Download or read book Life time Analysis of Continuous Beam Bridges with Integral Abutments Using Rheological Models written by Chiu Ming Tsang and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integral Bridges written by George L. England and published by Thomas Telford. This book was released on 2000 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was commissioned by the Highways Agency to produce guidance for bridge designers by addressing the thermally induced soil/structure integration problem created by environmental changes of temperature and the associated cyclical displacements imposed on the granular backfill to the bridge abutments. It develops a better theoretical understanding of the cyclic performance, in particular the strain racheting in the backfill soil when in contact with a stiff structure. It also identifies the governing soil parameters and examines their influence in the interaction problem, develops numerical modelling procedures to predict interactive soil behaviour, and identifies and quantifies the controlling features of bridge structures relevant to the interaction problem.
Download or read book British National Bibliography for Report Literature written by and published by . This book was released on 2000 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Plated Structures written by Darko Beg and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to provide practical advice to designers of plated structures for correct and efficient application of EN 1993-1-5 design rules. In chapter 1 the purpose, the scope and the structure of the book is explained. In chapter 2 a rather detailed and commented overview of EN 1993-1-5 design rules is given following the structure of the standard. Shear lag effect as well as plate buckling problems due to direct stresses, shear forces, transverse forces and interactions of these effects are covered. This chapter also includes a reduced stress method and a finite element analysis approach to plate buckling problems. A large number of design examples illustrate the proper application of individual design rules. Chapter 3 and 4 bring two complete design examples on a crane runway and a box-girder bridge.
Download or read book Recent Advances and Applications of Hybrid Simulation written by Wei Song and published by Frontiers Media SA. This book was released on 2021-01-13 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precast segmental bridges written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2017-08-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of precast segmental bridges is not new: the first application documented was from the mid-1940s, designed by Eugene Freyssinet and built over the river Marne near Luzancy in France, between 1944 and 1946. Although innovative, it also contained traditional wet concrete joints between the members. The impressive breakthrough came slightly later with the introduction of match-cast joints by Jean Muller, first for a bridge near Buffalo (USA) in 1952, and later for a bridge across the River Seine at Choisy le Roi near Paris in 1962. This opened the way for a large number of new developments in terms of design, production approaches and construction techniques, and precast prestressed concrete segmental construction became rapidly one of the most efficient and successful bridge construction methods all over the world. These developments are still evolving, but the interaction between design, production and construction is a critical factor for success: the interaction creates opportunities to optimise the scheme, but at the same time is crucial to ensure safety, especially during construction, when large weights are moved, placed and secured, frequently at substantial heights. Engineers of all disciplines involved should interact during the development and realisation of precast segmental bridge (PSB) schemes, to conclude the optimum method statement and consequently check all the intermediate steps of the method statement in terms of stress, stiffness, stability, production and constructability. With the ongoing development of the PSB concept, and consequently moving limits in terms of dimensions, it was concluded to be appropriate to develop a Guide to good practice for the PSB construction method. The present report was developed by an integrated team of engineers with roots in design, structural engineering, production and construction, and provides a valuable source of knowledge, experience, recommendations and examples, with particular emphasis on the fib Model Code for Concrete Structures 2010 and fib Bulletins 20, 33, 48 and 75. I would like to thank all the members of Task Group 1.7, all the individual contributors from outside Task Group 1.7, and the reviewers of the Technical Council of the fib for their contribution to this Guide to good practice. In particular, I would like to thank Gopal Srinivasan and Marcos Sanchez, who, apart from their own contributions, did the final editorial work for this bulletin.
Download or read book Design of Highway Bridges written by Richard M. Barker and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of bridge design and analysis revised to reflect the fifth edition of the AASHTO LRFD specifications Design of Highway Bridges, Third Edition offers detailed coverage of engineering basics for the design of short- and medium-span bridges. Revised to conform with the latest fifth edition of the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications, it is an excellent engineering resource for both professionals and students. This updated edition has been reorganized throughout, spreading the material into twenty shorter, more focused chapters that make information even easier to find and navigate. It also features: Expanded coverage of computer modeling, calibration of service limit states, rigid method system analysis, and concrete shear Information on key bridge types, selection principles, and aesthetic issues Dozens of worked problems that allow techniques to be applied to real-world problems and design specifications A new color insert of bridge photographs, including examples of historical and aesthetic significance New coverage of the "green" aspects of recycled steel Selected references for further study From gaining a quick familiarity with the AASHTO LRFD specifications to seeking broader guidance on highway bridge design Design of Highway Bridges is the one-stop, ready reference that puts information at your fingertips, while also serving as an excellent study guide and reference for the U.S. Professional Engineering Examination.
Download or read book Advanced Technology in Structural Engineering written by Mohamed Elgaaly and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains the papers presented at the 2000 Structures Congress & Exposition held on May 8-10, 2000, in Philadelphia, Pennsylvania. The themes include: 14th Analysis & Computational Specialty Conference, Bridges, Buildings, Dynamics/Wind/Seismic, Steel structures, Timber/Composites/Concrete, Practical design & detailing. The goal of the Congress is to cover the advanced technology of structural engineering. Topics range from the latest research developments to practical applications of structural engineering principles.
