Download or read book Levitation Micro Systems written by Kirill Poletkin and published by Springer Nature. This book was released on 2020-11-19 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents inductive and hybrid levitation micro-systems and their applications in micro-sensors and –actuators. It proposes and discusses analytical and quasi-finite element techniques for modeling levitation micro-systems based on the Lagrangian formalism. In particular, micro-bearings, -actuators, -accelerators and –accelerometers based on inductive levitation are comprehensively described with accompanying experimental measurements.
Download or read book Springer Handbook of Semiconductor Devices written by Massimo Rudan and published by Springer Nature. This book was released on 2022-11-10 with total page 1680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook comprehensively covers the topic of semiconductor devices, embracing all aspects from theoretical background to fabrication, modeling, and applications. Nearly 100 leading scientists from industry and academia were selected to write the handbook's chapters, which were conceived for professionals and practitioners, material scientists, physicists and electrical engineers working at universities, industrial R&D, and manufacturers. Starting from the description of the relevant technological aspects and fabrication steps, the handbook proceeds with a section fully devoted to the main conventional semiconductor devices like, e.g., bipolar transistors and MOS capacitors and transistors, used in the production of the standard integrated circuits, and the corresponding physical models. In the subsequent chapters, the scaling issues of the semiconductor-device technology are addressed, followed by the description of novel concept-based semiconductor devices. The last section illustrates the numerical simulation methods ranging from the fabrication processes to the device performances. Each chapter is self-contained, and refers to related topics treated in other chapters when necessary, so that the reader interested in a specific subject can easily identify a personal reading path through the vast contents of the handbook.
Download or read book Design and Manufacturing of Active Microsystems written by Stephanus Büttgenbach and published by Springer Science & Business Media. This book was released on 2011-03-04 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design and manufacturing of microsystems as well as necessary key technologies developed within the Collaborative Research Center 516. The research efforts of this collaboration are focused on active micro systems which are based on the electromagnetic actuator principle. The travel of the investigated actuator systems is on the order of several millimeters. The total construction size of the actuator is on the range of several centimeters whereas essential structures being several micrometers. The methods and the production technologies that are investigated on the basis of various research models incorporate the fundamental process chains of microsystems.
Download or read book Micro and Nano Fabrication written by Hans H. Gatzen and published by Springer. This book was released on 2015-01-02 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: For Microelectromechanical Systems (MEMS) and Nanoelectromechanical Systems (NEMS) production, each product requires a unique process technology. This book provides a comprehensive insight into the tools necessary for fabricating MEMS/NEMS and the process technologies applied. Besides, it describes enabling technologies which are necessary for a successful production, i.e., wafer planarization and bonding, as well as contamination control.
Download or read book Micromanipulation written by Nicola Pio Belfiore and published by MDPI. This book was released on 2019-01-10 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Micromanipulation" that was published in Actuators
Download or read book Micro System Technologies 90 written by Herbert Reichl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: On September 10-13, 1990, the first international meeting on Microsystem Technologies takes place at the Berlin International Congress Center. Most of the traditional congresses deal with themes that become more and more specific, and only a small part of the scientific world is reflected. The Micro System Technologies is attempting to take the opposite direction: During the last two decades the development of microelectronics was characterized by a tremendous increase of complexity of integrated circuits. At the same time the fields of microoptics and micromechanics have been developed to an advanced state of the art by the application of thin film and semiconductor technologies. The trend of the future development is to increase the integration density by combining the microelectronic, microoptic, and micro mechanic aspects to new complex multifunctional systems, which are able to comprise sensors, actuators, analogue and digital circuits on the same chip or on multichip-modules. Microsystems will lead to extensions of the field of microelectronic applications with important technical alterations and can open new considerable markets. For the realization of economical solutions for microsystems a lot of interdisciplinary cooperation and know-how has to be developed. New materials for sensitive layers, substrates, conducting, semiconducting, or isolating thin films are the basis for the development of new technologies. The increasing complexity leads to increasing interaction among electrical and non-electrical quantities.
