Download or read book Lectures on Systems Control and Information written by Lei Guo and published by American Mathematical Soc.. This book was released on 2000 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents lectures delivered at a workshop held at the Chinese Academy of Sciences (Bejing). The following articles are included: "Nonlinear Systems Control" by R. Brockett, "Adaptive Control of Discrete-Time Nonlinear Systems with Structural Uncertainties" by L.-L. Xie and L. Guo, "Networks and Learning" by P. R. Kumar, "Mathematical Aspects of the Power Control Problem in Mobile Communication Systems" by C. W. Sung and W. S. Wong, and "Brockett's Problem on Nonlinear Filtering Theory" by S. S.-T. Yau. Basic concepts and current research are both presented in this book. The volume offers a comprehensive and easy-to-follow account of many fundamental issues in this diverse field. It would be a suitable text for a graduate course on wireless communication. Titles in this series are co-published with International Press, Cambridge, MA.

Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.

Download or read book Lectures on Network Systems written by Francesco Bullo and published by Createspace Independent Publishing Platform. This book was released on 2018-03-10 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: These lecture notes provide a mathematical introduction to multi-agent dynamical systems, including their analysis via algebraic graph theory and their application to engineering design problems. The focus is on fundamental dynamical phenomena over interconnected network systems, including consensus and disagreement in averaging systems, stable equilibria in compartmental flow networks, and synchronization in coupled oscillators and networked control systems. The theoretical results are complemented by numerous examples arising from the analysis of physical and natural systems and from the design of network estimation, control, and optimization systems.

Download or read book Advanced Topics in Control Systems Theory written by Antonio Loría and published by Springer Science & Business Media. This book was released on 2006-02-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected contributions by lecturers at the third annual Formation d’Automatique de Paris. It provides a well-integrated synthesis of the latest thinking in nonlinear optimal control, observer design, stability analysis and structural properties of linear systems, without the need for an exhaustive literature review. The internationally known contributors to this volume represent many of the most reputable control centers in Europe.

Download or read book Reshaping Accounting and Management Control Systems written by Katia Corsi and published by Springer. This book was released on 2017-03-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the relationship between digital innovations on the one hand, and accounting and management information systems on the other. In particular it addresses topics including cloud computing, data mining, XBRL, and digital platforms. It presents an analysis of how new technologies can reshape accounting and management information systems, enhancing their information potentialities and their ability to support decision-making processes, as well as several studies that reveal how managerial information needs can affect and reshape the adoption of digital technologies. Focusing on the four major aspects data management, information system architecture, external and internal reporting, the book offers a valuable resource for CIOs, CFOs and more generally for business managers, as well as for researchers and scholars. It is mainly based on a selection of the best papers - original double blind reviewed contributions - presented at the 2015 Annual Conference of the Italian Chapter of the Association for Information Systems (AIS).

Download or read book The Koopman Operator in Systems and Control written by Alexandre Mauroy and published by Springer Nature. This book was released on 2020-02-22 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad overview of state-of-the-art research at the intersection of the Koopman operator theory and control theory. It also reviews novel theoretical results obtained and efficient numerical methods developed within the framework of Koopman operator theory. The contributions discuss the latest findings and techniques in several areas of control theory, including model predictive control, optimal control, observer design, systems identification and structural analysis of controlled systems, addressing both theoretical and numerical aspects and presenting open research directions, as well as detailed numerical schemes and data-driven methods. Each contribution addresses a specific problem. After a brief introduction of the Koopman operator framework, including basic notions and definitions, the book explores numerical methods, such as the dynamic mode decomposition (DMD) algorithm and Arnoldi-based methods, which are used to represent the operator in a finite-dimensional basis and to compute its spectral properties from data. The main body of the book is divided into three parts: theoretical results and numerical techniques for observer design, synthesis analysis, stability analysis, parameter estimation, and identification; data-driven techniques based on DMD, which extract the spectral properties of the Koopman operator from data for the structural analysis of controlled systems; and Koopman operator techniques with specific applications in systems and control, which range from heat transfer analysis to robot control. A useful reference resource on the Koopman operator theory for control theorists and practitioners, the book is also of interest to graduate students, researchers, and engineers looking for an introduction to a novel and comprehensive approach to systems and control, from pure theory to data-driven methods.

Download or read book Advanced Topics in Control Systems Theory written by Françoise Lamnabhi-Lagarrigue and published by Springer Science & Business Media. This book was released on 2005-02-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Topics in Control Systems Theory contains selected contributions written by lecturers at the second (annual) Formation d’Automatique de Paris (FAP) (Graduate Control School in Paris). It is addressed to graduate students and researchers in control theory with topics touching on a variety of areas of interest to the control community such as cascaded systems, flatness, optimal control, and Hamiltonian and infinite-dimensional systems. The reader is provided with a well-integrated synthesis of the latest thinking in these subjects without the need for an exhaustive literature review. The internationally known contributors to this volume represent many of the most reputable control centers in Europe. Advanced Topics in Control Systems Theory can be used to support either a one-term general advanced course on nonlinear control theory, devoting a few lectures to each chapter, or for more focused and intensive courses at graduate level. The book’s concise but pedagogical manner will give an ideal start to researchers wishing to broaden their knowledge in aspects of modern control theory outside their own expertise.

