Download or read book Mat riaux composites 5e d written by BERTHELOT Jean-Marie and published by Lavoisier. This book was released on 2012-10-22 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Véritable ouvrage de référence, Matériaux composites apporte l’ensemble des concepts théoriques et pratiques nécessaires à la compréhension du comportement mécanique des matériaux et structures composites. Ainsi, il permet d’établir une synthèse de l’analyse du comportement mécanique et de la théorie des plaques stratifiées ou sandwiches, et d’en appliquer les développements à la résolution des problèmes de flexion, de flambement et de vibrations. Composé de cinq parties, ce traité repose sur une approche fondamentale et unifiée aboutissant à une continuité des concepts et des théories. Illustrée de nombreux exercices d’application des concepts introduits, cette cinquième édition entièrement en couleurs a été actualisée et des commentaires ont été ajoutés afin de mettre en évidence la progression du traité. Après une présentation de la constitution puis de la mise en œuvre des matériaux composites, l’ouvrage développe progressivement les outils nécessaires pour modéliser le comportement mécanique des structures en matériaux composites stratifiés et sandwiches. Il aborde ensuite les problèmes de dimensionnement des structures, montrant comment les outils introduits permettent de modéliser le comportement mécanique des structures en matériaux composites. Le contenu et la progression de Matériaux composites ont été conçus avec pour objectifs principaux : – traiter le matériau composite comme un matériau traditionnel ; – intégrer l’apport des techniques numériques dans la résolution des problèmes de dimensionnement des structures ; – aborder les difficultés de manière progressive afin de faciliter l’accès du lecteur aux divers concepts introduits ; – confronter la modélisation avec le comportement réel des matériaux et des structures. Complet et didactique, cet ouvrage s’adresse aux étudiants de 2e et 3e cycles, aux ingénieurs, aux chercheurs ainsi qu’aux techniciens supérieurs
Download or read book Geotechnics for Developing Africa written by G.E. Blight and published by CRC Press. This book was released on 2021-07-01 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings represent a valuable reference on geotechnical problems peculiar to Africa and for engineering solutions to local problems. Topics covered are: Foundation engineering and lateral support; Methods of design and analysis; Monitoring, laboratory and field testing; Municipal, industrial and mining waste and environmental geotechnics; Soil improvement; Transportation geotechnics; Case studies.The proceedings are also an invaluable source of data on the properties of African soils, the properties of residual and tropical soils, as well as climate related problems.
Download or read book Etude du comportement des corps en flexion au del de la limite lastique et application de la plasticit la r solution de syst mes de poutres fl chies en acier doux written by André Batifoulier and published by . This book was released on 1951 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ductility of Seismic Resistant Steel Structures written by Victor Gioncu and published by CRC Press. This book was released on 2003-09-02 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a state-of-the-art report on the ductility of steel structures, containing a comprehensive review of the technical literature available, and presenting the results of the authors' own extensive research activities in this area. Analytical and numerical methods are described, and a wealth of practical information is provided. Ductility of Seismic-Resistant Steel Structures will be of great use to advanced students, researchers, designers and professionals in the field of civil, structural and earthquake engineering.
Download or read book Partial Differential Equations and Functional Analysis written by J. Cea and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pierre Grisvard, one of the most distinguished French mathematicians, died on April 22, 1994. A Conference was held in November 1994 out of which grew the invited articles contained in this volume. All of the papers are related to functional analysis applied to partial differential equations, which was Grisvard's specialty. Indeed his knowledge of this area was extremely broad. He began his career as one of the very first students of Jacques Louis Lions, and in 1965, he presented his "State Thesis" on interpolation spaces, using in particular, spectral theory for linear operators in Banach spaces. After 1970, he became a specialist in the study of optimal regularity for par tial differential equations with boundary conditions. He studied singulari ties coming from coefficients, boundary conditions, and mainly non-smooth domains, and left a legacy of precise results which have been published in journals and books. Pierre Grisvard spent most of his career as a full professor at the University of Nice, where he started in 1967. For shorter or longer periods, he visited several foreign countries, and collaborated with some of the most famous mathematicians in his field. He was also an excellent organizer and directed a large number of Ph.D. students. Finally, this volume contains a bibliography of Grisvard's works as well as one paper which he wrote and which has not been published before.
Download or read book ANALYSE STATISTIQUE ET EXPERIMENTALE DES PROPRIETES MECANIQUES DE QUELQUES BOIS CAMEROUNAIS written by Joseph Albert Mukam Fotsing and published by Lulu.com. This book was released on 2012-09-27 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Une modélisation statistique du comportement mécanique du matériau bois selon trois types de sollicitations nous a conduit à la détermination des probabilités de ruptures correspondantes. Des essais sont ensuite menés en vue de mettre en évidence la validité des assertions précédentes en traction, compression et flexion.