Download or read book Magnetic Materials and Magnetic Levitation written by Dipti Ranjan Sahu and published by BoD – Books on Demand. This book was released on 2021-03-24 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic materials are important materials for high-tech areas and technological development, which are being classified not only based on their origin but also by the nature of processing, properties, functions, and applications. This book presents an overview of the different types of new magnetic materials and hybrid structures that exhibit different magnetic phenomena and interesting properties. The reported materials are studied theoretically and experimentally, which are the building blocks of all technological innovations. Topics such as magnetic levitation are given for industrial applications. The chapters of the book provide a key description of magnetic materials. This book is suitable for undergraduate and graduate students and professionals including engineers, scientists, researchers, technicians, and technology managers. This book gives an idea to readers for scientific innovation in this field.
Download or read book Magnetic Sensors and Devices written by Laurent A. Francis and published by CRC Press. This book was released on 2017-10-18 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in-depth coverage of magnetic sensors in industrial applications. It is divided into three sections: devices and technology for magnetic sensing, industrial applications (automotive, navigation), and emerging applications. Topics include transmission speed sensor ICs, dynamic differential Hall ICs, chopped Hall switches, programmable linear output Hall sensors, low power Hall ICs, self-calibrating differential Hall ICs for wheel speed sensing, dynamic differential Hall ICs, uni- and bipolar Hall IC switches, chopped mono cell Hall ICs, and electromagnetic levitation.
Download or read book Advances in Information Technology Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 3360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Information Technology Research and Application / 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Information Technology. The editors have built Advances in Information Technology Research and Application / 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Information Technology in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Information Technology Research and Application / 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Proceedings of the Fifth Symposium on Automated Integrated Circuits Manufacturing written by Vaughn E. Akins and published by . This book was released on 1990 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Symposium on Automated Integrated Circuits Manufacturing written by and published by . This book was released on 1990 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Implementation and Control of a Magnetic Levitation Device written by Ehsan Shameli and published by . This book was released on 2008 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic levitation technology has shown a great deal of promise for micromanipulation tasks. Due to the lack of mechanical contact, magnetic levitation systems are free of problems caused by friction, wear, sealing and lubrication. These advantages have made magnetic levitation systems a great candidate for clean room applications. In this thesis, a new large gap magnetic levitation system is designed, developed and successfully tested. The system is capable of levitating a 6.5(gr) permanent magnet in 3D space with an air gap of approximately 50(cm) with the traveling range of 20x20x30 cubic millimeters. The overall positioning accuracy of the system is 60 micro meters. With the aid of finite elements method, an optimal geometry for the magnetic stator is proposed. Also, an energy optimization approach is utilized in the design of the electromagnets.
Download or read book Identification of Physical Systems written by Rajamani Doraiswami and published by John Wiley & Sons. This book was released on 2014-07-29 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identification of a physical system deals with the problem of identifying its mathematical model using the measured input and output data. As the physical system is generally complex, nonlinear, and its input–output data is corrupted noise, there are fundamental theoretical and practical issues that need to be considered. Identification of Physical Systems addresses this need, presenting a systematic, unified approach to the problem of physical system identification and its practical applications. Starting with a least-squares method, the authors develop various schemes to address the issues of accuracy, variation in the operating regimes, closed loop, and interconnected subsystems. Also presented is a non-parametric signal or data-based scheme to identify a means to provide a quick macroscopic picture of the system to complement the precise microscopic picture given by the parametric model-based scheme. Finally, a sequential integration of totally different schemes, such as non-parametric, Kalman filter, and parametric model, is developed to meet the speed and accuracy requirement of mission-critical systems. Key features: Provides a clear understanding of theoretical and practical issues in identification and its applications, enabling the reader to grasp a clear understanding of the theory and apply it to practical problems Offers a self-contained guide by including the background necessary to understand this interdisciplinary subject Includes case studies for the application of identification on physical laboratory scale systems, as well as number of illustrative examples throughout the book Identification of Physical Systems is a comprehensive reference for researchers and practitioners working in this field and is also a useful source of information for graduate students in electrical, computer, biomedical, chemical, and mechanical engineering.
