Download or read book Convertisseurs de L lectronique de Puissance written by Guy Séguier and published by McGraw-Hill Companies. This book was released on 1986 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Electronic Converters written by Eric Monmasson and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A voltage converter changes the voltage of an electrical power source and is usually combined with other components to create a power supply. This title is devoted to the control of static converters, which deals with pulse-width modulation (PWM) techniques, and also discusses methods for current control. Various application cases are treated. The book is ideal for professionals in power engineering, power electronics, and electric drives industries, as well as practicing engineers, university professors, postdoctoral fellows, and graduate students.
Download or read book Power Electronic Converters written by Robert Bausiere and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third in a series of four devoted to POWER ELECTRONIC CONVERTERS: The first of these concerns AC to DC conversion. The second concerns AC to AC conversion. This volume examines DC to DC conversion. The fourth is devoted to DC to AC conversion. Converters which carry out the DC-DC conversion operate by chopping the input voltage or current: they are called choppers or switch-mode power converters. Their operating frequency is not imposed by either the input or the output, both of which are at zero frequency. A frequency which is much greater than that of the industrial network can be chosen, provided that suitable configurations and semiconductor devices are used. This is the first difference compared to the rectifiers and AC-AC converters, analyzed in the previous volumes and which often operate at the industrial network frequency. The second difference concerns the commutation mode. Choppers operate in forced commutation. The beginning of an operating phase does not auto matically turn off the semiconductor devices which were conducting during the previous phase and which have to be brought to the blocking state. This turn-off must be carried out autonomously. These two differences - the higher frequency of commutations and, espe cially, the different mode of commutation -justify the first two chapters in this work: - Chapter 1 examines general notions concerning converters, supplies and loads, and more especially, how they can be characterized with regard to commutations.
Download or read book Rotating Electrical Machines written by René Le Doeuff and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book a general matrix-based approach to modeling electrical machines is promulgated. The model uses instantaneous quantities for key variables and enables the user to easily take into account associations between rotating machines and static converters (such as in variable speed drives). General equations of electromechanical energy conversion are established early in the treatment of the topic and then applied to synchronous, induction and DC machines. The primary characteristics of these machines are established for steady state behavior as well as for variable speed scenarios. Important new applications for this technology (such as wind turbines, electric propulsion systems for large ships, etc.) are addressed and the book is illustrated with a large number of informative and detailed photographs, provided by various companies at the leading edge of research and applications in the field.
Download or read book Power Electronics Applied to Industrial Systems and Transports Volume 3 written by Nicolas Patin and published by Elsevier. This book was released on 2015-05-07 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some power electronic converters are specifically designed to power equipment under a smoothed DC voltage. Therefore, the filtering part necessarily involves the use of auxiliary passive components (inductors and capacitors). This book deals with technical aspects such as classical separation between isolated and non-isolated power supplies, and soft switching through a special converter. It addresses the problem of regulating the output voltage of the switching power supplies in terms of modeling and obtaining transfer of SMPS functions.Power Electronics for Industry and Transport, Volume 3, offers a case study of an isolated flyback power which the complete design is presented: the active and passive components are sized based on the specifications initially set. Particular attention is given to the converter output capacitors and all the surrounding organs. - Introducing Essential notions in power electronics from both the theoretical and technological perspectives - Detailed chapters with a focus on switch-mode power supplies, another key area in which power electronics is used is in the supply of energy to a variety of electronic equipment for signal and information processing - Presented from a user's perspective to enable you to apply the theory of power electronics to practical applications
Download or read book Power Electronics Applied to Industrial Systems and Transports Volume 2 written by Nicolas Patin and published by Elsevier. This book was released on 2015-05-11 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of power electronic converters (DC / DC, DC / AC, AC / DC and AC / AC) conventionally used in industrial and transportation applications, specifically for the supply of electric machines with variable speed drop off window. From the perspective of design and sizing, this book presents the different functions encountered in a modular way for power electronics.Power Converters and Their Control details less traditional topics such as matrix converters and multilevel converters. This book also features a case study design of an industrial controller, which is a synthesis (except the AC / AC direct conversion) of the study subjects, including sizing associated passive components. - Introducing essential notions in power electronics from both theoretical and technological perspectives - Detailed chapters focusing on power supplies for electrical machinery, including a case study of full dimensioning of an industrial variable-speed drive - Presented from a user's perspective to enable you to apply the theory of power electronics to practical applications
Download or read book Control of Synchronous Motors written by Jean-Paul Louis and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchronous motors are indubitably the most effective device to drive industrial production systems and robots with precision and rapidity. Their control law is thus critical for combining at the same time high productivity to reduced energy consummation. As far as possible, the control algorithms must exploit the properties of these actuators. Therefore, this work draws on well adapted models resulting from the Park’s transformation, for both the most traditional machines with sinusoidal field distribution and for machines with non-sinusoidal field distribution which are more and more used in industry. Both, conventional control strategies like vector control (either in the synchronous reference frame or in the rotor frame) and advanced control theories like direct control and predictive control are thoroughly presented. In this context, a significant place is reserved to sensorless control which is an important and critical issue in tomorrow’s motors.
