Download or read book Life Cycle Technoeconomic Modeling written by Antonio Colmenar Santos and published by MDPI. This book was released on 2020-12-02 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to perform an impartial analysis to evaluate the implications of the environmental costs and impacts of a wide range of technologies and energy strategies. This information is intended to be used to support decision-making by groups, including researchers, industry, regulators, and policy-makers. Life cycle assessment (LCA) and technoeconomic analysis can be applied to a wide variety of technologies and energy strategies, both established and emerging. LCA is a method used to evaluate the possible environmental impacts of a product, material, process, or activity. It assesses the environmental impact throughout the life cycle of a system, from the acquisition of materials to the manufacture, use, and final disposal of a product. Technoeconomic analysis refers to cost evaluations, including production cost and life cycle cost. Often, in order to carry out technoeconomic analysis, researchers are required to obtain data on the performance of new technologies that operate on a very small scale in order to subsequently design configurations on a commercial scale and estimate the costs of such expansions. The results of the developed models help identify possible market applications and provide an estimate of long-term impacts. These methods, together with other forms of decision analysis, are very useful in the development and improvement of energy objectives, since they will serve to compare different decisions, evaluating their political and economic feasibility and providing guidance on potential financial and technological risks.

Download or read book Life Cycle Technoeconomic Modeling written by Antonio Colmenar Santos and published by . This book was released on 2020 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to perform an impartial analysis to evaluate the implications of the environmental costs and impacts of a wide range of technologies and energy strategies. This information is intended to be used to support decision-making by groups, including researchers, industry, regulators, and policy-makers. Life cycle assessment (LCA) and technoeconomic analysis can be applied to a wide variety of technologies and energy strategies, both established and emerging. LCA is a method used to evaluate the possible environmental impacts of a product, material, process, or activity. It assesses the environmental impact throughout the life cycle of a system, from the acquisition of materials to the manufacture, use, and final disposal of a product. Technoeconomic analysis refers to cost evaluations, including production cost and life cycle cost. Often, in order to carry out technoeconomic analysis, researchers are required to obtain data on the performance of new technologies that operate on a very small scale in order to subsequently design configurations on a commercial scale and estimate the costs of such expansions. The results of the developed models help identify possible market applications and provide an estimate of long-term impacts. These methods, together with other forms of decision analysis, are very useful in the development and improvement of energy objectives, since they will serve to compare different decisions, evaluating their political and economic feasibility and providing guidance on potential financial and technological risks.

Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.

Download or read book Microalgae Cultivation for Biofuels Production written by Abu Yousuf and published by Academic Press. This book was released on 2019-11-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microalgae Cultivation for Biofuels Production explores the technological opportunities and challenges involved in producing economically competitive algal-derived biofuel. The book discusses efficient methods for cultivation, improvement of harvesting and lipid extraction techniques, optimization of conversion/production processes of fuels and co-products, the integration of microalgae biorefineries to several industries, environmental resilience by microalgae, and a techno-economic and lifecycle analysis of the production chain to gain maximum benefits from microalgae biorefineries. Provides an overview of the whole production chain of microalgal biofuels and other bioproducts Presents an analysis of the economic and sustainability aspects of the production chain Examines the integration of microalgae biorefineries into several industries

Download or read book Carbon Dioxide Utilisation written by Peter Styring and published by Elsevier. This book was released on 2014-09-13 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Dioxide Utilisation: Closing the Carbon Cycle explores areas of application such as conversion to fuels, mineralization, conversion to polymers, and artificial photosynthesis as well as assesses the potential industrial suitability of the various processes. After an introduction to the thermodynamics, basic reactions, and physical chemistry of carbon dioxide, the book proceeds to examine current commercial and industrial processes, and the potential for carbon dioxide as a green and sustainable resource. While carbon dioxide is generally portrayed as a "bad" gas, a waste product, and a major contributor to global warming, a new branch of science is developing to convert this "bad" gas into useful products. This book explores the science behind converting CO2 into fuels for our cars and planes, and for use in plastics and foams for our homes and cars, pharmaceuticals, building materials, and many more useful products. Carbon dioxide utilization is a rapidly expanding area of research that holds a potential key to sustainable, petrochemical-free chemical production and energy integration. Accessible and balanced between chemistry, engineering, and industrial applications Informed by blue-sky thinking and realistic possibilities for future technology and applications Encompasses supply chain sustainability and economics, processes, and energy integration