Download or read book Singular Control Systems written by Liyi Dai and published by Springer. This book was released on 2014-03-12 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is sums up the development of singular system theory and provides the control circle with a systematic theory of the system. It focuses on the analysis and synthesis of singular control systems. Its distinctive features include systematic discussion of controllabilities and observabilities, design of singular or normal observers and compensators with their structural stability, systems analysis via transfer matrix, and studies of discrete-time singular systems. Some acquaintance with linear algebra and linear systems is assumed. Prospective readers are graduate students, scientists, and other researchers in control theory and its applications. Much of the material in the book is new.

Download or read book H infinity Control for Nonlinear Descriptor Systems written by He-Sheng Wang and published by Springer Science & Business Media. This book was released on 2006-01-18 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors present a study of the H-infinity control problem and related topics for descriptor systems, described by a set of nonlinear differential-algebraic equations. They derive necessary and sufficient conditions for the existence of a controller solving the standard nonlinear H-infinity control problem considering both state and output feedback. One such condition for the output feedback control problem to be solvable is obtained in terms of Hamilton–Jacobi inequalities and a weak coupling condition; a parameterization of output feedback controllers solving the problem is also provided. All of these results are then specialized to the linear case. The derivation of state-space formulae for all controllers solving the standard H-infinity control problem for descriptor systems is proposed. Among other important topics covered are balanced realization, reduced-order controller design and mixed H2/H-infinity control. "H-infinity Control for Nonlinear Descriptor Systems" provides a comprehensive introduction and easy access to advanced topics.

Download or read book Active Fault Tolerant Control Systems written by Mufeed Mahmoud and published by Springer Science & Business Media. This book was released on 2003-02-13 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technological systems rely on sophisticated control functions to meet increased performance requirements. For such systems, Fault Tolerant Control Systems (FTCS) need to be developed. Active FTCS are dependent on a Fault Detection and Identification (FDI) process to monitor system performance and to detect and isolate faults in the systems. The main objective of this book is to study and to validate some important issues in real-time Active FTCS by means of theoretical analysis and simulation. Several models are presented to achieve this objective, taking into consideration practical aspects of the system to be controlled, performance deterioration in FDI algorithms, and limitations in reconfigurable control laws.

Download or read book Piecewise Linear Control Systems written by Mikael K.-J. Johansson and published by Springer. This book was released on 2003-07-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2. Piecewise Linear Modeling . . . . . . . . . . . . . . . . . . . . . 9 2. 1 Model Representation . . . . . . . . . . . . . . . . . . . . . 9 2. 2 Solution Concepts . . . . . . . . . . . . . . . . . . . . . . . 2. 3 Uncertainty Models . . . . . . . . . . . . . . . . . . . . . . 2. 4 Modularity and Interconnections . . . . . . . . . . . . . . 26 2. 5 Piecewise Linear Function Representations . . . . . . . . . 28 2. 6 Comments and References . . . . . . . . . . . . . . . . . . 30 3. Structural Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3. 1 Equilibrium Points and the Steady State Characteristic . . 32 3. 2 Constraint Verification and Invariance . . . . . . . . . . . 35 3. 3 Detecting Attractive Sliding Modes on Cell Boundaries 37 3. 4 Comments and References . . . . . . . . . . . . . . . . . . 39 4. Lyapunov Stability . . . . . . . . . . . . . . . . . . . . . . . . . . 41 4. 1 Exponential Stability . . . . . . . . . . . . . . . . . . . . . . 41 4. 2 Quadratic Stability . . . . . . . . . . . . . . . . . . . . . . . 42 4. 3 Conservatism of Quadratic Stability . . . . . . . . . . . . . 46 4. 4 From Quadratic to Piecewise Quadratic . . . . . . . . . . . 48 4. 5 Interlude: Describing Partition Properties . . . . . . . . . 51 4. 6 Piecewise Quadratic Lyapunov Functions . . . . . . . . . 55 4. 7 Analysis of Piecewise Linear Differential Inclusions . . . . 61 4. 8 Analysis of Systems with Attractive Sliding Modes . . . . 63 4. 9 Improving Computational Efficiency . . . . . . . . . . . . 66 4. 10 Piecewise Linear Lyapunov Functions . . . . . . . . . . . 72 4. 11 A Unifying View . . . . . . . . . . . . . . . . . . . . . . . . 77 4. 12 Comments and References . . . . . . . . . . . . . . . . . . 82 5. Dissipativity Analysis . . . . . . . . . . . . . . . . . . . . . . . . 85 5. 1 Dissipativity Analysis via Convex Optimization . . . . . . 86 21 14 Contents Contents 5. 2 Computation of £2 induced Gain . . . . . . . . . . . . . . 88 5. 3 Estimation of Transient Energy . . . . . . . . . . . . . . . . 89 5. 4 Dissipative Systems with Quadratic Supply Rates . . . . . 91 5. 5 Comments and References . . . . . . . . . . . . . . . . . . 95 Controller Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 6. 1 Quadratic Stabilization of Piecewise Linear" Systems . . . 97 6. 2 Controller Synthesis based on Piecewise Quadratics . . . 98 6. 3 Comments and References . . . . . . . . . . . . . . . . . . 105 7. Selected Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 7. 1 Estimation of Regions of Attraction . . . . . . . . . . . . .

