function on a molecular level, generating a signal upon binding. The book reviews their synthesis, design, and applications for detecting biological and organic molecules as well as metal ions. The text highlights applications in drug discovery and catalyses that have not been well covered elsewhere. Covering such topics as molecular recognition, detection methods, design strategies, and important biological issues, the book is broken into four sections that examine intermolecular interactions, strategies in sensor design, detection methods, and case studies in metal, saccharide, and amino acid sensing. An indispensable source of information for chemical and biomedical experts using sensors, Chemosensors includes case studies to make the material both accessible and understandable to chemists of all backgrounds.
Download or read book Gas Separation Membranes written by Ahmad Fauzi Ismail and published by Springer. This book was released on 2015-04-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the tremendous progress that has been made in the development of gas separation membranes based both on inorganic and polymeric materials. Materials discussed include polymer inclusion membranes (PIMs), metal organic frameworks (MOFs), carbon based materials, zeolites, as well as other materials, and mixed matrix membranes (MMMs) in which the above novel materials are incorporated. This broad survey of gas membranes covers material, theory, modeling, preparation, characterization (for example, by AFM, IR, XRD, ESR, Positron annihilation spectroscopy), tailoring of membranes, membrane module and system design, and applications. The book is concluded with some perspectives about the future direction of the field.
Download or read book Drug Delivery Systems Advanced Technologies Potentially Applicable in Personalised Treatment written by Jorge Coelho and published by Springer Science & Business Media. This book was released on 2013-03-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a series dedicated to recent advances on preventive, predictive and personalised medicine (PPPM). It focuses on the theme of “Drug delivery systems: advanced technologies potentially applicable in personalised treatments”. The critical topics involving the development and preparation of effective drug delivery systems, such as: polymers available, self-assembly, nanotechnology, pharmaceutical formulations, three dimensional structures, molecular modeling, tailor-made solutions and technological tendencies, are carefully discussed. The understanding of these areas constitutes a paramount route to establish personalised and effective solutions for specific diseases and individuals.
