Download or read book Lecture Notes on the Theory of Plates and Shells written by David J. Steigmann and published by Springer Nature. This book was released on 2023-02-20 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory of plates and shells on the basis of the three-dimensional parent theory. The authors explore the thinness of the structure to represent the mechanics of the actual thin three-dimensional body under consideration by a more tractable two-dimensional theory associated with an interior surface. In this way, the relatively complex three-dimensional continuum mechanics of the thin body is replaced by a far more tractable two-dimensional theory. To ensure that the resulting model is predictive, it is necessary to compensate for this ‘dimension reduction’ by assigning additional kinematical and dynamical descriptors to the surface whose deformations are modelled by the simpler two-dimensional theory. The authors avoid the various ad hoc assumptions made in the historical development of the subject, most notably the classical Kirchhoff–Love hypothesis requiring that material lines initially normal to the shell surface remain so after deformation. Instead, such conditions, when appropriate, are here derived rather than postulated.
Download or read book Theories of Plates and Shells written by Reinhold Kienzler and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and shell theories experienced a renaissance in recent years. The potentials of smart materials, the challenges of adaptive structures, the demands of thin-film technologies and more on the one hand and the availability of newly developed mathematical tools, the tremendous increase in computer facilities and the improvement of commercial software packages on the other caused a reanimation of the scientific interest. In the present book the contributions of the participants of the EUROMECH Colloquium 444 "Critical Review of the Theories of Plates and Shells and New Applications" have been collected. The aim was to discuss the common roots of different plate and shell approaches, to review the current state of the art, and to develop future lines of research. Contributions were written by scientists with civil and mechanical engineering as well as mathematical and physical background.
Download or read book Thin Plates and Shells written by Eduard Ventsel and published by CRC Press. This book was released on 2001-08-24 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering applications. It includes computer processes for finite difference, finite element, boundary element, and boundary collocation methods as well as other variational and numerical methods. It also contains end-of-chapter examples and problem/solution sets, a catalog of solutions for cylindrical and spherical shells, and tables of the most commonly used plates and shells.
Download or read book Theory of Plates and Shells written by Stephen Timoshenko and published by McGraw-Hill Publishing Company. This book was released on 1959 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lecture Notes on Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are heterogeneous by nature, and are intended to be, since only the combination of different constituent materials can give them the desired combination of low weight, stiffness and strength. At present, the knowledge has advanced to a level that materials can be tailored to exhibit certain, required properties. At the same time, the fact that these materials are composed of various, sometimes very different constituents, make their mechanical behaviour complex. This observation holds with respect to the deformation behaviour, but especially with respect to the failure behaviour, where complicated and unconventional failure modes have been observed. It is a challenge to develop predictive methods that can capture this complex mechanical behaviour, either using analytical tools, or using numerical me- ods, the ?nite element method being the most widespread among the latter. In this respect, developments have gone fast over the past decade. Indeed, we have seen a paradigm shift in computational approaches to (composite) ma- rial behaviour. Where only a decade ago it was still customary to carry out analyses of deformation and failure at a macroscopic level of observation only – one may call this a phenomenological approach – nowadays this approach is being progressively replaced by multiscale methods. In such methods it is r- ognized a priori that the overall behaviour is highly dependent on local details and ?aws.
Download or read book Plates and Shells written by Michel Fortin and published by American Mathematical Soc.. This book was released on 1999-06-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features the proceedings from the Summer Seminar of the Canadian Mathematical Society held at Universite Laval. The purpose of the seminar was to gather both mathematicians and engineers interested in the theory or application of plates and shells, or more generally, in the modelisation of thin structures. From this, it was hoped that a better understanding of the problem would emerge for both groups of professionals. New aspects from the mathematical point of view and new applications posing new challenges are reported. This volume offers a snapshot of the state of the art of this rapidly evolving topic.