Download or read book Techno economics and Life Cycle Assessment of Bioreactors written by Puranjan Mishra and published by Elsevier. This book was released on 2022-06-14 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techno-economics and Life Cycle Assessment of Bioreactors: Post-Covid19 Waste Management Approach covers the emerging trends in bioreactor research, including techno-economics and life cycle assessment perspectives, both key considerations in making the anaerobic-digestion process technically feasible, economically viable and environmentally sustainable. The book is divided into three sections, with an introductory chapter on the impact of COVID-19 on existing practices of waste and resource management. Sections cover advances in bioreactor development for enhanced valorization of waste, the techno-economics of the different bioreactor systems, the life cycle assessment of bioreactors, their methodological challenges and future perspectives. Providing a holistic overview of bioreactors and taking into account recent trends in their design, the chapters also highlight the advances needed to manage COVID-19 waste in a sustainable manner. With contributions from leading experts in bioreactor and life cycle assessment, this book will be an invaluable reference source for academics working on anaerobic digesters and energy sustainability, as well as for research and development professionals in the renewable energy industry, and scientists and engineers working on clean and efficient energy generation from wastes. Reinforces our understanding of the basic concepts and applications of bioreactors Includes a comprehensive evaluation of “Techno-economics and “Environmental impact analysis through a life cycle assessment approach Covers bioreactor advancements and a prognosis for the maximum utilization of waste for the increase transformation of waste to wealth Enables the broad range spectrum of potential technological and environmental impacts occurring across product generation

Download or read book Algae for Biofuels and Energy written by Michael A. Borowitzka and published by Springer Science & Business Media. This book was released on 2012-12-11 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microalgae are one of the most studied potential sources of biofuels and bioenergy. This book covers the key steps in the production of renewable biofuels from microalgae - strain selection, culture systems, inorganic carbon utilisation, lipid metabolism and quality, hydrogen production, genetic engineering, biomass harvesting, extraction. Greenhouse gas and techno-economic modelling are reviewed as is the 100 year history of microalgae as sources of biofuels and of commercial-scale microalgae culture. A summary of relevant basic standard methods used in the study of microalgae culture is provided. The book is intended for the expert and those starting work in the field.​

Download or read book Techno economic Paradigms written by Wolfgang J. M. Drechsler and published by Anthem Press. This book was released on 2009 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Techno-Economic Paradigms' presents a series of essays discussing one of the most interesting and talked-about socio-economic theories of our times: techno-economic paradigm shifts.

Download or read book Life Cycle Assessment of Biorefineries written by Edgard Gnansounou and published by Elsevier. This book was released on 2016-12-20 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life-Cycle Assessment of Biorefineries, the sixth and last book in the series on biomass-biorefineries discusses the unprecedented growth and development in the emerging concept of a global bio-based economy in which biomass-based biorefineries have attained center stage for the production of fuels and chemicals. It is envisaged that by 2020 a majority of chemicals currently being produced through a chemical route will be produced via a bio-based route. Agro-industrial residues, municipal solid wastes, and forestry wastes have been considered as the most significant feedstocks for such bio-refineries. However, for the techno-economic success of such biorefineries, it is of prime and utmost importance to understand their lifecycle assessment for various aspects. Provides state-of-art information on the basics and fundamental principles of LCA for biorefineries Contains key features for the education and understanding of integrated biorefineries Presents models that are used to cope with land-use changes and their effects on biorefineries Includes relevant case studies that illustrate main points

Download or read book Sustainable planning and life cycle thinking of energy infrastructure written by Nallapaneni Manoj Kumar and published by Frontiers Media SA. This book was released on 2023-05-12 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Life Cycle Assessment LCA of Environmental and Energy Systems written by Fabrizio Passarini and published by MDPI. This book was released on 2021-04-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transition towards renewable energy sources and “green” technologies for energy generation and storage is expected to mitigate the climate emergency in the coming years. However, in many cases, this progress has been hampered by our dependency on critical materials or other resources that are often processed at high environmental burdens. Yet, many studies have shown that environmental and energy issues are strictly interconnected and require a comprehensive understanding of resource management strategies and their implications. Life cycle assessment (LCA) is among the most inclusive analytical techniques to analyze sustainability benefits and trade-offs within complex systems and, in this Special Issue, it is applied to assess the mutual influences of environmental and energy dimensions. The selection of original articles, reviews, and case studies addressed covers some of the main driving applications for energy requirements and greenhouse gas emissions, including power generation, bioenergy, biorefinery, building, and transportation. An insightful perspective on the current topics and technologies, and emerging research needs, is provided. Alone or in combination with integrative methodologies, LCA can be of pivotal importance and constitute the scientific foundation on which a full system understanding can be reached.

Download or read book Mathematical Modeling of Fluid Flow and Heat Transfer in Petroleum Industries and Geothermal Applications written by Mehrdad Massoudi and published by MDPI. This book was released on 2020-04-16 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy is the thermal energy generated and stored in the Earth's core, mantle, and crust. Geothermal technologies are used to generate electricity and to heat and cool buildings. To develop accurate models for heat and mass transfer applications involving fluid flow in geothermal applications or reservoir engineering and petroleum industries, a basic knowledge of the rheological and transport properties of the materials involved (drilling fluid, rock properties, etc.)—especially in high-temperature and high-pressure environments—are needed. This Special Issue considers all aspects of fluid flow and heat transfer in geothermal applications, including the ground heat exchanger, conduction and convection in porous media. The emphasis here is on mathematical and computational aspects of fluid flow in conventional and unconventional reservoirs, geothermal engineering, fluid flow, and heat transfer in drilling engineering and enhanced oil recovery (hydraulic fracturing, CO2 injection, etc.) applications.