Download or read book Data Driven Science and Engineering written by Steven L. Brunton and published by Cambridge University Press. This book was released on 2022-05-05 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook covering data-science and machine learning methods for modelling and control in engineering and science, with Python and MATLAB®.

Download or read book Distributed Decision Making and Control written by Rolf Johansson and published by Springer. This book was released on 2011-11-10 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Decision Making and Control is a mathematical treatment of relevant problems in distributed control, decision and multiagent systems, The research reported was prompted by the recent rapid development in large-scale networked and embedded systems and communications. One of the main reasons for the growing complexity in such systems is the dynamics introduced by computation and communication delays. Reliability, predictability, and efficient utilization of processing power and network resources are central issues and the new theory and design methods presented here are needed to analyze and optimize the complex interactions that arise between controllers, plants and networks. The text also helps to meet requirements arising from industrial practice for a more systematic approach to the design of distributed control structures and corresponding information interfaces Theory for coordination of many different control units is closely related to economics and game theory network uses being dictated by congestion-based pricing of a given pathway. The text extends existing methods which represent pricing mechanisms as Lagrange multipliers to distributed optimization in a dynamic setting. In Distributed Decision Making and Control, the main theme is distributed decision making and control with contributions to a general theory and methodology for control of complex engineering systems in engineering, economics and logistics. This includes scalable methods and tools for modeling, analysis and control synthesis, as well as reliable implementations using networked embedded systems. Academic researchers and graduate students in control science, system theory, and mathematical economics and logistics will find mcu to interest them in this collection, first presented orally by the contributors during a sequence of workshops organized in Spring 2010 by the Lund Center for Control of Complex Engineering Systems, a Linnaeus Center at Lund University, Sweden.>

Download or read book Control of Discrete Event Systems written by Carla Seatzu and published by Springer. This book was released on 2012-07-27 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Discrete-event Systems provides a survey of the most important topics in the discrete-event systems theory with particular focus on finite-state automata, Petri nets and max-plus algebra. Coverage ranges from introductory material on the basic notions and definitions of discrete-event systems to more recent results. Special attention is given to results on supervisory control, state estimation and fault diagnosis of both centralized and distributed/decentralized systems developed in the framework of the Distributed Supervisory Control of Large Plants (DISC) project. Later parts of the text are devoted to the study of congested systems though fluidization, an over approximation allowing a much more efficient study of observation and control problems of timed Petri nets. Finally, the max-plus algebraic approach to the analysis and control of choice-free systems is also considered. Control of Discrete-event Systems provides an introduction to discrete-event systems for readers that are not familiar with this class of systems, but also provides an introduction to research problems and open issues of current interest to readers already familiar with them. Most of the material in this book has been presented during a Ph.D. school held in Cagliari, Italy, in June 2011.

Download or read book A Course in H infinity Control Theory written by Bruce A. Francis and published by Springer. This book was released on 1987 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Systems for Live Entertainment written by John Huntington and published by Taylor & Francis. This book was released on 2007 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The respected industry standard for technicians working in live entertainment.

Download or read book Feedback Control Theory written by John C. Doyle and published by Courier Corporation. This book was released on 2013-04-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent introduction to feedback control system design, this book offers a theoretical approach that captures the essential issues and can be applied to a wide range of practical problems. Its explorations of recent developments in the field emphasize the relationship of new procedures to classical control theory, with a focus on single input and output systems that keeps concepts accessible to students with limited backgrounds. The text is geared toward a single-semester senior course or a graduate-level class for students of electrical engineering. The opening chapters constitute a basic treatment of feedback design. Topics include a detailed formulation of the control design program, the fundamental issue of performance/stability robustness tradeoff, and the graphical design technique of loopshaping. Subsequent chapters extend the discussion of the loopshaping technique and connect it with notions of optimality. Concluding chapters examine controller design via optimization, offering a mathematical approach that is useful for multivariable systems.