Download or read book Theory and Analysis of Elastic Plates and Shells Second Edition written by J. N. Reddy and published by CRC Press. This book was released on 1999-02-10 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents a complete treatment of the theory and analysis of elastic plates. It provides detailed coverage of classic and shear deformation plate theories and their solutions by analytical as well as numerical methods for bending, buckling and natural vibrations. Analytical solutions are based on the Navier and Levy solution method, and numerical solutions are based on the Rayleigh-Ritz methods and finite element method. The author address a range of topics, including basic equations of elasticity, virtual work and energy principles, cylindrical bending of plates, rectangular plates and an introduction to the finite element method with applications to plates.
Download or read book Theory and Design of Plate Shell Structures written by Maan H. Jawad and published by Springer. This book was released on 1994 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to integrate the theory, design, and stability analysis of plates and shells in one comprehensive volume. With authoritative accounts of diverse aspects of plates and shells, this volume facilitates the study and design of structures that incorporate both plate and shell components.
Download or read book Analysis of Shells and Plates written by Phillip L. Gould and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study ofthree-dimensional continua has been a traditional part of graduate education in solid mechanics for some time. With rational simplifications to the three-dimensional theory of elasticity, the engineering theories of medium-thin plates and of thin shells may be derived and applied to a large class of engi neering structures distinguished by a characteristically small dimension in one direction. Often, these theories are developed somewhat independently due to their distinctive geometrical and load-resistance characteristics. On the other hand, the two systems share a common basis and might be unified under the classification of Surface Structures after the German term Fliichentragwerke. This common basis is fully exploited in this book. A substantial portion of many traditional approaches to this subject has been devoted to constructing classical and approximate solutions to the governing equations of the system in order to proceed with applications. Within the context of analytical, as opposed to numerical, approaches, the limited general ity of many such solutions has been a formidable obstacle to applications involving complex geometry, material properties, and/or loading. It is now relatively routine to obtain computer-based solutions to quite complicated situations. However, the choice of the proper problem to solve through the selection of the mathematical model remains a human rather than a machine task and requires a basis in the theory of the subject.
Download or read book Theory and Analysis of Elastic Plates and Shells Second Edition written by J. N. Reddy and published by CRC Press. This book was released on 2006-11-20 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because plates and shells are common structural elements in aerospace, automotive, and civil engineering structures, engineers must understand the behavior of such structures through the study of theory and analysis. Compiling this information into a single volume, Theory and Analysis of Elastic Plates and Shells, Second Edition presents a complete, up-to-date, and unified treatment of classical and shear deformation plates and shells, from the basic derivation of theories to analytical and numerical solutions. Revised and updated, this second edition incorporates new information in most chapters, along with some rearrangement of topics to improve the clarity of the overall presentation. The book presents new material on the theory and analysis of shells, featuring an additional chapter devoted to the topic. The author also includes new sections that address Castigliano's theorems, axisymmetric buckling of circular plates, the relationships between the solutions of classical and shear deformation theories, and the nonlinear finite element analysis of plates. The book provides many illustrations of theories, formulations, and solution methods, resulting in an easy-to-understand presentation of the topics. Like the previous edition, this book remains a suitable textbook for a course on plates and shells in aerospace, civil, and mechanical engineering curricula and continues to serve as a reference for industrial and academic structural engineers and scientists.
Download or read book Lecture Notes on Theory and Analysis of Laminated Composite Plates and Shells written by Junuthula Narasimha Reddy and published by . This book was released on 1988 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Plates and Shells written by Christian Mittelstedt and published by Springer Nature. This book was released on 2023-06-18 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis of plates and shells and is divided into four sections. After briefly introducing the basics of elasticity theory and the energy methods of elastostatics in the first section, the second section is devoted to the statics of disk structures. In addition to isotropic disks in Cartesian and polar coordinates, approximation methods and anisotropic disks are also discussed. The following third section deals with plate structures, covering plates in Cartesian and polar coordinates, and also discussing approximation methods and higher-order plate theories. Other chapters in this section discuss plate buckling as well as geometric nonlinear analysis and laminated plates. The fourth and final section of this book is devoted to shells, i.e., curved thin structures, following the common division into membrane theory on the one hand and bending theory on the other hand. This book is intended for students at universities, but also for engineers in practice and researchers in engineering science.