Download or read book Microfabrication and Nanofabrication written by Kanak Kalita and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-06-17 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book unravels the intriguing interplay between macroscopic manufacturing processes and microscopic fabrication techniques. It dives into the sophisticated world of precision manufacturing, where high accuracy, controlled processes enable the production of complex components and products. It covers micro and nano fabrication, which revolutionizes conventional manufacturing by creating minuscule yet highly functional parts, some even smaller than the width of a human hair. This book explores various topics, from precise machining techniques to nanoimprint technology, reflecting the vast breadth and depth of this field. The aim is to provide readers with a comprehensive understanding of how these micro and macro scales intertwine, opening new frontiers in manufacturing. By showcasing the latest research findings and their practical applications, this book elucidates the enormous potential and implications of this burgeoning field. The contents are laid out in a user-friendly manner to communicate complex ideas in an accessible, engaging way, making it a valuable resource for anyone curious about the next big leap in manufacturing technology.
Download or read book Manipulating Microscopic Objects A Study on Optical Tweezers and Acoustic Levitation written by Marius Martin and published by GRIN Verlag. This book was released on 2023-03-30 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bachelor Thesis from the year 2023 in the subject Physics - Applied physics, University of Aberdeen, language: English, abstract: This thesis investigates two powerful techniques for manipulating and studying microscopic particles: optical tweezers and acoustic levitation. Optical tweezers use the force of light to trap and manipulate small particles, while acoustic levitation uses sound waves to levitate particles in mid-air. The first part of the thesis focuses on the construction and optimization of an optical tweezers system. The system is build using high-powered laser, optics for focusing the laser beam, and a position detection and control system. the second part of this thesis explores the use of acoustic levitation for the manipulation of micro spheres. The acoustic levitation system is designed and constructed using 72 transducers. The system is characterized using measurements of the acoustic field and the resulting levitation forces. The levitation of micro spheres is demonstrated. This thesis would provide a detailed investigation of two powerful techniques for the manipulation of microscopic particles.
Download or read book Human Friendly Mechatronics written by Masaharu Takano and published by Elsevier. This book was released on 2001-04-11 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes 61 selected papers from 106 presented at the second International Conference on Machine Automation (ICMA2000). The conference focused, for the first time, on human friendly mechantronics which covers machine systems interacting with human beings, psychological, physiological, and physical behaviors of the human being itself, robotics, human-mimetic mechanical systems, commercial application examples and so on. Machine automation has owed a lot to mechatronics technology in the last decades, however, a paradigm shift is desired and emphasized in the 21st century in every aspect of our society, and mechantronics is not an exception. The paradigm shift in mechatronics is a pursuit of productivity and efficiency to the preference of humans, and it is time that a new concept of a human friendly robot must be proposed that is welcome by human users. The book aims to offer the most up-to-date and valuable information on: •Human Interface & Communication •Human Support Technology •Actuator & Control •Vision & Sensing •Robotics and Design •Manufacturing System We believe this book will bring advanced knowledge and valuable information to the industries as well as to academics and will contribute to the further development in mechatronics and its related fields.
Download or read book Surface Tension in Microsystems written by Pierre Lambert and published by Springer Science & Business Media. This book was released on 2013-08-31 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how surface tension effects can be used by engineers to provide mechanical functions in miniaturized products (1 mm). Even if precursors of this field such as Jurin or Laplace already date back to the 18th century, describing surface tension effects from a mechanical perspective is very recent.brThe originality of this book is to consider the effects of capillary bridges on solids, including forces and torques exerted both statically and dynamically by the liquid along the 6 degrees-of-freedom.brIt provides a comprehensive approach to various applications, such as capillary adhesion (axial force), centering force in packaging and micro-assembly (lateral force) and recent developments such as a capillary motor (torque).