Download or read book Design of Steel Concrete Composite Bridges to Eurocodes written by Ioannis Vayas and published by CRC Press. This book was released on 2013-08-29 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Steel-Concrete Composite Bridges to Eurocodes centers on the new design rules incorporated in the EN-versions of the Eurocodes. This book targets students, especially at MSc level, and practicing engineers who need to become familiar with the new design rules incorporated in the EN-versions of the Eurocodes. Its focuses primarily on road bridges, although some information is provided for railway bridges, and presents the material in a concise manner.
Download or read book Creep and Shrinkage written by Hubert Rüsch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on Reinforced Concrete-Prestressed Concrete, Volume 2, Accounting for the Effects of Creep and Shrinkage on the Behavior of Structural Systems by Hubert Rusch and Dieter Jungwirth, which appeared in German in 1976. Even then, it was Hubert Rusch's fervent wish to have his thoughts on the deformations of concrete translated into English in order to reach a wider audience. His earlier efforts to contribute a study to the Series of Monographs of the Ameri can Institute had unfortunately not succeeded. Despite a serious illness, Hubert Rusch undertook, with his characteristic prudence and thoroughness, the preparatory work for the translation and related revision of his book. Unfortunately fate did not grant him the satisfaction of seeing his work completed. Hubert Rusch died on October 17, 1979. In writing this book, Hubert Rusch drew on his many years of devoted study of the creep problem. These investigations go back to 1934. His awareness of the plastic deformation of concrete under sustained load, which had been reported to him on the occasion of an American sojourn, led him to discover the causes of a major building collapse. At his urging, Professor A. Hummel published, in 1935, a critical survey of the test results then available on concrete creep.
Download or read book Forensic Engineering written by Alicia Díazde León and published by . This book was released on 2012-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Sixth Congress on Forensic Engineering, held in San Francisco, California, October 31-November 3, 2012. Sponsored by the Technical Council on Forensic Engineering of ASCE. This collection contains 144 peer-reviewed papers presenting findings intended to help forensic engineers develop practices and procedures to reduce the number of failures, disseminate information on failures, and provide guidelines for conducting failure investigations and for ethical conduct. Topics include: bridges; building envelopes; critical infrastructure; design practices; disaster risk management; education; emerging technologies; fires; floods; flooring; geotechnical failures; hurricanes, tornadoes, and extreme winds; investigative methodologies; practices to reduce failures; professional practice; research and testing; residential construction; and structural failures. This will be valuable to engineers, researchers, educators, and students involved in forensic engineering.
Download or read book Safety Inspection Procedures written by United States. Bureau of Labor Standards and published by . This book was released on 1967 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Trends in Civil Engineering written by K. K. Pathak and published by Springer Nature. This book was released on 2020-09-27 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed proceedings of the International Conference on Recent Trends and Innovations in Civil Engineering (ICRTICE 2019). The volume focuses on latest research and advances in the field of civil engineering and materials science such as design and development of new environmental materials, performance testing and verification of smart materials, performance analysis and simulation of steel structures, design and performance optimization of concrete structures, and building materials analysis. The book also covers studies in geotechnical engineering, hydraulic engineering, road and bridge engineering, building services design, engineering management, water resource engineering and renewable energy. The contents of this book will be useful for students, researchers and professionals working in civil engineering.
Download or read book Advances in Computer Methods and Geomechanics written by Amit Prashant and published by Springer Nature. This book was released on 2020-01-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers from IACMAG Symposium,The major themes covered in this conference are Earthquake Engineering, Ground Improvement and Constitutive Modelling. This volume will be of interest to researchers and practitioners in geotechnical and geomechanical engineering.
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Computational Structural Engineering written by Yong Yuan and published by Springer Science & Business Media. This book was released on 2009-06-05 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the great progress made in computing technology, both in computer and programming technology, computation has become one of the most powerful tools for researchers and practicing engineers. It has led to tremendous achievements in computer-based structural engineering and there is evidence that current devel- ments will even accelerate in the near future. To acknowledge this trend, Tongji University, Vienna University of Technology, and Chinese Academy of Engine- ing, co-organized the International Symposium on Computational Structural En- neering 2009 in Shanghai (CSE’09). CSE’09 aimed at providing a forum for presentation and discussion of sta- of-the-art development in scientific computing applied to engineering sciences. Emphasis was given to basic methodologies, scientific development and engine- ing applications. Therefore, it became a central academic activity of the Inter- tional Association for Computational Mechanics (IACM), the European Com- nity on Computational Methods in Applied Sciences (ECCOMAS), The Chinese Society of Theoretical and Applied Mechanic, the China Civil Engineering So- ety, and the Architectural Society of China. A total of 10 invited papers, and around 140 contributed papers were p- sented in the proceedings of the symposium. Contributors of papers came from 20 countries around the world and covered a wide spectrum related to the compu- tional structural engineering.
Download or read book Smart Structures written by Jan Holnicki-Szulc and published by Springer Science & Business Media. This book was released on 1999-02-28 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart (intelligent) structures have been the focus of a great deal of recent research interest. In this book, leading researchers report the state of the art and discuss new ideas, results and trends in 43 contributions, covering fundamental research issues, the role of intelligent monitoring in structural identification and damage assessment, the potential of automatic control systems in achieving a desired structural behaviour, and a number of practical issues in the analysis and design of smart structures in mechanical and civil engineering applications. Audience: A multidisciplinary reference for materials scientists and engineers in such areas as mechanical, civil, aeronautical, electrical, control, and computer engineering.