Download or read book Production d nergie lectrique partir des sources renouvelables Coll Sciences et technologies de l nergie lectrique written by ROBYNS Benoît and published by Lavoisier. This book was released on 2012-05-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les questions de développement durable et de projection des besoins futurs favorisent l'apparition de nouvelles technologies de production d'énergie et entraînent un changement de comportement des usagers. Ce livre contribue à une meilleure appréhension de ces technologies émergentes de production d'électricité. Il analyse leurs enjeux, leurs sources et leurs moyens de conversion électrique. Suivant une approche didactique et générale, cet ouvrage présente : - les systèmes de production d'électricité à partir de ressources énergétiques renouvelables des petites aux moyennes puissances (jusque 100 à 200 MW), - les notions électrotechniques de base nécessaire à la compréhension des caractéristiques de fonctionnement de ces convertisseurs, - les contraintes et problèmes d'intégration dans les réseaux électriques de ces moyens de production.
Download or read book Automotive Electricity written by Joseph Beretta and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of the century, electrical engineering technologies and applications have pervaded daily life and are present in the majority of everyday products, tools, and appliances. Increasingly these applications are becoming more prevalent in the automotive vehicle and products market. While change in this field has been relatively slow over the last ten last years, the pace of change is now beginning to accelerate and we are witnessing a wave driven by regulatory constraints and market laws which are sweeping away the last bastions of resistance. This book discusses both the historical and scientific issues surrounding the application of electrical technology in the automotive drives field, as well as potential future developments, such as hybrid vehicles and fuel cells. In the current context of energy conservation, pollution prevention, and carbon control, this book will provide an important and timely examination of a potentially enormous new market.
Download or read book Power Electronic Converters written by Guy Séguier and published by Springer. This book was released on 1993 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Non conventional Synchronous Motors written by Jean-Paul Louis and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical synchronous motors are the most effective device to drive industrial production systems and robots with precision and rapidity. However, numerous applications require efficient controls in non-conventional situations. Firstly, this is the case with synchronous motors supplied by thyristor line-commutated inverters, or with synchronous motors with faults on one or several phases. Secondly, many drive systems use non-conventional motors such as polyphase (more than three phases) synchronous motors, synchronous motors with double excitation, permanent magnet linear synchronous motors, synchronous and switched reluctance motors, stepping motors and piezoelectric motors. This book presents efficient controls to improve the use of these non-conventional motors. Contents 1. Self-controlled Synchronous Motor: Principles of Function and Simplified Control Model, Francis Labrique and François Baudart. 2. Self-controlled Synchronous Motor: Dynamic Model Including the Behavior of Damper Windings and Commutation Overlap, Ernest Matagne. 3. Synchronous Machines in Degraded Mode, Damien Flieller, Ngac Ky Nguyen, Hervé Schwab and Guy Sturtzer. 4. Control of the Double-star Synchronous Machine Supplied by PWM Inverters, Mohamed Fouad Benkhoris. 5. Vectorial Modeling and Control of Multiphase Machines with Non-salient Poles Supplied by an Inverter, Xavier Kestelyn and Éric Semail. 6. Hybrid Excitation Synchronous Machines, Nicolas Patin and Lionel Vido. 7. Advanced Control of the Linear Synchronous Motor, Ghislain Remy and Pierre-Jean Barre. 8. Variable Reluctance Machines: Modeling and Control, Mickael Hilairet, Thierry Lubin and Abdelmounaïm Tounzi. 9. Control of the Stepping Motor, Bruno Robert and Moez Feki . 10. Control of Piezoelectric Actuators, Frédéric Giraud and Betty Lemaire-Semail.