Download or read book Vuln rabilit sismique des constructions written by GUEGEN Philippe and published by Lavoisier. This book was released on 2013-04-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ce ne sont pas les séismes qui tuent mais l’effondrement des constructions. C’est ainsi au génie parasismique, au travers de la réglementation, de concevoir des ouvrages résistants à l’aléa sismique dit réglementaire. Cependant, sachant que ces règles se sont améliorées en même temps que notre connaissance du phénomène naturel et des événements passés, force est de constater que la majorité des centres urbains est composée de bâtiments anciens, conçus selon des concepts et des règles de l’art souvent inadaptés au contexte sismique. Savoir évaluer la vulnérabilité des constructions existantes est donc une étape indispensable à une meilleure gestion du risque sismique et de sa politique de prévention. Après quelques rappels essentiels suivis d’exemples, cet ouvrage décrit des développements récents sur l’évaluation sismique de zones urbaines constituées d’un grand nombre de structures, dans des contextes à sismicité modérée (France, Suisse) ou forte (Italie, Grèce).
Download or read book Canadian Journal of Civil Engineering written by and published by . This book was released on 2007 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behavior of Anisotropic Solids Comportment M chanique des Solides Anisotropes written by J.P. Boehler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1978, the European Mechanics Committee and the French Centre National de la Recherche Scientifique agreed to the organization of an Interna tional Colloquium on the "Mechanical Behavior of Anisotropic Solids". The meeting was held at Villard-de-Lans (near Grenoble, France) from 19th to 22 nd June 1979. The Colloquium considered mechanical aspects of the anisotropy of solids, both initial and induced by permanent deformation, anisotropic hardening and damage, oriented fissuration, etc. Topics concerned mathematical, experimental and engineering aspects of the anisotropy of metals, composites, soils and rocks. The aim of the Colloquium was to bring together experimentalists, theoretecians and engineers interested in various features of mechanical anisotropy, in order to permit an interdisciplinary exchange of understanding, experience and methods. A detailed description of the scope, aim and proposed topics is contained in the Preface. The announcement of the Colloquium attracted a large number of sub mitted contributions. Conforming with the principles of Euromech Colloquia and of the Colloques Internationaux du CNRS, the accepted contributions were limited to 50 communications. A general description of the scientific program is to be found in the Preface. Five general lectures gave state-of-the-art reports concerning some areas of the behavior of anisotropic solids; the 50 communications were divided into 12 sessions dealing with specific topics (see "Contents"). In order to facilitate subsequent contact between the reader and the contributors, full addresses are given in the "List of Authors."
Download or read book Applied Mechanics written by M. Hetenyi and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the Twelfth International Congress of Applied Mechanics, held at Stanford University on August 26 to 31, 1968. The Congress was organized by the International Union of Theoretical and Applied Mechanics; members of the IUTAM Congress Committee and Bureau are listed under Congress Organization. The members of the Stanford Organizing Committee, which was responsible for the detailed organization of the Congress, are also given, as are the names of the sponsors and the industrial and educational organizations that contributed so generously to the financial support of the meeting. Those attending the Congress came from 32 countries and totaled 1337 persons, plus wives and children. A list of the registered participants is included in the volume. The technical sessions of the Congress comprised four General Lectures and 281 contributed papers, the latter being presented in groups of five simultaneous sessions. The final choice of the contributed papers was made on the basis of abstracts by an International Papers Commit tee of IUTAM consülting of G. K. BATCHELOR, E. BECKER, N. J. HOFF, and W. T. KOlTER.
Download or read book Pavement Cracking written by Imad L. Al-Qadi and published by CRC Press. This book was released on 2008-07-30 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internationally, much attention is given to causes, prevention, and rehabilitation of cracking in concrete, flexible, and composite pavements. The Sixth RILEMInternational Conference on Cracking in Pavements (Chicago, June 16-18, 2008) provided a forum for discussion of recent developments and research results.This book is a collection of papers fr
Download or read book Mechanical Tests for Bituminous Mixes Characterization Design and Quality Control written by E. Eustacchio and published by CRC Press. This book was released on 2004-06-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms the Proceedings of an International RILEM Symposium, the fourth in the series, on Testing of Bituminous Mixes in Budapest, Hungary, October 1990. The aim of the Symposium is to promote tests for the characterization, design and quality control of bituminous mixes which combine the best features of traditional and modern approaches. Among the topics covered are specimen preparation, tests with unique loading (Marshall test, uniaxial tension and creep tests etc), which are used for mix design or control of mechanical properties, and tests with repeated loading, which give information on fatigue, permanent deformation and moduli, especially for mix design.
Download or read book Metallurgy and Mechanics of Welding written by Regis Blondeau and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview on the subject of welding. Written by a group of expert contributors, the book covers all welding methods, from traditional to high-energy plasmas and lasers. The reference presents joint welding, stainless steel welding, aluminum welding, welding in the nuclear industry, and all aspects of welding quality control.
Download or read book Les alliages m moire de forme written by LEXCELLENT Christian and published by Lavoisier. This book was released on 2013-04-01 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les alliages à mémoire de forme sont des matériaux uniques qui ont la propriété de se souvenir des traitements thermomécaniques subis (traction, torsion, flexion, etc.). Ils sont très utilisés dans l'industrie biomédicale, l'aéronautique ou le nucléaire. Cet ouvrage traite de leur compréhension physique et mécanique, et de leur utilisation, en se concentrant principalement sur la nature de la transformation martensitique, expliquée à travers les théorèmes de Ball et James. Les modèles macroscopiques à variables internes donnent les clés pour le calcul des structures en alliage à mémoire de forme, particulièrement utile pour l’utilisation industrielle de ces matériaux. Professeur à l’Ecole nationale supérieure de mécanique et des microtechniques de Besançon, Christian Lexcellent mène des recherches depuis plus de 20 ans sur les alliages à mémoire de forme. Ses enseignements portent sur le comportement linéaire et non-linéaire des matériaux.
Download or read book Vers une nouvelle philosophie transcendantale written by T.F. Geraets and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Depuis la vigoureuse monographie que, en 1951, Alphonse de Waelhens consacra, sous le Ie titre de {laquo}Vne {laquo}Une philosophie philosophie de de l'Ambi l'Ambi guite{raquo} guite{raquo} a la pensee de Maurice Merleau-Ponty, la reflexion et les etudes sur les divers aspects de eette cette pensee pensee se se multiplierent multiplierent en en Franee France et dans le Ie monde. monde. La mort prematuree du philosophe en 1961, n'a pas diminue l'inMret l'interet qu'avaient suscite ses eerits ecrits et son enseignement. Des notes et des resumes de cours, des manuscrits manuserits inedits pieusement reunis par des disciples, diseiples, furent publies depuis lors. {laquo}Le Visible et l'Invisible, suivi de notes de travail{raquo}, paru en 1964, revela les perspeetives perspectives nouvelles d'une oeuvre qui apparaU ainsi eomme comme la plus riehe riche en possibilites, possibilit6s, parmi toutes eelles celles que, que, meme meme sur sur sa terre natale, inspira la phenomenologie de Husserl et de Heidegger. La philosophie de Merleau-Ponty ne se limite ee ce pendant a aucune ecole. Elle reste ouverte sur les problemes de son temps et notamment sur eeux ceux que, que, des des avant la penetration de la phenomenologie en France, posaient, en Allemagne et en Amerique, les sciences humaines: la psychologie dite de la Gestalt, le Ie behaviourisme, behaviourisme, la psychanalyse. psyehanalyse.
Download or read book Congresso Internazionale Su Grandi Opere Sotterranee written by and published by . This book was released on 1986 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesion between polymers and concrete Adh sion entre polym res et b ton written by H. R. Sasse and published by Springer. This book was released on 2013-11-27 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface Adhesion is a phenomenon architects and civil engineers are not very familiar with. In other disciplines knowledge about surface properties and the background of bonding energies is also far from satisfactory; nevertheless there are many important· applications in concrete engineering, where adhesion is necessary for success and durability. These include: - coating and painting - repair of concrete surfaces - bonding of fresh to old concrete - crack injection - glueing of precast elements - glueing of steel to concrete, etc. In 1981 RILEM established the technical committee 52-RAC 'Resin Adherence to Concrete'. The main aims of the committee's work were - to collect research results and practical experiences - to initiate and coordinate research programs - to develop, on a scientific base, test methods for field and for laboratory purposes. One of the results of the committee's work is a state-of-the-art report, which will be presented orally as a General Report at the International Symposium ISAP '86, and will be printed either in the RILEM journal Materials and Structures or separately. Several test recommendations have been elaborated and will be prepared as drafts for the participants ofISAP '86. These are: - direct tensile test - pull-off test - direct shear test - slant shear test - four-point bending test - dynamic loading test - thermal compatibility test (two versions) - injectibility test.