Download or read book IT Based Manufacturing written by Surender Kumar and published by Alpha Science Int'l Ltd.. This book was released on 2003 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides a logistic view of IT-Based manufacturing comprising the concept methodology, tools, techniques and applications. Papers written by experts in their fields are organized into different sections covering cutting processes and machine tools, non-traditional manufacturing, joining and forming, manufacturing mechatronics and intelligent manufacturing. Comprises of 129 papers presented by both Indian and International Scientists at the 20th All India Manufacturing Technology, Design and Research Conference. Machining Processes and Machine Tools Non-Traditional Manufacturing Forming and Joining Manufacturing Mechatronics Intelligent Manufacturing Related Topics

Download or read book Life Cycle Assessment of Energy Systems written by Guillermo San Miguel and published by MDPI. This book was released on 2021-04-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue on “LCA of Energy Systems” contains inspiring contributions on assessing the sustainability of novel technologies destined to shape the future of our energy sector. These include battery-based and plug-in hybrid electric vehicles, geothermal energy, hydropower, biomass gasification, national electricity systems, and waste incineration. The analysis of trends and singularities will be invaluable to product designers, engineers, and policy makers. Furthermore, these exercises also contribute to refining the life cycle framework and harmonizing methodological decisions. Our hope is that this should be a step toward promoting the use of science and knowledge to shape a better world for everyone.

Download or read book Lignocellulosic Biorefining Technologies written by Avinash P. Ingle and published by John Wiley & Sons. This book was released on 2020-04-13 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text to the advances and development of novel technologies in the production of high-value products from economically viable raw materials Lignocellulosic Biorefining Technologiesis an essential guide to the most recent advances and developments of novel technologies in the production of various high-value products from economically viable raw materials. Written by a team of experts on the topic, the book covers important topics specifically on production of economical and sustainable products such as various biofuels, organic acids, enzymes, biopigments, biosurfactants, etc. The book highlights the important aspects of lignocellulosic biorefining including structure, function, and chemical composition of the plant cell wall and reviews the details about the various components present in the lignocellulosic biomass and their characterizations. The authors explore the various approaches available for processing lignocellulosic biomass into second generation sugars and focus on the possibilities of utilization of lignocellulosic feedstocks for the production of biofuels and biochemicals. Each chapter includes a range of clear, informative tables and figures, and contains relevant references of published articles. This important text: Provides cutting-edge information on the recent developments in lignocellulose biorefinery Reviews production of various economically important and sustainable products, such as biofuels, organic acids, biopigments, and biosurfactants Highlights several broad-ranging areas of recent advances in the utilization of a variety of lignocellulosic feedstocks Provides a valuable, authoritative reference for anyone interested in the topic Written for post-graduate students and researchers in disciplines such as biotechnology, bioengineering, forestry, agriculture, and chemical industry, Lignocellulosic Biorefining Technologies is an authoritative and updated guide to the knowledge about various biorefining technologies.

Download or read book Renewable Energy Production and Distribution Volume 2 written by Mejdi Jeguirim and published by Elsevier. This book was released on 2023-04-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Energy Production and Distribution: Solutions and Opportunities, Volume Four, the latest release in the Advances in Renewable Energy Technologies series, looks at the production performance of renewable energy sources and emerging production processes. Containing all major renewable energy technologies in individual chapters, this reference includes some of the most dynamic developments, good practices and future concepts in solar energy systems, energy storage, geothermal energy, bioenergy and hydrogen production. By reviewing these advances, considering them in real world applications and analyzing key challenges, this book provides readers with an up-to-date resource on renewable energy grid integration and its importance. This newest volume will be of interest to sustainability, energy and engineering graduates, researchers, professors as well as industry professionals involved in the renewable energy sector. Highlights best practices and future ideas for a range of renewable energy technologies, including solar energy, energy storage and geothermal energy Discusses the latest challenges in emerging energy production processes Presents real-world applications to bridge the gap between energy research and practice

Download or read book Advances in Carbon Management Technologies written by Subhas Sikdar and published by CRC Press. This book was released on 2020-03-19 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Management Technologies comprises 43 chapters contributed by experts from all over the world. Volume 1 of the book, containing 23 chapters, discusses the status of technologies capable of yielding substantial reduction of carbon dioxide emissions from major combustion sources. Such technologies include renewable energy sources that can replace fossil fuels and technologies to capture CO2 after fossil fuel combustion or directly from the atmosphere, with subsequent permanent long-term storage. The introductory chapter emphasizes the gravity of the issues related to greenhouse gas emissionglobal temperature correlation, the state of the art of key technologies and the necessary emission reductions needed to meet international warming targets. Section 1 deals with global challenges associated with key fossil fuel mitigation technologies, including removing CO2 from the atmosphere, and emission measurements. Section 2 presents technological choices for coal, petroleum, and natural gas for the purpose of reducing carbon footprints associated with the utilization of such fuels. Section 3 deals with promising contributions of alternatives to fossil fuels, such as hydropower, nuclear, solar photovoltaics, and wind. Chapter 19 of this book is freely available as a downloadable Open Access PDF at http://www.taylorfrancis.com under a Creative Commons Attribution-Non Commercial-No Derivatives (CC-BY-NC-ND) 4.0 license.