Download or read book Stresses in Plates and Shells written by A. C. Ugural and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1999 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text provides comprehensive coverage of both plates and shells, and a unique blend of modern analytical and computer-oriented numerical methods in presenting stress analysis in a realistic setting. It is distinguished by its broad range of exceptional visual interpretations of the solutions, applications, and means by which loads are resisted in beams, plates, and shells. Combining the current-numerical, mechanics of materials, and theory of elasticity methods of analysis, Stresses in Plates and Shells, Second Edition, offers an in-depth and complete coverage of the subject for students and practicing engineers.
Download or read book Plate and Shell Structures written by Maria Radwańska and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and Shell Structures: Selected Analytical and Finite Element Solutions Maria Radwañska, Anna Stankiewicz, Adam Wosatko, Jerzy Pamin Cracow University of Technology, Poland Comprehensively covers the fundamental theory and analytical and numerical solutions for different types of plate and shell structures Plate and Shell Structures: Selected Analytical and Finite Element Solutions not only provides the theoretical formulation of fundamental problems of mechanics of plates and shells, but also several examples of analytical and numerical solutions for different types of shell structures. The book contains advanced aspects related to stability analysis and a brief description of modern finite element formulations for plates and shells, including the discussion of mixed/hybrid models and locking phenomena. Key features: 52 example problems solved and illustrated by more than 200 figures, including 30 plots of finite element simulation results. Contents based on many years of research and teaching the mechanics of plates and shells to students of civil engineering and professional engineers. Provides the basis of an intermediate-level course on computational mechanics of shell structures. The book is essential reading for engineering students, university teachers, practitioners and researchers interested in the mechanics of plates and shells, as well as developers testing new simulation software.
Download or read book Plates and Shells written by Ansel C. Ugural and published by CRC Press. This book was released on 2017-10-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noted for its practical, accessible approach to senior and graduate-level engineering mechanics, Plates and Shells: Theory and Analysis is a long-time bestselling text on the subjects of elasticity and stress analysis. Many new examples and applications are included to review and support key foundational concepts. Advanced methods are discussed and analyzed, accompanied by illustrations. Problems are carefully arranged from the basic to the more challenging level. Computer/numerical approaches (Finite Difference, Finite Element, MATLAB) are introduced, and MATLAB code for selected illustrative problems and a case study is included.
Download or read book Theory and Design of Plate and Shell Structures written by Maan Jawad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of many structures such as pressure vessels, aircrafts, bridge decks, dome roofs, and missiles is based on the theories of plates and shells. The degree of simplification needed to adopt the theories to the design of various structures depends on the type of structure and the re quired accuracy of the results. Hence, a water storage tank can be satis factorily designed using the membrane shell theory, which disregards all bending moments, whereas the design of a missile casing requires a more precise analysis in order to minimize weight and materials. Similarly, the design of a nozzle-to-cylinder junction in a nuclear reactor may require a sophisticated finite element analysis to prevent fatigue failure while the same junction in an air accumulator in a gas station is designed by simple equations that satisfy equilibrium conditions. Accordingly, this book is written for engineers interested in the theories of plates and shells and their proper application to various structures. The examples given throughout the book subsequent to derivation of various theories are intended to show the engineer the level of analysis required to achieve a safe design with a given degree of accuracy. The book covers three general areas. These are: bending of plates; membrane and bending theories of shells; and buckling of plates and shells. Bending of plates is discussed in five chapters. Chapters 1 and 2 cover rectangular plates with various boundary and loading conditions.
Download or read book Stability Analysis of Plates and Shells written by and published by . This book was released on 1998 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: