Download or read book Lecture Notes on Dynamo Design written by Horace Field Parshall and published by . This book was released on 1894 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Dynamos written by Silvanus P. Thompson and published by Forgotten Books. This book was released on 2015-06-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Design of Dynamos These notes on Dynamo Design are not intended to supersede the more complete handbooks on the special branch of electrical engineering of which this is only a part. In the forthcoming new (seventh) edition of the Author's Dynamo-Electric Machinery many other examples of design will be found. The present short work, intended primarily for the Author's own students, is purposely confined to continuous-current generators. As it will be used by engineers, chiefly in Great Britain, in her Colonies, and in the United States, the calculations and data have been expressed in inch measures. But the Author has adopted throughout the decimal subdivision of the inch; small lengths being given in mils, and small areas of cross-section in square mils, or, sometimes also, in circular mils, to suit American practice. In the section on Armature Winding Schemes special attention is given to series-parallel windings, and to the doctrine of the "equivalent ring." About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Notes on Design of Small Dynamo written by George Halliday and published by . This book was released on 1895 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamos written by and published by Elsevier. This book was released on 2011-07-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamos is a collection of lectures given in July 2007 at the Les Houches Summer School on "Dynamos". Provides a pedagogical introduction to topics in Dynamos Addresses each topic from the basis to the most recent developments Covers the lectures by internationally-renowned and leading experts
Download or read book Lecture Notes on Dynamo electric Machinery written by Henry Smith Carhart and published by . This book was released on 1892 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Dynamo written by Charles Caesar Hawkins and published by . This book was released on 1925 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Notes on Design of Small Dynamo written by George Halliday and published by . This book was released on 1892 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Dynamo eletric Machines and Practical Directions for Designing and Constructing Dynamos written by Carl Hering and published by . This book was released on 1888 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamos and Dynamo Design written by International Correspondence Schools and published by Forgotten Books. This book was released on 2015-06-26 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Dynamos and Dynamo Design: Direct Current Motors; Alternating Currents; Alternators; Alternating-Current Apparatus The International Library of Technology is the outgrowth of a large and increasing demand that has arisen for the Reference Libraries of the International Correspondence Schools on the part of those who are not students of the Schools. As the volumes composing this Library are all printed from the same plates used in printing the Reference Libraries above mentioned, a few words are necessary regarding the scope and purpose of the instruction imparted to the students of - and the class of students taught by - these Schools, in order to afford a clear understanding of their salient and unique features. The only requirement for admission to any of the courses offered by the International Correspondence Schools, is that the applicant shall be able to read the English language and to write it sufficiently well to make his written answers to the questions asked him intelligible. Each course is complete in itself, and no textbooks are required other than those prepared by the Schools for the particular course selected. The students themselves are from every class, trade, and profession and from every country; they are, almost without exception, busily engaged in some vocation, and can spare but little time for study, and that usually outside of their regular working hours. The information desired is such as can be immediately applied in practice, so that the student may be enabled to exchange his present vocation for a more congenial one, or to rise to a higher level in the one he now pursues. Furthermore, he wishes to obtain a good working knowledge of the subjects treated in the shortest time and in the most direct manner possible. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Dynamo Design written by Abraham Press and published by . This book was released on 1905 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Electrical Machinery written by William Thomas Ryan and published by . This book was released on 1912 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to General Thermodynamics written by Henry Augustus Perkins and published by . This book was released on 1912 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Machine Design written by Dexter Simpson Kimball and published by . This book was released on 1911 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Design written by Albert William Smith and published by . This book was released on 1909 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stretch Twist Fold The Fast Dynamo written by Stephen Childress and published by Springer Science & Business Media. This book was released on 1995-10-09 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of the magnetic fields of the Earth and Sun, as well as those of other planets, stars, and galaxies, has a long history and a rich and varied literature, including in recent years a number of review articles and books dedicated to the dynamo theories of these fields. Against this background of work, some explanation of the scope and purpose of the present monograph, and of the presentation and organization of the material, is therefore needed. Dynamo theory offers an explanation of natural magnetism as a phenomenon of magnetohydrodynamics (MHD), the dynamics governing the evolution and interaction of motions of an electrically conducting fluid and electromagnetic fields. A natural starting point for a dynamo theory assumes the fluid motion to be a given vector field, without regard for the origin of the forces which drive it. The resulting kinematic dynamo theory is, in the non-relativistic case, a linear advection-diffusion problem for the magnetic field. This kinematic theory, while far simpler than its magnetohydrodynamic counterpart, remains a formidable analytical problem since the interesting solutions lack the easiest symmetries. Much ofthe research has focused on the simplest acceptable flows and especially on cases where the smoothing effect of diffusion can be exploited. A close analog is the advection and diffusion of a scalar field by laminar flows, the diffusion being measured by an appropriate Peclet number. This work has succeeded in establishing dynamo action as an attractive candidate for astrophysical magnetism.
Download or read book A Treatise on Design and Construction of Roofs written by Nathan Clifford Ricker and published by . This book was released on 1912 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elementary Dynamo Design written by W. Benison Hird and published by . This book was released on 2015-07-02 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Elementary Dynamo Design: With Numerical Examples The aim of this volume is to explain, by means of numerical examples, the methods and calculations necessary for the design of dynamo-electric machinery. Controversial points as to the nicety of design are avoided as belonging to a more advanced study of the subject than is here intended, but the general effect of different modifications are noted as occasion arises. Whilst no endeavour has been made to treat of the theory of electricity and magnetism, introductory chapters deal with points that are most intimately connected with dynamo design in such a way as will, it is hoped, enable those who approach the subject from the practical side, and without any deep theoretical training, intelligently to follow the reasoning in the succeeding chapters. A system of mixed units is used throughout the book: the dimensions of all parts of the machines are given in inches, whilst all the magnetic calculations are worked out in centimeters. It is necessary that the finished results should be put into the shops in feet and inches, but all scientific works and original papers dealing with magnetism invariably base their calculations on the centimeter as the unit of length. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