Download or read book Conception syst mique pour la conversion d nergie lectrique 2 approche int gr e par optimisation written by ROBOAM Xavier and published by Lavoisier. This book was released on 2012-11-06 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Le contexte économique impose des systèmes toujours plus performants, minimisant coûts d’investissement et de possession. Si les méthodes d’analyse, de synthèse et de gestion présentées dans le premier volume Conception systémique pour la conversion d’énergie électrique 1 participent à l’optimisation des systèmes énergétiques, les techniques traitées dans cet ouvrage proposent d’aller encore plus loin dans la performance. La complexité de systèmes multidisciplinaires à fort degré de couplage augmentant, le processus de conception par optimisation consistant à coupler un modèle à un algorithme d’optimisation au sein d’un environnement logiciel devient dès lors indispensable. Ce volume rassemble les points-clés permettant de représenter efficacement et de façon compacte l’environnement système et les profils de mission, mais également les méthodes, modèles et outils dédiés à l’optimisation. Les approches multiniveaux de conception et l’optimisation technico-économique des réseaux électriques sont particulièrement détaillées.
Download or read book Computer Animation and Simulation 95 written by Demetri Terzopoulos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains research papers that were presented at the Sixth Eurographics Workshop on Animation and Simulation which took place at Maastricht, The Nether lands, September 2-3, 1995. A core area within computer graphics, animation is concerned with the computer synthesis of dynamic scenes. The creation of realistic animation based on the simulation of physical and biological phenomena is a unify ing and rapidly evolving research theme. This series of workshops, an activity of the Eurographics Working Group on Animation and Simulation, is an international forum where researchers representing the animation and simulation communities convene to exchange knowledge and experience related to this theme and to physics-based mod elling, human modelling, motion control, visualization, etc. Of keen interest at this sixth workshop were novel animation techniques and animation systems that simulate the dynamics and interactions of physical objects-solid, fluid, and gaseous-as well as the behaviors of living systems such as plants, lower animals, and humans. The workshop continued to promote the confluence of animation and simulation as a leading edge of computer graphics research that is providing animators with sophisticated new algorithms for synthesizing dynamic scenes. The call for extended abstracts for the workshop, issued in February 1995, elicited an enthusiastic response.
Download or read book Power Electronic Converters written by Christian Rombaut and published by McGraw-Hill Companies. This book was released on 1987 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Intelligence and Renewables Towards an Energy Transition written by Mustapha Hatti and published by Springer Nature. This book was released on 2020-12-17 with total page 997 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book emphasizes adopting artificial intelligence-based and sustainable energy efficiency integrated with clear objectives, to involve researchers, students, and specialists in their development and implementation adequately in achieving objectives. The integration of artificial intelligence into renewable energetic systems would allow the rapid development of a knowledge-based economy suitable to the energy transition, while fully integrating the renewables into the global economy. This is how artificial intelligence has hand in by conceptualizing this transition and above all by saving time. The knowledge economy is valuated within the smart cities, which are fast becoming the favorite places where the energy transition will take place efficiently and intelligently by implementing integrated approaches to energy saving and energy supply and integrated urban approaches that go beyond individual interventions in buildings or transport modes using information and communication technologies.
Download or read book Proceedings of the 1995 IEEE IECON Plenary session Invited sessions and Power electronics written by and published by . This book was released on 1995 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
